From: "Álvaro Fernández Rojas" <noltari@gmail.com>
To: jonas.gorski@gmail.com, florian.fainelli@broadcom.com,
andrew@lunn.ch, olteanv@gmail.com, davem@davemloft.net,
edumazet@google.com, kuba@kernel.org, pabeni@redhat.com,
vivien.didelot@gmail.com, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org, dgcbueu@gmail.com
Cc: "Álvaro Fernández Rojas" <noltari@gmail.com>
Subject: [RFC PATCH net-next v2 07/10] net: dsa: b53: prevent GMII_PORT_OVERRIDE_CTRL access on BCM5325
Date: Tue, 3 Jun 2025 22:48:55 +0200 [thread overview]
Message-ID: <20250603204858.72402-8-noltari@gmail.com> (raw)
In-Reply-To: <20250603204858.72402-1-noltari@gmail.com>
BCM5325 doesn't implement GMII_PORT_OVERRIDE_CTRL register so we should
avoid reading or writing it.
PORT_OVERRIDE_RX_FLOW and PORT_OVERRIDE_TX_FLOW aren't defined on BCM5325
and we should use PORT_OVERRIDE_LP_FLOW_25 instead.
Fixes: 5e004460f874 ("net: dsa: b53: Add helper to set link parameters")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
---
drivers/net/dsa/b53/b53_common.c | 21 +++++++++++++++++----
drivers/net/dsa/b53/b53_regs.h | 1 +
2 files changed, 18 insertions(+), 4 deletions(-)
v2: no changes.
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 693a44150395e..4cee69f29cf8d 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1277,6 +1277,8 @@ static void b53_force_link(struct b53_device *dev, int port, int link)
if (port == dev->imp_port) {
off = B53_PORT_OVERRIDE_CTRL;
val = PORT_OVERRIDE_EN;
+ } else if (is5325(dev)) {
+ return;
} else {
off = B53_GMII_PORT_OVERRIDE_CTRL(port);
val = GMII_PO_EN;
@@ -1301,6 +1303,8 @@ static void b53_force_port_config(struct b53_device *dev, int port,
if (port == dev->imp_port) {
off = B53_PORT_OVERRIDE_CTRL;
val = PORT_OVERRIDE_EN;
+ } else if (is5325(dev)) {
+ return;
} else {
off = B53_GMII_PORT_OVERRIDE_CTRL(port);
val = GMII_PO_EN;
@@ -1331,10 +1335,19 @@ static void b53_force_port_config(struct b53_device *dev, int port,
return;
}
- if (rx_pause)
- reg |= PORT_OVERRIDE_RX_FLOW;
- if (tx_pause)
- reg |= PORT_OVERRIDE_TX_FLOW;
+ if (rx_pause) {
+ if (is5325(dev))
+ reg |= PORT_OVERRIDE_LP_FLOW_25;
+ else
+ reg |= PORT_OVERRIDE_RX_FLOW;
+ }
+
+ if (tx_pause) {
+ if (is5325(dev))
+ reg |= PORT_OVERRIDE_LP_FLOW_25;
+ else
+ reg |= PORT_OVERRIDE_TX_FLOW;
+ }
b53_write8(dev, B53_CTRL_PAGE, off, reg);
}
diff --git a/drivers/net/dsa/b53/b53_regs.h b/drivers/net/dsa/b53/b53_regs.h
index 896684d7f5947..ab15f36a135a8 100644
--- a/drivers/net/dsa/b53/b53_regs.h
+++ b/drivers/net/dsa/b53/b53_regs.h
@@ -95,6 +95,7 @@
#define PORT_OVERRIDE_SPEED_10M (0 << PORT_OVERRIDE_SPEED_S)
#define PORT_OVERRIDE_SPEED_100M (1 << PORT_OVERRIDE_SPEED_S)
#define PORT_OVERRIDE_SPEED_1000M (2 << PORT_OVERRIDE_SPEED_S)
+#define PORT_OVERRIDE_LP_FLOW_25 BIT(3) /* BCM5325 only */
#define PORT_OVERRIDE_RV_MII_25 BIT(4) /* BCM5325 only */
#define PORT_OVERRIDE_RX_FLOW BIT(4)
#define PORT_OVERRIDE_TX_FLOW BIT(5)
--
2.39.5
next prev parent reply other threads:[~2025-06-03 20:49 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-03 20:48 [RFC PATCH net-next v2 00/10] net: dsa: b53: fix BCM5325 support Álvaro Fernández Rojas
2025-06-03 20:48 ` [RFC PATCH net-next v2 01/10] net: dsa: b53: add support for FDB operations on 5325/5365 Álvaro Fernández Rojas
2025-06-03 22:10 ` Florian Fainelli
2025-06-04 6:32 ` Jonas Gorski
2025-06-11 7:55 ` Álvaro Fernández Rojas
2025-06-03 20:48 ` [RFC PATCH net-next v2 02/10] net: dsa: b53: prevent FAST_AGE access on BCM5325 Álvaro Fernández Rojas
2025-06-03 20:48 ` [RFC PATCH net-next v2 03/10] net: dsa: b53: prevent SWITCH_CTRL " Álvaro Fernández Rojas
2025-06-03 20:48 ` [RFC PATCH net-next v2 04/10] net: dsa: b53: fix IP_MULTICAST_CTRL " Álvaro Fernández Rojas
2025-06-03 20:48 ` [RFC PATCH net-next v2 05/10] net: dsa: b53: prevent DIS_LEARNING access " Álvaro Fernández Rojas
2025-06-03 20:48 ` [RFC PATCH net-next v2 06/10] net: dsa: b53: prevent BRCM_HDR " Álvaro Fernández Rojas
2025-06-04 18:05 ` Jonas Gorski
2025-06-03 20:48 ` Álvaro Fernández Rojas [this message]
2025-06-03 20:48 ` [RFC PATCH net-next v2 08/10] net: dsa: b53: fix unicast/multicast flooding " Álvaro Fernández Rojas
2025-06-03 20:48 ` [RFC PATCH net-next v2 09/10] net: dsa: b53: fix b53_imp_vlan_setup for BCM5325 Álvaro Fernández Rojas
2025-06-03 20:48 ` [RFC PATCH net-next v2 10/10] net: dsa: b53: ensure BCM5325 PHYs are enabled Álvaro Fernández Rojas
2025-06-04 18:20 ` Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250603204858.72402-8-noltari@gmail.com \
--to=noltari@gmail.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=dgcbueu@gmail.com \
--cc=edumazet@google.com \
--cc=florian.fainelli@broadcom.com \
--cc=jonas.gorski@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®