From: Chao Yu <chao@kernel.org>
To: jaegeuk@kernel.org
Cc: linux-f2fs-devel@lists.sourceforge.net,
linux-kernel@vger.kernel.org, Chao Yu <chao@kernel.org>
Subject: [PATCH] f2fs: fix 32-bits hexademical number in fault injection doc
Date: Mon, 12 May 2025 19:55:14 +0800 [thread overview]
Message-ID: <20250512115514.2641059-1-chao@kernel.org> (raw)
FAULT_KMALLOC 0x000000001
There is one redundant '0' in 32-bits hexademical number of fault type,
remove it.
Signed-off-by: Chao Yu <chao@kernel.org>
---
Documentation/ABI/testing/sysfs-fs-f2fs | 52 ++++++++++++-------------
Documentation/filesystems/f2fs.rst | 52 ++++++++++++-------------
2 files changed, 52 insertions(+), 52 deletions(-)
diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs
index feafb36fd921..e060798f9fc1 100644
--- a/Documentation/ABI/testing/sysfs-fs-f2fs
+++ b/Documentation/ABI/testing/sysfs-fs-f2fs
@@ -710,33 +710,33 @@ Description: Support configuring fault injection type, should be
enabled with fault_injection option, fault type value
is shown below, it supports single or combined type.
- =========================== ===========
+ =========================== ==========
Type_Name Type_Value
- =========================== ===========
- FAULT_KMALLOC 0x000000001
- FAULT_KVMALLOC 0x000000002
- FAULT_PAGE_ALLOC 0x000000004
- FAULT_PAGE_GET 0x000000008
- FAULT_ALLOC_BIO 0x000000010 (obsolete)
- FAULT_ALLOC_NID 0x000000020
- FAULT_ORPHAN 0x000000040
- FAULT_BLOCK 0x000000080
- FAULT_DIR_DEPTH 0x000000100
- FAULT_EVICT_INODE 0x000000200
- FAULT_TRUNCATE 0x000000400
- FAULT_READ_IO 0x000000800
- FAULT_CHECKPOINT 0x000001000
- FAULT_DISCARD 0x000002000
- FAULT_WRITE_IO 0x000004000
- FAULT_SLAB_ALLOC 0x000008000
- FAULT_DQUOT_INIT 0x000010000
- FAULT_LOCK_OP 0x000020000
- FAULT_BLKADDR_VALIDITY 0x000040000
- FAULT_BLKADDR_CONSISTENCE 0x000080000
- FAULT_NO_SEGMENT 0x000100000
- FAULT_INCONSISTENT_FOOTER 0x000200000
- FAULT_TIMEOUT 0x000400000 (1000ms)
- =========================== ===========
+ =========================== ==========
+ FAULT_KMALLOC 0x00000001
+ FAULT_KVMALLOC 0x00000002
+ FAULT_PAGE_ALLOC 0x00000004
+ FAULT_PAGE_GET 0x00000008
+ FAULT_ALLOC_BIO 0x00000010 (obsolete)
+ FAULT_ALLOC_NID 0x00000020
+ FAULT_ORPHAN 0x00000040
+ FAULT_BLOCK 0x00000080
+ FAULT_DIR_DEPTH 0x00000100
+ FAULT_EVICT_INODE 0x00000200
+ FAULT_TRUNCATE 0x00000400
+ FAULT_READ_IO 0x00000800
+ FAULT_CHECKPOINT 0x00001000
+ FAULT_DISCARD 0x00002000
+ FAULT_WRITE_IO 0x00004000
+ FAULT_SLAB_ALLOC 0x00008000
+ FAULT_DQUOT_INIT 0x00010000
+ FAULT_LOCK_OP 0x00020000
+ FAULT_BLKADDR_VALIDITY 0x00040000
+ FAULT_BLKADDR_CONSISTENCE 0x00080000
+ FAULT_NO_SEGMENT 0x00100000
+ FAULT_INCONSISTENT_FOOTER 0x00200000
+ FAULT_TIMEOUT 0x00400000 (1000ms)
+ =========================== ==========
What: /sys/fs/f2fs/<disk>/discard_io_aware_gran
Date: January 2023
diff --git a/Documentation/filesystems/f2fs.rst b/Documentation/filesystems/f2fs.rst
index 157743ab107d..724fc5e2889a 100644
--- a/Documentation/filesystems/f2fs.rst
+++ b/Documentation/filesystems/f2fs.rst
@@ -182,33 +182,33 @@ fault_type=%d Support configuring fault injection type, should be
enabled with fault_injection option, fault type value
is shown below, it supports single or combined type.
- =========================== ===========
+ =========================== ==========
Type_Name Type_Value
- =========================== ===========
- FAULT_KMALLOC 0x000000001
- FAULT_KVMALLOC 0x000000002
- FAULT_PAGE_ALLOC 0x000000004
- FAULT_PAGE_GET 0x000000008
- FAULT_ALLOC_BIO 0x000000010 (obsolete)
- FAULT_ALLOC_NID 0x000000020
- FAULT_ORPHAN 0x000000040
- FAULT_BLOCK 0x000000080
- FAULT_DIR_DEPTH 0x000000100
- FAULT_EVICT_INODE 0x000000200
- FAULT_TRUNCATE 0x000000400
- FAULT_READ_IO 0x000000800
- FAULT_CHECKPOINT 0x000001000
- FAULT_DISCARD 0x000002000
- FAULT_WRITE_IO 0x000004000
- FAULT_SLAB_ALLOC 0x000008000
- FAULT_DQUOT_INIT 0x000010000
- FAULT_LOCK_OP 0x000020000
- FAULT_BLKADDR_VALIDITY 0x000040000
- FAULT_BLKADDR_CONSISTENCE 0x000080000
- FAULT_NO_SEGMENT 0x000100000
- FAULT_INCONSISTENT_FOOTER 0x000200000
- FAULT_TIMEOUT 0x000400000 (1000ms)
- =========================== ===========
+ =========================== ==========
+ FAULT_KMALLOC 0x00000001
+ FAULT_KVMALLOC 0x00000002
+ FAULT_PAGE_ALLOC 0x00000004
+ FAULT_PAGE_GET 0x00000008
+ FAULT_ALLOC_BIO 0x00000010 (obsolete)
+ FAULT_ALLOC_NID 0x00000020
+ FAULT_ORPHAN 0x00000040
+ FAULT_BLOCK 0x00000080
+ FAULT_DIR_DEPTH 0x00000100
+ FAULT_EVICT_INODE 0x00000200
+ FAULT_TRUNCATE 0x00000400
+ FAULT_READ_IO 0x00000800
+ FAULT_CHECKPOINT 0x00001000
+ FAULT_DISCARD 0x00002000
+ FAULT_WRITE_IO 0x00004000
+ FAULT_SLAB_ALLOC 0x00008000
+ FAULT_DQUOT_INIT 0x00010000
+ FAULT_LOCK_OP 0x00020000
+ FAULT_BLKADDR_VALIDITY 0x00040000
+ FAULT_BLKADDR_CONSISTENCE 0x00080000
+ FAULT_NO_SEGMENT 0x00100000
+ FAULT_INCONSISTENT_FOOTER 0x00200000
+ FAULT_TIMEOUT 0x00400000 (1000ms)
+ =========================== ==========
mode=%s Control block allocation mode which supports "adaptive"
and "lfs". In "lfs" mode, there should be no random
writes towards main area.
--
2.49.0
next reply other threads:[~2025-05-12 11:55 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-12 11:55 Chao Yu [this message]
2025-05-14 15:40 ` [f2fs-dev] " patchwork-bot+f2fs
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250512115514.2641059-1-chao@kernel.org \
--to=chao@kernel.org \
--cc=jaegeuk@kernel.org \
--cc=linux-f2fs-devel@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®