From: Sean Christopherson <seanjc@google.com>
To: Sean Christopherson <seanjc@google.com>,
Paolo Bonzini <pbonzini@redhat.com>,
Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: kvm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 01/15] KVM: x86: Trigger I/O APIC route rescan in kvm_arch_irq_routing_update()
Date: Mon, 19 May 2025 16:27:54 -0700 [thread overview]
Message-ID: <20250519232808.2745331-2-seanjc@google.com> (raw)
In-Reply-To: <20250519232808.2745331-1-seanjc@google.com>
Trigger the I/O APIC route rescan that's performed for a split IRQ chip
after userspace updates IRQ routes in kvm_arch_irq_routing_update(), i.e.
before dropping kvm->irq_lock. Calling kvm_make_all_cpus_request() under
a mutex is perfectly safe, and the smp_wmb()+smp_mb__after_atomic() pair
in __kvm_make_request()+kvm_check_request() ensures the new routing is
visible to vCPUs prior to the request being visible to vCPUs.
In all likelihood, commit b053b2aef25d ("KVM: x86: Add EOI exit bitmap
inference") somewhat arbitrarily made the request outside of irq_lock to
avoid holding irq_lock any longer than is strictly necessary. And then
commit abdb080f7ac8 ("kvm/irqchip: kvm_arch_irq_routing_update renaming
split") took the easy route of adding another arch hook instead of risking
a functional change.
Note, the call to synchronize_srcu_expedited() does NOT provide ordering
guarantees with respect to vCPUs scanning the new routing; as above, the
request infrastructure provides the necessary ordering. I.e. there's no
need to wait for kvm_scan_ioapic_routes() to complete if it's actively
running, because regardless of whether it grabs the old or new table, the
vCPU will have another KVM_REQ_SCAN_IOAPIC pending, i.e. will rescan again
and see the new mappings.
Signed-off-by: Sean Christopherson <seanjc@google.com>
---
arch/x86/kvm/irq_comm.c | 10 +++-------
include/linux/kvm_host.h | 4 ----
virt/kvm/irqchip.c | 2 --
3 files changed, 3 insertions(+), 13 deletions(-)
diff --git a/arch/x86/kvm/irq_comm.c b/arch/x86/kvm/irq_comm.c
index d6d792b5d1bd..e2ae62ff9cc2 100644
--- a/arch/x86/kvm/irq_comm.c
+++ b/arch/x86/kvm/irq_comm.c
@@ -395,13 +395,6 @@ int kvm_setup_default_irq_routing(struct kvm *kvm)
ARRAY_SIZE(default_routing), 0);
}
-void kvm_arch_post_irq_routing_update(struct kvm *kvm)
-{
- if (!irqchip_split(kvm))
- return;
- kvm_make_scan_ioapic_request(kvm);
-}
-
void kvm_scan_ioapic_irq(struct kvm_vcpu *vcpu, u32 dest_id, u16 dest_mode,
u8 vector, unsigned long *ioapic_handled_vectors)
{
@@ -466,4 +459,7 @@ void kvm_arch_irq_routing_update(struct kvm *kvm)
#ifdef CONFIG_KVM_HYPERV
kvm_hv_irq_routing_update(kvm);
#endif
+
+ if (irqchip_split(kvm))
+ kvm_make_scan_ioapic_request(kvm);
}
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index c685fb417e92..963e250664d6 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -1020,14 +1020,10 @@ void vcpu_put(struct kvm_vcpu *vcpu);
#ifdef __KVM_HAVE_IOAPIC
void kvm_arch_post_irq_ack_notifier_list_update(struct kvm *kvm);
-void kvm_arch_post_irq_routing_update(struct kvm *kvm);
#else
static inline void kvm_arch_post_irq_ack_notifier_list_update(struct kvm *kvm)
{
}
-static inline void kvm_arch_post_irq_routing_update(struct kvm *kvm)
-{
-}
#endif
#ifdef CONFIG_HAVE_KVM_IRQCHIP
diff --git a/virt/kvm/irqchip.c b/virt/kvm/irqchip.c
index 162d8ed889f2..6ccabfd32287 100644
--- a/virt/kvm/irqchip.c
+++ b/virt/kvm/irqchip.c
@@ -222,8 +222,6 @@ int kvm_set_irq_routing(struct kvm *kvm,
kvm_arch_irq_routing_update(kvm);
mutex_unlock(&kvm->irq_lock);
- kvm_arch_post_irq_routing_update(kvm);
-
synchronize_srcu_expedited(&kvm->irq_srcu);
new = old;
--
2.49.0.1101.gccaa498523-goog
next prev parent reply other threads:[~2025-05-19 23:28 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-19 23:27 [PATCH 00/15] KVM: x86: Add I/O APIC kconfig, delete irq_comm.c Sean Christopherson
2025-05-19 23:27 ` Sean Christopherson [this message]
2025-05-19 23:27 ` [PATCH 02/15] KVM: x86: Drop superfluous kvm_set_pic_irq() => kvm_pic_set_irq() wrapper Sean Christopherson
2025-05-19 23:27 ` [PATCH 03/15] KVM: x86: Drop superfluous kvm_set_ioapic_irq() => kvm_ioapic_set_irq() wrapper Sean Christopherson
2025-05-19 23:27 ` [PATCH 04/15] KVM: x86: Drop superfluous kvm_hv_set_sint() => kvm_hv_synic_set_irq() wrapper Sean Christopherson
2025-05-20 9:57 ` Vitaly Kuznetsov
2025-05-29 11:37 ` Huang, Kai
2025-05-29 14:39 ` Sean Christopherson
2025-05-29 22:34 ` Huang, Kai
2025-05-19 23:27 ` [PATCH 05/15] KVM: x86: Fold kvm_setup_default_irq_routing() into kvm_ioapic_init() Sean Christopherson
2025-06-04 16:43 ` Paolo Bonzini
2025-05-19 23:27 ` [PATCH 06/15] KVM: x86: Move kvm_{request,free}_irq_source_id() to i8254.c (PIT) Sean Christopherson
2025-05-19 23:28 ` [PATCH 07/15] KVM: x86: Hardcode the PIT IRQ source ID to '2' Sean Christopherson
2025-05-19 23:28 ` [PATCH 08/15] KVM: x86: Don't clear PIT's IRQ line status when destroying PIT Sean Christopherson
2025-05-29 11:41 ` Huang, Kai
2025-05-19 23:28 ` [PATCH 09/15] KVM: x86: Explicitly check for in-kernel PIC when getting ExtINT Sean Christopherson
2025-05-19 23:28 ` [PATCH 10/15] KVM: Move x86-only tracepoints to x86's trace.h Sean Christopherson
2025-05-19 23:28 ` [PATCH 11/15] KVM: x86: Add CONFIG_KVM_IOAPIC to allow disabling in-kernel I/O APIC Sean Christopherson
2025-05-29 11:55 ` Huang, Kai
2025-05-29 11:57 ` Huang, Kai
2025-05-29 14:31 ` Sean Christopherson
2025-05-29 22:51 ` Huang, Kai
2025-05-29 23:08 ` Sean Christopherson
2025-05-29 23:55 ` Huang, Kai
2025-06-04 16:54 ` Paolo Bonzini
2025-06-19 10:05 ` Naveen N Rao
2025-05-19 23:28 ` [PATCH 12/15] KVM: Squash two CONFIG_HAVE_KVM_IRQCHIP #ifdefs into one Sean Christopherson
2025-05-19 23:28 ` [PATCH 13/15] KVM: selftests: Fall back to split IRQ chip if full in-kernel chip is unsupported Sean Christopherson
2025-05-19 23:28 ` [PATCH 14/15] KVM: x86: Move IRQ mask notifier infrastructure to I/O APIC emulation Sean Christopherson
2025-05-19 23:28 ` [PATCH 15/15] KVM: x86: Fold irq_comm.c into irq.c Sean Christopherson
2025-05-29 11:58 ` [PATCH 00/15] KVM: x86: Add I/O APIC kconfig, delete irq_comm.c Huang, Kai
2025-06-04 16:56 ` Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250519232808.2745331-2-seanjc@google.com \
--to=seanjc@google.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=vkuznets@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®