[PATCH v2 3/5] arm64: dts: allwinner: a523: Move rgmii0 pins to correct location

[Chen-Yu Tsai <wens@kernel.org>]

From: Chen-Yu Tsai <wens@csie.org>

Nodes are supposed to be sorted by address, or if no addresses
apply, by node name. The rgmii0 pins are out of order, possibly
due to multiple patches adding pin mux settings conflicting.

Move the rgmii0 pins to the correct location.

Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 .../arm64/boot/dts/allwinner/sun55i-a523.dtsi | 20 +++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
index 458d7ecedacd..30613a0b1124 100644
--- a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
@@ -126,16 +126,6 @@ pio: pinctrl@2000000 {
 			interrupt-controller;
 			#interrupt-cells = <3>;
 
-			rgmii0_pins: rgmii0-pins {
-				pins = "PH0", "PH1", "PH2", "PH3", "PH4",
-				       "PH5", "PH6", "PH7", "PH9", "PH10",
-				       "PH14", "PH15", "PH16", "PH17", "PH18";
-				allwinner,pinmux = <5>;
-				function = "emac0";
-				drive-strength = <40>;
-				bias-disable;
-			};
-
 			mmc0_pins: mmc0-pins {
 				pins = "PF0" ,"PF1", "PF2", "PF3", "PF4", "PF5";
 				allwinner,pinmux = <2>;
@@ -163,6 +153,16 @@ mmc2_pins: mmc2-pins {
 				bias-pull-up;
 			};
 
+			rgmii0_pins: rgmii0-pins {
+				pins = "PH0", "PH1", "PH2", "PH3", "PH4",
+				       "PH5", "PH6", "PH7", "PH9", "PH10",
+				       "PH14", "PH15", "PH16", "PH17", "PH18";
+				allwinner,pinmux = <5>;
+				function = "emac0";
+				drive-strength = <40>;
+				bias-disable;
+			};
+
 			uart0_pb_pins: uart0-pb-pins {
 				pins = "PB9", "PB10";
 				allwinner,pinmux = <2>;
-- 
2.39.5