[PATCH AUTOSEL 5.10 03/34] drm/bridge: analogix_dp: Add irq flag IRQF_NO_AUTOEN instead of calling disable_irq()

[Sasha Levin <sashal@kernel.org>]

From: Damon Ding <damon.ding@rock-chips.com>

[ Upstream commit efab13e7d13a641a22c7508cde6e1a5285161944 ]

The IRQF_NO_AUTOEN can be used for the drivers that don't want
interrupts to be enabled automatically via devm_request_threaded_irq().
Using this flag can provide be more robust compared to the way of
calling disable_irq() after devm_request_threaded_irq() without the
IRQF_NO_AUTOEN flag.

Suggested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Link: https://lore.kernel.org/r/20250310104114.2608063-2-damon.ding@rock-chips.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---

**YES** This commit should be backported to stable kernel trees based on
the following analysis: ## Code Change Analysis The commit makes a
simple, targeted fix to address a race condition in interrupt handling:
1. **Line 1639**: Changes `irq_flags = IRQF_TRIGGER_RISING |
IRQF_TRIGGER_FALLING;` to `irq_flags = IRQF_TRIGGER_RISING |
IRQF_TRIGGER_FALLING | IRQF_NO_AUTOEN;` 2. **Line 1642**: Changes
`irq_flags = 0;` to `irq_flags = IRQF_NO_AUTOEN;` 3. **Line 1659**:
Removes the `disable_irq(dp->irq);` call that was previously needed
after `devm_request_threaded_irq()` ## Backport Suitability Assessment
**Matches Stable Tree Criteria:** 1. **Fixes an Important Bug**: The
commit addresses a race condition where interrupts can fire between
`devm_request_threaded_irq()` and `disable_irq()`, which could cause
system instability or unexpected behavior. 2. **Small and Contained
Change**: The modification is minimal (3 lines changed) and affects only
the interrupt setup logic in `analogix_dp_core.c:1608-1659`. 3. **Low
Risk of Regression**: The change uses a well-established kernel pattern
(IRQF_NO_AUTOEN) that's been proven safe across multiple subsystems. 4.
**Clear Technical Merit**: As noted in the commit message, using
`IRQF_NO_AUTOEN` is "more robust compared to the way of calling
disable_irq() after devm_request_threaded_irq()". **Strong Precedent
from Similar Commits:** The analysis shows **ALL** similar commits in
the provided reference set have "Backport Status: YES": -
`drm/msm/adreno: Use IRQF_NO_AUTOEN flag in request_irq()` - **YES** -
`drm/imx/dcss: Use IRQF_NO_AUTOEN flag in request_irq()` (both
instances) - **YES** - `drm/imx/ipuv3: Use IRQF_NO_AUTOEN flag in
request_irq()` - **YES** - `drm/exynos: move to use request_irq by
IRQF_NO_AUTOEN flag` - **YES** **Additional Context from Kernel
Repository:** Examination of `/home/sasha/linux/drivers/gpu/drm/bridge/a
nalogix/analogix_dp_core.c:1659` confirms this follows the exact same
pattern as other successful backports - replacing the `request_irq()` +
`disable_irq()` sequence with `IRQF_NO_AUTOEN` flag usage. This is a
textbook example of a stable tree candidate: it fixes a real race
condition bug with minimal, proven-safe code changes that follow
established kernel patterns.

 drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index e8baa07450b7d..3d8f08d895612 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -1778,10 +1778,10 @@ analogix_dp_probe(struct device *dev, struct analogix_dp_plat_data *plat_data)
 		 * that we can get the current state of the GPIO.
 		 */
 		dp->irq = gpiod_to_irq(dp->hpd_gpiod);
-		irq_flags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING;
+		irq_flags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_NO_AUTOEN;
 	} else {
 		dp->irq = platform_get_irq(pdev, 0);
-		irq_flags = 0;
+		irq_flags = IRQF_NO_AUTOEN;
 	}
 
 	if (dp->irq == -ENXIO) {
@@ -1798,7 +1798,6 @@ analogix_dp_probe(struct device *dev, struct analogix_dp_plat_data *plat_data)
 		dev_err(&pdev->dev, "failed to request irq\n");
 		goto err_disable_clk;
 	}
-	disable_irq(dp->irq);
 
 	return dp;
 
-- 
2.39.5