[PATCH 3/3] arm64: dts: ti: k3-am62*: Move eMMC pinmux to top level board file

[Judith Mendez <jm@ti.com>]

This moves pinmux child nodes for sdhci0 node from k3-am62x-sk-common
to each top level board file. This is needed since we require internal
pullups for AM62x SK and not for AM62 LP SK since it has external
pullups on DATA 1-7.

Internal pulls are required for AM62 SK as per JESD84 spec
recommendation to prevent unconnected lines floating.

Signed-off-by: Judith Mendez <jm@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts      | 25 +++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-am625-sk.dts        | 25 +++++++++++++++++++
 .../arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 24 ------------------
 3 files changed, 50 insertions(+), 24 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
index aafdb90c0eb7..973b145bb244 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
@@ -74,6 +74,22 @@ vddshv_sdio: regulator-4 {
 };
 
 &main_pmx0 {
+	main_mmc0_pins_default: main-mmc0-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (V3) MMC0_CMD */
+			AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (Y1) MMC0_CLK */
+			AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (V2) MMC0_DAT0 */
+			AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (V1) MMC0_DAT1 */
+			AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (W2) MMC0_DAT2 */
+			AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (W1) MMC0_DAT3 */
+			AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (Y2) MMC0_DAT4 */
+			AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (W3) MMC0_DAT5 */
+			AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (W4) MMC0_DAT6 */
+			AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (V4) MMC0_DAT7 */
+		>;
+	};
+
 	vddshv_sdio_pins_default: vddshv-sdio-default-pins {
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO0_31 */
@@ -144,6 +160,15 @@ exp2: gpio@23 {
 	};
 };
 
+&sdhci0 {
+	bootph-all;
+	status = "okay";
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc0_pins_default>;
+	disable-wp;
+};
+
 &sdhci1 {
 	vmmc-supply = <&vdd_mmc1>;
 	vqmmc-supply = <&vddshv_sdio>;
diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
index 2fbfa3719345..4fc018174470 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
@@ -106,6 +106,22 @@ vcc_1v8: regulator-5 {
 };
 
 &main_pmx0 {
+	main_mmc0_pins_default: main-mmc0-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
+			AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
+			AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */
+			AM62X_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AA1) MMC0_DAT1 */
+			AM62X_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (AA3) MMC0_DAT2 */
+			AM62X_IOPAD(0x208, PIN_INPUT_PULLUP, 0) /* (Y4) MMC0_DAT3 */
+			AM62X_IOPAD(0x204, PIN_INPUT_PULLUP, 0) /* (AB2) MMC0_DAT4 */
+			AM62X_IOPAD(0x200, PIN_INPUT_PULLUP, 0) /* (AC1) MMC0_DAT5 */
+			AM62X_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (AD2) MMC0_DAT6 */
+			AM62X_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AC2) MMC0_DAT7 */
+		>;
+	};
+
 	main_rgmii2_pins_default: main-rgmii2-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
@@ -195,6 +211,15 @@ exp1: gpio@22 {
 	};
 };
 
+&sdhci0 {
+	bootph-all;
+	status = "okay";
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc0_pins_default>;
+	disable-wp;
+};
+
 &sdhci1 {
 	vmmc-supply = <&vdd_mmc1>;
 	vqmmc-supply = <&vdd_sd_dv>;
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
index ee8337bfbbfd..13e1d36123d5 100644
--- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
@@ -203,22 +203,6 @@ AM62X_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24/H19) GPMC0_CSn3.I2C2_SDA */
 		>;
 	};
 
-	main_mmc0_pins_default: main-mmc0-default-pins {
-		bootph-all;
-		pinctrl-single,pins = <
-			AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3/V3) MMC0_CMD */
-			AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1/Y1) MMC0_CLK */
-			AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2/V2) MMC0_DAT0 */
-			AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (AA1/V1) MMC0_DAT1 */
-			AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (AA3/W2) MMC0_DAT2 */
-			AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (Y4/W1) MMC0_DAT3 */
-			AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (AB2/Y2) MMC0_DAT4 */
-			AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (AC1/W3) MMC0_DAT5 */
-			AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (AD2/W4) MMC0_DAT6 */
-			AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (AC2/V4) MMC0_DAT7 */
-		>;
-	};
-
 	main_mmc1_pins_default: main-mmc1-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
@@ -457,14 +441,6 @@ &main_i2c2 {
 	clock-frequency = <400000>;
 };
 
-&sdhci0 {
-	bootph-all;
-	status = "okay";
-	non-removable;
-	pinctrl-names = "default";
-	pinctrl-0 = <&main_mmc0_pins_default>;
-};
-
 &sdhci1 {
 	/* SD/MMC */
 	bootph-all;
-- 
2.49.0