[PATCH v2 net 2/2] net: lan743x: Fix PHY reset handling during initialization and WOL

[Thangaraj Samynathan <thangaraj.s@microchip.com>]

Remove lan743x_phy_init from lan743x_hardware_init as it resets the PHY
registers, causing WOL to fail on subsequent attempts. Add a call to
lan743x_hw_reset_phy in the probe function to ensure the PHY is reset
during device initialization.

Fixes: 23f0703c125be ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/net/ethernet/microchip/lan743x_main.c | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/microchip/lan743x_main.c b/drivers/net/ethernet/microchip/lan743x_main.c
index efa569b670cb..9d70b51ca91d 100644
--- a/drivers/net/ethernet/microchip/lan743x_main.c
+++ b/drivers/net/ethernet/microchip/lan743x_main.c
@@ -1346,11 +1346,6 @@ static int lan743x_hw_reset_phy(struct lan743x_adapter *adapter)
 				  50000, 1000000);
 }
 
-static int lan743x_phy_init(struct lan743x_adapter *adapter)
-{
-	return lan743x_hw_reset_phy(adapter);
-}
-
 static void lan743x_phy_interface_select(struct lan743x_adapter *adapter)
 {
 	u32 id_rev;
@@ -3534,10 +3529,6 @@ static int lan743x_hardware_init(struct lan743x_adapter *adapter,
 	if (ret)
 		return ret;
 
-	ret = lan743x_phy_init(adapter);
-	if (ret)
-		return ret;
-
 	ret = lan743x_ptp_init(adapter);
 	if (ret)
 		return ret;
@@ -3674,6 +3665,10 @@ static int lan743x_pcidev_probe(struct pci_dev *pdev,
 	if (ret)
 		goto cleanup_pci;
 
+	ret = lan743x_hw_reset_phy(adapter);
+	if (ret)
+		goto cleanup_pci;
+
 	ret = lan743x_hardware_init(adapter, pdev);
 	if (ret)
 		goto cleanup_pci;
-- 
2.25.1