From: Junhui Liu <junhui.liu@pigmoral.tech>
To: Philipp Zabel <p.zabel@pengutronix.de>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Junhui Liu <junhui.liu@pigmoral.tech>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-riscv@lists.infradead.org,
Conor Dooley <conor.dooley@microchip.com>,
Chen Wang <unicorn_wang@outlook.com>
Subject: [PATCH v4 1/2] dt-bindings: reset: add support for canaan,k230-rst
Date: Fri, 13 Jun 2025 16:49:23 +0800 [thread overview]
Message-ID: <20250613-k230-reset-v4-1-e5266d2be440@pigmoral.tech> (raw)
In-Reply-To: <20250613-k230-reset-v4-0-e5266d2be440@pigmoral.tech>
Introduces a reset controller driver for the Kendryte K230 SoC,
resposible for managing the reset functionality of the CPUs and
various sub-modules.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
---
.../devicetree/bindings/reset/canaan,k230-rst.yaml | 39 ++++++++++
include/dt-bindings/reset/canaan,k230-rst.h | 90 ++++++++++++++++++++++
2 files changed, 129 insertions(+)
diff --git a/Documentation/devicetree/bindings/reset/canaan,k230-rst.yaml b/Documentation/devicetree/bindings/reset/canaan,k230-rst.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..d352d0e12d8106a232bb5e6d7e138697d2106937
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/canaan,k230-rst.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/canaan,k230-rst.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Canaan Kendryte K230 Reset Controller
+
+maintainers:
+ - Junhui Liu <junhui.liu@pigmoral.tech>
+
+description:
+ The Canaan Kendryte K230 reset controller is part of the SoC's system
+ controller and controls the reset registers for CPUs and various peripherals.
+
+properties:
+ compatible:
+ const: canaan,k230-rst
+
+ reg:
+ maxItems: 1
+
+ '#reset-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ reset-controller@91101000 {
+ compatible = "canaan,k230-rst";
+ reg = <0x91101000 0x1000>;
+ #reset-cells = <1>;
+ };
diff --git a/include/dt-bindings/reset/canaan,k230-rst.h b/include/dt-bindings/reset/canaan,k230-rst.h
new file mode 100644
index 0000000000000000000000000000000000000000..e4f6612607fea2faf2bcaa80add0b291c3371e4b
--- /dev/null
+++ b/include/dt-bindings/reset/canaan,k230-rst.h
@@ -0,0 +1,90 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) 2023-2024 Canaan Bright Sight Co., Ltd
+ * Copyright (C) 2024-2025 Junhui Liu <junhui.liu@pigmoral.tech>
+ */
+#ifndef _DT_BINDINGS_CANAAN_K230_RST_H_
+#define _DT_BINDINGS_CANAAN_K230_RST_H_
+
+#define RST_CPU0 0
+#define RST_CPU1 1
+#define RST_CPU0_FLUSH 2
+#define RST_CPU1_FLUSH 3
+#define RST_AI 4
+#define RST_VPU 5
+#define RST_HISYS 6
+#define RST_HISYS_AHB 7
+#define RST_SDIO0 8
+#define RST_SDIO1 9
+#define RST_SDIO_AXI 10
+#define RST_USB0 11
+#define RST_USB1 12
+#define RST_USB0_AHB 13
+#define RST_USB1_AHB 14
+#define RST_SPI0 15
+#define RST_SPI1 16
+#define RST_SPI2 17
+#define RST_SEC 18
+#define RST_PDMA 19
+#define RST_SDMA 20
+#define RST_DECOMPRESS 21
+#define RST_SRAM 22
+#define RST_SHRM_AXIM 23
+#define RST_SHRM_AXIS 24
+#define RST_NONAI2D 25
+#define RST_MCTL 26
+#define RST_ISP 27
+#define RST_ISP_DW 28
+#define RST_DPU 29
+#define RST_DISP 30
+#define RST_GPU 31
+#define RST_AUDIO 32
+#define RST_TIMER0 33
+#define RST_TIMER1 34
+#define RST_TIMER2 35
+#define RST_TIMER3 36
+#define RST_TIMER4 37
+#define RST_TIMER5 38
+#define RST_TIMER_APB 39
+#define RST_HDI 40
+#define RST_WDT0 41
+#define RST_WDT1 42
+#define RST_WDT0_APB 43
+#define RST_WDT1_APB 44
+#define RST_TS_APB 45
+#define RST_MAILBOX 46
+#define RST_STC 47
+#define RST_PMU 48
+#define RST_LOSYS_APB 49
+#define RST_UART0 50
+#define RST_UART1 51
+#define RST_UART2 52
+#define RST_UART3 53
+#define RST_UART4 54
+#define RST_I2C0 55
+#define RST_I2C1 56
+#define RST_I2C2 57
+#define RST_I2C3 58
+#define RST_I2C4 59
+#define RST_JAMLINK0_APB 60
+#define RST_JAMLINK1_APB 61
+#define RST_JAMLINK2_APB 62
+#define RST_JAMLINK3_APB 63
+#define RST_CODEC_APB 64
+#define RST_GPIO_DB 65
+#define RST_GPIO_APB 66
+#define RST_ADC 67
+#define RST_ADC_APB 68
+#define RST_PWM_APB 69
+#define RST_SHRM_APB 70
+#define RST_CSI0 71
+#define RST_CSI1 72
+#define RST_CSI2 73
+#define RST_CSI_DPHY 74
+#define RST_ISP_AHB 75
+#define RST_M0 76
+#define RST_M1 77
+#define RST_M2 78
+#define RST_SPI2AXI 79
+
+#endif
--
2.49.0
next prev parent reply other threads:[~2025-06-13 8:51 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-13 8:49 [PATCH v4 0/2] reset: canaan: add Kendryte K230 reset support Junhui Liu
2025-06-13 8:49 ` Junhui Liu [this message]
2025-06-13 8:49 ` [PATCH v4 2/2] reset: canaan: add reset driver for Kendryte K230 Junhui Liu
2025-06-17 6:24 ` [PATCH v4 0/2] reset: canaan: add Kendryte K230 reset support Chen Wang
2025-06-27 16:16 ` Philipp Zabel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250613-k230-reset-v4-1-e5266d2be440@pigmoral.tech \
--to=junhui.liu@pigmoral.tech \
--cc=conor+dt@kernel.org \
--cc=conor.dooley@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=unicorn_wang@outlook.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®