[PATCH tip/x86/fpu 1/6] x86/fpu: simplify the switch_fpu_prepare() + switch_fpu_finish() logic

[Oleg Nesterov <oleg@redhat.com>]

Now that switch_fpu_finish() doesn't load the FPU state, it makes more
sense to fold it into switch_fpu_prepare() renamed to switch_fpu(), and
more importantly, use the "prev_p" task as a target for TIF_NEED_FPU_LOAD.
It doesn't make any sense to delay set_tsk_thread_flag(TIF_NEED_FPU_LOAD)
until "prev_p" is scheduled again.

There is no worry about the very first context switch, fpu_clone() must
always set TIF_NEED_FPU_LOAD.

Also, shift the test_tsk_thread_flag(TIF_NEED_FPU_LOAD) from the callers
to switch_fpu().

Note that the "PF_KTHREAD | PF_USER_WORKER" check can be removed but
this deserves a separate patch which can change more functions, say,
kernel_fpu_begin_mask().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
---
 arch/x86/include/asm/fpu/sched.h | 34 +++++++++-----------------------
 arch/x86/kernel/process_32.c     |  5 +----
 arch/x86/kernel/process_64.c     |  5 +----
 3 files changed, 11 insertions(+), 33 deletions(-)

diff --git a/arch/x86/include/asm/fpu/sched.h b/arch/x86/include/asm/fpu/sched.h
index 5fd12634bcc4..c060549c6c94 100644
--- a/arch/x86/include/asm/fpu/sched.h
+++ b/arch/x86/include/asm/fpu/sched.h
@@ -18,31 +18,25 @@ extern void fpu_flush_thread(void);
 /*
  * FPU state switching for scheduling.
  *
- * This is a two-stage process:
+ * switch_fpu() saves the old state and sets TIF_NEED_FPU_LOAD if
+ * TIF_NEED_FPU_LOAD is not set.  This is done within the context
+ * of the old process.
  *
- *  - switch_fpu_prepare() saves the old state.
- *    This is done within the context of the old process.
- *
- *  - switch_fpu_finish() sets TIF_NEED_FPU_LOAD; the floating point state
- *    will get loaded on return to userspace, or when the kernel needs it.
- *
- * If TIF_NEED_FPU_LOAD is cleared then the CPU's FPU registers
- * are saved in the current thread's FPU register state.
- *
- * If TIF_NEED_FPU_LOAD is set then CPU's FPU registers may not
- * hold current()'s FPU registers. It is required to load the
+ * Once TIF_NEED_FPU_LOAD is set, it is required to load the
  * registers before returning to userland or using the content
  * otherwise.
  *
  * The FPU context is only stored/restored for a user task and
  * PF_KTHREAD is used to distinguish between kernel and user threads.
  */
-static inline void switch_fpu_prepare(struct task_struct *old, int cpu)
+static inline void switch_fpu(struct task_struct *old, int cpu)
 {
-	if (cpu_feature_enabled(X86_FEATURE_FPU) &&
+	if (!test_tsk_thread_flag(old, TIF_NEED_FPU_LOAD) &&
+	    cpu_feature_enabled(X86_FEATURE_FPU) &&
 	    !(old->flags & (PF_KTHREAD | PF_USER_WORKER))) {
 		struct fpu *old_fpu = x86_task_fpu(old);
 
+		set_tsk_thread_flag(old, TIF_NEED_FPU_LOAD);
 		save_fpregs_to_fpstate(old_fpu);
 		/*
 		 * The save operation preserved register state, so the
@@ -50,7 +44,7 @@ static inline void switch_fpu_prepare(struct task_struct *old, int cpu)
 		 * current CPU number in @old_fpu, so the next return
 		 * to user space can avoid the FPU register restore
 		 * when is returns on the same CPU and still owns the
-		 * context.
+		 * context. See fpregs_restore_userregs().
 		 */
 		old_fpu->last_cpu = cpu;
 
@@ -58,14 +52,4 @@ static inline void switch_fpu_prepare(struct task_struct *old, int cpu)
 	}
 }
 
-/*
- * Delay loading of the complete FPU state until the return to userland.
- * PKRU is handled separately.
- */
-static inline void switch_fpu_finish(struct task_struct *new)
-{
-	if (cpu_feature_enabled(X86_FEATURE_FPU))
-		set_tsk_thread_flag(new, TIF_NEED_FPU_LOAD);
-}
-
 #endif /* _ASM_X86_FPU_SCHED_H */
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 4636ef359973..9bd4fa694da5 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -160,8 +160,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 
 	/* never put a printk in __switch_to... printk() calls wake_up*() indirectly */
 
-	if (!test_tsk_thread_flag(prev_p, TIF_NEED_FPU_LOAD))
-		switch_fpu_prepare(prev_p, cpu);
+	switch_fpu(prev_p, cpu);
 
 	/*
 	 * Save away %gs. No need to save %fs, as it was saved on the
@@ -208,8 +207,6 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 
 	raw_cpu_write(current_task, next_p);
 
-	switch_fpu_finish(next_p);
-
 	/* Load the Intel cache allocation PQR MSR. */
 	resctrl_sched_in(next_p);
 
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 7196ca7048be..d55310d3133c 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -616,8 +616,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	WARN_ON_ONCE(IS_ENABLED(CONFIG_DEBUG_ENTRY) &&
 		     this_cpu_read(hardirq_stack_inuse));
 
-	if (!test_tsk_thread_flag(prev_p, TIF_NEED_FPU_LOAD))
-		switch_fpu_prepare(prev_p, cpu);
+	switch_fpu(prev_p, cpu);
 
 	/* We must save %fs and %gs before load_TLS() because
 	 * %fs and %gs may be cleared by load_TLS().
@@ -671,8 +670,6 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	raw_cpu_write(current_task, next_p);
 	raw_cpu_write(cpu_current_top_of_stack, task_top_of_stack(next_p));
 
-	switch_fpu_finish(next_p);
-
 	/* Reload sp0. */
 	update_task_stack(next_p);
 
-- 
2.25.1.362.g51ebf55