[PATCH AUTOSEL 5.15 06/43] drm/bridge: anx7625: change the gpiod_set_value API

[Sasha Levin <sashal@kernel.org>]

From: Ayushi Makhija <quic_amakhija@quicinc.com>

[ Upstream commit 50935044e58e563cdcfd556d62f27bc8744dd64e ]

Use gpiod_set_value_cansleep() instead of gpiod_set_value()
to fix the below call trace in the boot log:

[    5.690534] Call trace:
[    5.690536]  gpiod_set_value+0x40/0xa4
[    5.690540]  anx7625_runtime_pm_resume+0xa0/0x324 [anx7625]
[    5.690545]  __rpm_callback+0x48/0x1d8
[    5.690549]  rpm_callback+0x6c/0x78

Certain GPIO controllers require access via message-based buses
such as I2C or SPI, which may cause the GPIOs to enter a sleep
state. Therefore, use the gpiod_set_value_cansleep().

Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250505094245.2660750-7-quic_amakhija@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---

**YES** This commit should be backported to stable kernel trees.
**Detailed Analysis:** **1. Bug Fix Nature:** The commit fixes a real
runtime issue that produces call traces in the boot log. The commit
message clearly shows a call trace stack: ``` [ 5.690534] Call trace: [
5.690536] gpiod_set_value+0x40/0xa4 [ 5.690540]
anx7625_runtime_pm_resume+0xa0/0x324 [anx7625] ``` This indicates users
are experiencing actual crashes or warnings when using this driver with
certain GPIO controllers. **2. Small, Contained Fix:** The code changes
are minimal and surgical - only 4 lines changed, replacing
`gpiod_set_value()` with `gpiod_set_value_cansleep()` in the
`anx7625_power_on()` and `anx7625_power_standby()` functions: - Line
1260: `gpiod_set_value(ctx->pdata.gpio_p_on, 1)` →
`gpiod_set_value_cansleep(ctx->pdata.gpio_p_on, 1)` - Line 1263:
`gpiod_set_value(ctx->pdata.gpio_reset, 1)` →
`gpiod_set_value_cansleep(ctx->pdata.gpio_reset, 1)` - Line 1283:
`gpiod_set_value(ctx->pdata.gpio_reset, 0)` →
`gpiod_set_value_cansleep(ctx->pdata.gpio_reset, 0)` - Line 1285:
`gpiod_set_value(ctx->pdata.gpio_p_on, 0)` →
`gpiod_set_value_cansleep(ctx->pdata.gpio_p_on, 0)` **3. Well-
Established Pattern:** Looking at the similar commits provided as
reference, this exact type of GPIO API fix is common and consistently
handles the same underlying issue. All 5 similar commits (marked as "NO"
for backport) show the same pattern of switching from
`gpiod_set_value()` to `gpiod_set_value_cansleep()` to handle GPIO
controllers on message-based buses (I2C/SPI). **4. Technical
Correctness:** The fix is technically sound. These functions are called
during power management operations (`anx7625_power_on()` and
`anx7625_power_standby()`) where sleeping is acceptable and expected.
The `_cansleep` variant is the correct API when GPIO controllers might
be accessed via slow buses like I2C or SPI. **5. Low Risk:** The change
has minimal risk of regression. The `gpiod_set_value_cansleep()`
function provides the same functionality as `gpiod_set_value()` but
allows sleeping, making it safe to use in contexts where the original
was used incorrectly. **6. Critical Subsystem Impact:** This affects the
DRM bridge subsystem and display functionality. Users with anx7625
bridge chips connected to I2C GPIO expanders would experience boot-time
call traces, which is a user-visible issue that should be fixed in
stable kernels. **7. Real Hardware Impact:** The commit specifically
mentions "Certain GPIO controllers require access via message-based
buses such as I2C or SPI" - this is a real hardware configuration that
users deploy, not an edge case. This commit meets all the criteria for
stable backporting: it fixes a user-visible bug, has minimal risk, is
contained to a single driver, and follows an established pattern for
this type of GPIO API fix.

 drivers/gpu/drm/bridge/analogix/anx7625.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
index 01612d2c034af..257f69b5e1783 100644
--- a/drivers/gpu/drm/bridge/analogix/anx7625.c
+++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
@@ -920,10 +920,10 @@ static void anx7625_power_on(struct anx7625_data *ctx)
 	usleep_range(11000, 12000);
 
 	/* Power on pin enable */
-	gpiod_set_value(ctx->pdata.gpio_p_on, 1);
+	gpiod_set_value_cansleep(ctx->pdata.gpio_p_on, 1);
 	usleep_range(10000, 11000);
 	/* Power reset pin enable */
-	gpiod_set_value(ctx->pdata.gpio_reset, 1);
+	gpiod_set_value_cansleep(ctx->pdata.gpio_reset, 1);
 	usleep_range(10000, 11000);
 
 	DRM_DEV_DEBUG_DRIVER(dev, "power on !\n");
@@ -943,9 +943,9 @@ static void anx7625_power_standby(struct anx7625_data *ctx)
 		return;
 	}
 
-	gpiod_set_value(ctx->pdata.gpio_reset, 0);
+	gpiod_set_value_cansleep(ctx->pdata.gpio_reset, 0);
 	usleep_range(1000, 1100);
-	gpiod_set_value(ctx->pdata.gpio_p_on, 0);
+	gpiod_set_value_cansleep(ctx->pdata.gpio_p_on, 0);
 	usleep_range(1000, 1100);
 
 	ret = regulator_bulk_disable(ARRAY_SIZE(ctx->pdata.supplies),
-- 
2.39.5