On Wed, Jun 18, 2025 at 02:34:57PM -0300, Marcelo Schmitt wrote:
> Add device tree documentation for AD4170 and similar sigma-delta ADCs.
> The AD4170 is a 24-bit, multichannel, sigma-delta ADC.
> 
> Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
> ---
> Change log v5 -> v6
> - Made reference-buffer string type.
> - Moved required section before patternProperties.
> - Made avss, refin1n, refin2n documentation open to accepting positive and
>   negative voltage specifications where appropriate.
> 
> The point of making avss-supply, refin1n-supply and refin2n-supply documentation
> open to negative voltage values is to allow device tree to specify the regulator
> true voltage level so the drivers won't need to workaround negative supplies in
> the future.
> 
>  .../bindings/iio/adc/adi,ad4170.yaml          | 558 ++++++++++++++++++
>  MAINTAINERS                                   |   7 +
>  2 files changed, 565 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad4170.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4170.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4170.yaml
> new file mode 100644
> index 000000000000..b7fe664bb87d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4170.yaml
> @@ -0,0 +1,558 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/adc/adi,ad4170.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices AD4170 and similar Analog to Digital Converters
> +
> +maintainers:
> +  - Marcelo Schmitt <marcelo.schmitt@analog.com>
> +
> +description: |
> +  Analog Devices AD4170 series of Sigma-delta Analog to Digital Converters.
> +  Specifications can be found at:
> +    https://www.analog.com/media/en/technical-documentation/data-sheets/ad4170-4.pdf
> +    https://www.analog.com/media/en/technical-documentation/data-sheets/ad4190-4.pdf
> +    https://www.analog.com/media/en/technical-documentation/data-sheets/ad4195-4.pdf
> +
> +$ref: /schemas/spi/spi-peripheral-props.yaml#
> +
> +$defs:
> +  reference-buffer:
> +    description: |
> +      Enable precharge buffer, full buffer, or skip reference buffering of
> +      the positive/negative voltage reference. Because the output impedance
> +      of the source driving the voltage reference inputs may be dynamic,
> +      resistive/capacitive combinations of those inputs can cause DC gain
> +      errors if the reference inputs go unbuffered into the ADC. Enable
> +      reference buffering if the provided reference source has dynamic high
> +      impedance output. Note the absolute voltage allowed on REFINn+ and REFINn-
> +      inputs is from AVSS - 50 mV to AVDD + 50 mV when the reference buffers are
> +      disabled but narrows to AVSS to AVDD when reference buffering is enabled
> +      or in precharge mode.

> The valid options for this property are:
> +      0: Reference precharge buffer.
> +      1: Full reference buffering.
> +      2: Bypass reference buffers (buffering disabled).

You forgot to remove this text. With that gone, I think this is
Acked-by: Conor Dooley <conor.dooley@microchip.com>
and that's explicitly an ack not an r-b cos I would like to see the lads
being happy with what you've done.