From: "Rob Herring (Arm)" <robh@kernel.org>
To: Lee Jones <lee@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@kernel.org>,
Tony Lindgren <tony@atomide.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-phy@lists.infradead.org
Subject: [PATCH] dt-bindings: phy: Convert motorola,cpcap-usb-phy to DT schema
Date: Sat, 7 Jun 2025 16:26:15 -0500 [thread overview]
Message-ID: <20250607212616.743674-1-robh@kernel.org> (raw)
Convert the Motorola CPCAP PMIC USB PHY binding to DT schema format.
It's a straight forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
.../bindings/mfd/motorola-cpcap.txt | 2 +-
.../bindings/phy/motorola,cpcap-usb-phy.yaml | 107 ++++++++++++++++++
.../devicetree/bindings/phy/phy-cpcap-usb.txt | 40 -------
3 files changed, 108 insertions(+), 41 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml
delete mode 100644 Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt
diff --git a/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
index f00827c9b67f..18c3fc26ca93 100644
--- a/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
+++ b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
@@ -19,7 +19,7 @@ which are described in the following files:
- Documentation/devicetree/bindings/power/supply/cpcap-battery.yaml
- Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml
- Documentation/devicetree/bindings/regulator/cpcap-regulator.txt
-- Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt
+- Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml
- Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt
- Documentation/devicetree/bindings/rtc/cpcap-rtc.txt
- Documentation/devicetree/bindings/leds/leds-cpcap.txt
diff --git a/Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml b/Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml
new file mode 100644
index 000000000000..0febd04a61f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/motorola,cpcap-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Motorola CPCAP PMIC USB PHY
+
+maintainers:
+ - Tony Lindgren <tony@atomide.com>
+
+properties:
+ compatible:
+ enum:
+ - motorola,cpcap-usb-phy
+ - motorola,mapphone-cpcap-usb-phy
+
+ '#phy-cells':
+ const: 0
+
+ interrupts:
+ description: CPCAP PMIC interrupts used by the USB PHY
+ items:
+ - description: id_ground interrupt
+ - description: id_float interrupt
+ - description: se0conn interrupt
+ - description: vbusvld interrupt
+ - description: sessvld interrupt
+ - description: sessend interrupt
+ - description: se1 interrupt
+ - description: dm interrupt
+ - description: dp interrupt
+
+ interrupt-names:
+ description: Interrupt names
+ items:
+ - const: id_ground
+ - const: id_float
+ - const: se0conn
+ - const: vbusvld
+ - const: sessvld
+ - const: sessend
+ - const: se1
+ - const: dm
+ - const: dp
+
+ io-channels:
+ description: IIO ADC channels used by the USB PHY
+ items:
+ - description: vbus channel
+ - description: id channel
+
+ io-channel-names:
+ items:
+ - const: vbus
+ - const: id
+
+ vusb-supply: true
+
+ pinctrl-names:
+ items:
+ - const: default
+ - const: ulpi
+ - const: utmi
+ - const: uart
+
+ mode-gpios:
+ description: Optional GPIOs for configuring alternate modes
+ items:
+ - description: "mode selection GPIO #0"
+ - description: "mode selection GPIO #1"
+
+required:
+ - compatible
+ - '#phy-cells'
+ - interrupts-extended
+ - interrupt-names
+ - io-channels
+ - io-channel-names
+ - vusb-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ phy {
+ compatible = "motorola,mapphone-cpcap-usb-phy";
+ #phy-cells = <0>;
+ interrupts-extended = <
+ &cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0
+ &cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0
+ &cpcap 48 1
+ >;
+ interrupt-names = "id_ground", "id_float", "se0conn", "vbusvld",
+ "sessvld", "sessend", "se1", "dm", "dp";
+ io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>;
+ io-channel-names = "vbus", "id";
+ vusb-supply = <&vusb>;
+ pinctrl-0 = <&usb_gpio_mux_sel1 &usb_gpio_mux_sel2>;
+ pinctrl-1 = <&usb_ulpi_pins>;
+ pinctrl-2 = <&usb_utmi_pins>;
+ pinctrl-3 = <&uart3_pins>;
+ pinctrl-names = "default", "ulpi", "utmi", "uart";
+ mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ };
diff --git a/Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt b/Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt
deleted file mode 100644
index 2eb9b2b69037..000000000000
--- a/Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-Motorola CPCAP PMIC USB PHY binding
-
-Required properties:
-compatible: Shall be either "motorola,cpcap-usb-phy" or
- "motorola,mapphone-cpcap-usb-phy"
-#phy-cells: Shall be 0
-interrupts: CPCAP PMIC interrupts used by the USB PHY
-interrupt-names: Interrupt names
-io-channels: IIO ADC channels used by the USB PHY
-io-channel-names: IIO ADC channel names
-vusb-supply: Regulator for the PHY
-
-Optional properties:
-pinctrl: Optional alternate pin modes for the PHY
-pinctrl-names: Names for optional pin modes
-mode-gpios: Optional GPIOs for configuring alternate modes
-
-Example:
-cpcap_usb2_phy: phy {
- compatible = "motorola,mapphone-cpcap-usb-phy";
- pinctrl-0 = <&usb_gpio_mux_sel1 &usb_gpio_mux_sel2>;
- pinctrl-1 = <&usb_ulpi_pins>;
- pinctrl-2 = <&usb_utmi_pins>;
- pinctrl-3 = <&uart3_pins>;
- pinctrl-names = "default", "ulpi", "utmi", "uart";
- #phy-cells = <0>;
- interrupts-extended = <
- &cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0
- &cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0
- &cpcap 48 1
- >;
- interrupt-names =
- "id_ground", "id_float", "se0conn", "vbusvld",
- "sessvld", "sessend", "se1", "dm", "dp";
- mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH
- &gpio1 0 GPIO_ACTIVE_HIGH>;
- io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>;
- io-channel-names = "vbus", "id";
- vusb-supply = <&vusb>;
-};
--
2.47.2
reply other threads:[~2025-06-07 21:26 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250607212616.743674-1-robh@kernel.org \
--to=robh@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kishon@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lee@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=tony@atomide.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®