From: Frank Li <Frank.Li@nxp.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Thinh Nguyen <Thinh.Nguyen@synopsys.com>,
Shawn Guo <shawnguo@kernel.org>
Cc: linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
bjorn.andersson@oss.qualcomm.com, Frank Li <Frank.Li@nxp.com>
Subject: [PATCH 0/3] usb: dwc3: add layerscape platform driver use flatten dwc3 core
Date: Mon, 02 Jun 2025 18:01:00 -0400 [thread overview]
Message-ID: <20250602-ls_dma_coherence-v1-0-c67484d6ab64@nxp.com> (raw)
Add layerscape platform driver use flatten dwc3 core to enable dma-coherence.
It needs set gsburstcfg0 to 0x2222.
There are some several try before:
[1] https://lore.kernel.org/imx/20240710-ls-dwc-v1-0-62f8cbed31d7@nxp.com/
[2] https://lore.kernel.org/imx/20240123170206.3702413-1-Frank.Li@nxp.com/
[2]: add new property, which was reject because there are no varience in
the soc. Fortunately the below commit resolve this problem by use software
managed property.
d504bfa6cfd1a usb: dwc3: enable CCI support for AMD-xilinx DWC3 controller
[1] was reject because there are not actually dwc wrap at layerscape
platform. Fortunately Bjorn Andersson's below patch to make it possible
by use correct dts dwc3 node layer out.
613a2e655d4dc usb: dwc3: core: Expose core driver as library
This resolve problem [1] and [2] by use flatten dwc3 core library.
1. add soc specific compatible string at dt-binding.
2. create platform driver for layerscape chips and pass down gsbuscfg0 if
dma-coherence enabled.
3. update layerscape dts files.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Frank Li (3):
dt-bindings: usb: add missed compatible string for arm64 layerscape
usb: dwc3: add layerscape dwc3 support
arm64: dts: layerscape: add dma-coherent for usb node
.../devicetree/bindings/usb/fsl,ls1028a.yaml | 33 ++++----
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 3 +-
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 8 +-
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 9 ++-
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 9 ++-
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 8 +-
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 8 +-
drivers/usb/dwc3/Kconfig | 10 +++
drivers/usb/dwc3/Makefile | 1 +
drivers/usb/dwc3/dwc3-layerscape.c | 88 ++++++++++++++++++++++
10 files changed, 149 insertions(+), 28 deletions(-)
---
base-commit: 66fda7d5293cdf86be0ef5bde9bf37205622dad2
change-id: 20250602-ls_dma_coherence-c3c2b6f79db2
Best regards,
---
Frank Li <Frank.Li@nxp.com>
next reply other threads:[~2025-06-02 22:01 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-02 22:01 Frank Li [this message]
2025-06-02 22:01 ` [PATCH 1/3] dt-bindings: usb: add missed compatible string for arm64 layerscape Frank Li
2025-06-25 18:38 ` Rob Herring (Arm)
2025-06-02 22:01 ` [PATCH 2/3] usb: dwc3: add layerscape dwc3 support Frank Li
2025-06-03 1:23 ` Thinh Nguyen
2025-06-03 14:59 ` Frank Li
2025-06-05 0:20 ` Thinh Nguyen
2025-09-19 21:17 ` Thinh Nguyen
2025-09-19 22:20 ` Frank Li
2025-06-02 22:01 ` [PATCH 3/3] arm64: dts: layerscape: add dma-coherent for usb node Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250602-ls_dma_coherence-v1-0-c67484d6ab64@nxp.com \
--to=frank.li@nxp.com \
--cc=Thinh.Nguyen@synopsys.com \
--cc=bjorn.andersson@oss.qualcomm.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=robh@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®