mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Rob Herring (Arm)" <robh@kernel.org>
To: Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH] dt-bindings: clock: Drop maxim,max77686.txt
Date: Mon,  5 May 2025 11:19:42 -0500	[thread overview]
Message-ID: <20250505161943.1433081-1-robh@kernel.org> (raw)

The clock binding for Maxim MAX77686/MAX77802/MAX77620 is already
covered by mfd/maxim,max77686.yaml.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 .../bindings/clock/maxim,max77686.txt         | 114 ------------------
 MAINTAINERS                                   |   1 -
 2 files changed, 115 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/maxim,max77686.txt

diff --git a/Documentation/devicetree/bindings/clock/maxim,max77686.txt b/Documentation/devicetree/bindings/clock/maxim,max77686.txt
deleted file mode 100644
index c10849efb444..000000000000
--- a/Documentation/devicetree/bindings/clock/maxim,max77686.txt
+++ /dev/null
@@ -1,114 +0,0 @@
-Binding for Maxim MAX77686/MAX77802/MAX77620 32k clock generator block
-
-This is a part of device tree bindings of MAX77686/MAX77802/MAX77620
-multi-function device. More information can be found in MFD DT binding
-doc as follows:
-	bindings/mfd/max77686.txt for MAX77686 and
-	bindings/mfd/max77802.txt for MAX77802 and
-	bindings/mfd/max77620.txt for MAX77620.
-
-The MAX77686 contains three 32.768khz clock outputs that can be controlled
-(gated/ungated) over I2C. Clocks are defined as preprocessor macros in
-dt-bindings/clock/maxim,max77686.h.
-
-
-The MAX77802 contains two 32.768khz clock outputs that can be controlled
-(gated/ungated) over I2C. Clocks are defined as preprocessor macros in
-dt-bindings/clock/maxim,max77802.h.
-
-The MAX77686 contains one 32.768khz clock outputs that can be controlled
-(gated/ungated) over I2C. Clocks are defined as preprocessor macros in
-dt-bindings/clock/maxim,max77620.h.
-
-Following properties should be presend in main device node of the MFD chip.
-
-Required properties:
-
-- #clock-cells: from common clock binding; shall be set to 1.
-
-Optional properties:
-- clock-output-names: From common clock binding.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. Following indices are allowed:
-    - 0: 32khz_ap clock (max77686, max77802), 32khz_out0 (max77620)
-    - 1: 32khz_cp clock (max77686, max77802),
-    - 2: 32khz_pmic clock (max77686).
-
-Clocks are defined as preprocessor macros in above dt-binding header for
-respective chips.
-
-Example:
-
-1. With MAX77686:
-
-#include <dt-bindings/clock/maxim,max77686.h>
-/* ... */
-
-	Node of the MFD chip
-		max77686: max77686@9 {
-			compatible = "maxim,max77686";
-			interrupt-parent = <&wakeup_eint>;
-			interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
-			reg = <0x09>;
-			#clock-cells = <1>;
-
-			/* ... */
-		};
-
-	Clock consumer node
-
-		foo@0 {
-			compatible = "bar,foo";
-			/* ... */
-			clock-names = "my-clock";
-			clocks = <&max77686 MAX77686_CLK_PMIC>;
-		};
-
-2. With MAX77802:
-
-#include <dt-bindings/clock/maxim,max77802.h>
-/* ... */
-
-	Node of the MFD chip
-		max77802: max77802@9 {
-			compatible = "maxim,max77802";
-			interrupt-parent = <&wakeup_eint>;
-			interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
-			reg = <0x09>;
-			#clock-cells = <1>;
-
-			/* ... */
-		};
-
-	Clock consumer node
-
-		foo@0 {
-			compatible = "bar,foo";
-			/* ... */
-			clock-names = "my-clock";
-			clocks = <&max77802 MAX77802_CLK_32K_AP>;
-		};
-
-
-3. With MAX77620:
-
-#include <dt-bindings/clock/maxim,max77620.h>
-/* ... */
-
-	Node of the MFD chip
-		max77620: max77620@3c {
-			compatible = "maxim,max77620";
-			reg = <0x3c>;
-			#clock-cells = <1>;
-			/* ... */
-		};
-
-	Clock consumer node
-
-		foo@0 {
-			compatible = "bar,foo";
-			/* ... */
-			clock-names = "my-clock";
-			clocks = <&max77620 MAX77620_CLK_32K_OUT0>;
-		};
diff --git a/MAINTAINERS b/MAINTAINERS
index cf5d0b25e94b..d25ddbf312c2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14610,7 +14610,6 @@ F:	Documentation/devicetree/bindings/*/maxim,max77686.yaml
 F:	Documentation/devicetree/bindings/*/maxim,max77693.yaml
 F:	Documentation/devicetree/bindings/*/maxim,max77705*.yaml
 F:	Documentation/devicetree/bindings/*/maxim,max77843.yaml
-F:	Documentation/devicetree/bindings/clock/maxim,max77686.txt
 F:	drivers/leds/leds-max77705.c
 F:	drivers/*/*max77843.c
 F:	drivers/*/max14577*.c
-- 
2.47.2


             reply	other threads:[~2025-05-05 16:19 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-05-05 16:19 Rob Herring (Arm) [this message]
2025-05-05 19:05 ` Krzysztof Kozlowski
2025-05-06 21:10 ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250505161943.1433081-1-robh@kernel.org \
    --to=robh@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome