From: Shengjiu Wang <shengjiu.wang@nxp.com>
To: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
shawnguo@kernel.org, s.hauer@pengutronix.de,
kernel@pengutronix.de, festevam@gmail.com,
devicetree@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, shengjiu.wang@gmail.com,
carlos.song@nxp.com
Subject: [PATCH 2/6] arm64: dts: imx943-evk: add lpi2c support
Date: Thu, 15 May 2025 13:18:56 +0800 [thread overview]
Message-ID: <20250515051900.2353627-3-shengjiu.wang@nxp.com> (raw)
In-Reply-To: <20250515051900.2353627-1-shengjiu.wang@nxp.com>
From: Carlos Song <carlos.song@nxp.com>
Add lpi2c and i2c-mux support for imx943 evk board.
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
arch/arm64/boot/dts/freescale/imx943-evk.dts | 132 +++++++++++++++++++
1 file changed, 132 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx943-evk.dts b/arch/arm64/boot/dts/freescale/imx943-evk.dts
index cc8f3e6a1789..a566b9d8b813 100644
--- a/arch/arm64/boot/dts/freescale/imx943-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx943-evk.dts
@@ -12,6 +12,9 @@ / {
model = "NXP i.MX943 EVK board";
aliases {
+ i2c2 = &lpi2c3;
+ i2c3 = &lpi2c4;
+ i2c5 = &lpi2c6;
mmc0 = &usdhc1;
mmc1 = &usdhc2;
serial0 = &lpuart1;
@@ -53,6 +56,113 @@ memory@80000000 {
};
};
+&lpi2c3 {
+ clock-frequency = <400000>;
+ pinctrl-0 = <&pinctrl_lpi2c3>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ pca9548_i2c3: i2c-mux@77 {
+ compatible = "nxp,pca9548";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@5 {
+ reg = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@6 {
+ reg = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@7 {
+ reg = <7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&lpi2c4 {
+ clock-frequency = <400000>;
+ pinctrl-0 = <&pinctrl_lpi2c4>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&lpi2c6 {
+ clock-frequency = <400000>;
+ pinctrl-0 = <&pinctrl_lpi2c6>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ pca9544_i2c6: i2c-mux@77 {
+ compatible = "nxp,pca9544";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
&lpuart1 {
pinctrl-0 = <&pinctrl_uart1>;
pinctrl-names = "default";
@@ -60,6 +170,28 @@ &lpuart1 {
};
&scmi_iomuxc {
+
+ pinctrl_lpi2c3: lpi2c3grp {
+ fsl,pins = <
+ IMX94_PAD_GPIO_IO16__LPI2C3_SDA 0x40000b9e
+ IMX94_PAD_GPIO_IO17__LPI2C3_SCL 0x40000b9e
+ >;
+ };
+
+ pinctrl_lpi2c4: lpi2c4grp {
+ fsl,pins = <
+ IMX94_PAD_GPIO_IO18__LPI2C4_SDA 0x40000b9e
+ IMX94_PAD_GPIO_IO19__LPI2C4_SCL 0x40000b9e
+ >;
+ };
+
+ pinctrl_lpi2c6: lpi2c6grp {
+ fsl,pins = <
+ IMX94_PAD_GPIO_IO29__LPI2C6_SDA 0x40000b9e
+ IMX94_PAD_GPIO_IO28__LPI2C6_SCL 0x40000b9e
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
IMX94_PAD_UART1_TXD__LPUART1_TX 0x31e
--
2.34.1
next prev parent reply other threads:[~2025-05-15 5:21 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-15 5:18 [PATCH 0/6] arm64: dts: imx943: Add sound card support Shengjiu Wang
2025-05-15 5:18 ` [PATCH 1/6] arm64: dts: imx94: Add micfil and mqs device nodes Shengjiu Wang
2025-05-15 10:21 ` Daniel Baluta
2025-05-15 10:23 ` Shengjiu Wang
2025-05-19 18:42 ` Frank Li
2025-05-15 5:18 ` Shengjiu Wang [this message]
2025-05-19 18:44 ` [PATCH 2/6] arm64: dts: imx943-evk: add lpi2c support Frank Li
2025-05-15 5:18 ` [PATCH 3/6] arm64: dts: imx943-evk: add i2c io expander support Shengjiu Wang
2025-05-19 18:47 ` Frank Li
2025-05-15 5:18 ` [PATCH 4/6] arm64: dts: imx943-evk: add sound-wm8962 support Shengjiu Wang
2025-05-19 18:52 ` Frank Li
2025-05-15 5:18 ` [PATCH 5/6] arm64: dts: imx943-evk: add bt-sco sound card support Shengjiu Wang
2025-05-19 18:54 ` Frank Li
2025-05-15 5:19 ` [PATCH 6/6] arm64: dts: imx943-evk: Add PDM microphone " Shengjiu Wang
2025-05-19 19:09 ` Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250515051900.2353627-3-shengjiu.wang@nxp.com \
--to=shengjiu.wang@nxp.com \
--cc=carlos.song@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=shengjiu.wang@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®