Re: [PATCH v2 2/2] iio: adc: ad7606: add enabling of optional Vrefin voltage

[Jonathan Cameron <jic23@kernel.org>]

On Fri, 30 May 2025 10:39:27 -0500
David Lechner <dlechner@baylibre.com> wrote:

> On 5/30/25 9:27 AM, Angelo Dureghello wrote:
> > From: Angelo Dureghello <adureghello@baylibre.com>
> > 
> > Add optional refin voltage enabling. The property "refin-supply" is
> > already available and optional in the current fdt dt_schema.
> > 
> > Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Tweaked and applied. 

I also added:

Note that the driver does not need to take any actions if the supply
is not present because a pin strap is used to change the behavior
of the device if an external reference is connected.

To the description

(applied patch 1 as well)

> > ---
> >  drivers/iio/adc/ad7606.c | 5 +++++
> >  1 file changed, 5 insertions(+)
> > 
> > diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c
> > index 3bbe9c05b5edbc11e8016c995c6ab64104836e7b..4fd9638eb6e56f800c7c97425e45e04f269e3df7 100644
> > --- a/drivers/iio/adc/ad7606.c
> > +++ b/drivers/iio/adc/ad7606.c
> > @@ -1335,6 +1335,11 @@ int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
> >  		return dev_err_probe(dev, ret,
> >  				     "Failed to enable Vdrive supply\n");
> >  
> > +	ret = devm_regulator_get_enable_optional(dev, "refin");
> > +	if (ret && ret != -ENODEV)
> > +		return dev_err_probe(dev, ret,
> > +				     "failed to enable REFIN voltage\n");  
> 
> s/failed/Failed/
> s/voltage/supply/
> 
> to be consistent with AVcc and Vdrive messages
> 
> > +
> >  	st->chip_info = chip_info;
> >  
> >  	if (st->chip_info->oversampling_num) {
> >   
>