Re: [PATCH v3] clocksource: timer-sp804: Fix read_current_timer() issue when clock source is not registered

[stephen.eta.zhou@gmail.com]

Hi Daniel,

On Wed, May 7, 2025 at 10:11:29AM +0200, Daniel Lezcano:
> #ifdef CONFIG_ARM
> static struct delay_timer delay;
> static unsigned long sp804_read_delay_timer_read(void)
> {
>         return sp804_read();
> }
> 
> static void sp804_register_delay_timer(int freq)
> {
>         delay.freq = freq;
>         delay.read_current_timer = sp804_read_delay_timer_read;
>         register_current_timer_delay(&delay);
> }
> #else
> static inline void sp804_register_delay_timer(int freq) {}
> #endif

Thank you for taking the time to help me improve this patch.

>>  static int __init sp804_clocksource_and_sched_clock_init(void __iomem *base,
>>                                                         const char *name,
>>                                                         struct clk *clk,
>> @@ -114,6 +127,10 @@ static int __init sp804_clocksource_and_sched_clock_init(void __iomem *base,
>>        if (rate < 0)
>>                return -EINVAL;
>> 
>> +#ifdef CONFIG_ARM
>> +     delay.freq = rate;
>> +#endif
> 
> drop the above
> 
>         sp804_register_delay_timer(rate);
>>        clkevt = sp804_clkevt_get(base);
>> 
>>        writel(0, clkevt->ctrl);
>> @@ -318,6 +335,12 @@ static int __init sp804_of_init(struct device_node *np, struct sp804_timer *time
>>                if (ret)
>>                        goto err;
>>        }
>> +
>> +#ifdef CONFIG_ARM
>> +     delay.read_current_timer = sp804_read_delay_timer_read;
>> +     register_current_timer_delay(&delay);
>> +#endif
>> +
> 
> drop the above

Thanks for your feedback.

I'll make the changes accordingly and send out v4 soon.

Best regards,
Stephen