From: Jai Luthra <jai.luthra@ideasonboard.com>
To: Mauro Carvalho Chehab <mchehab@kernel.org>,
Hans Verkuil <hverkuil@xs4all.nl>,
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>
Cc: Devarsh Thakkar <devarsht@ti.com>,
Rishikesh Donadkar <r-donadkar@ti.com>,
Vaishnav Achath <vaishnav.a@ti.com>,
Changhuang Liang <changhuang.liang@starfivetech.com>,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
Jai Luthra <jai.luthra@ideasonboard.com>,
stable@vger.kernel.org,
Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Subject: [PATCH v3 0/6] media: ti, cdns: Multiple pixel support and misc fixes
Date: Thu, 26 Jun 2025 18:06:05 -0700 [thread overview]
Message-ID: <20250626-probe_fixes-v3-0-83e735ae466e@ideasonboard.com> (raw)
Hi,
The first four patches in this series are miscellaneous fixes and
improvements in the Cadence and TI CSI-RX drivers around probing, fwnode
and link creation.
The last two patches add support for transmitting multiple pixels per
clock on the internal bus between Cadence CSI-RX bridge and TI CSI-RX
wrapper. As this internal bus is 32-bit wide, the maximum number of
pixels that can be transmitted per cycle depend upon the format's bit
width. Secondly, the downstream element must support unpacking of
multiple pixels.
Thus we export a module function that can be used by the downstream
driver to negotiate the pixels per cycle on the output pixel stream of
the Cadence bridge.
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
---
Changes in v3:
- Move cdns-csi2rx header to include/media
- Export symbol from cdns-csi2rx.c to be used only through
the j721e-csi2rx.c module namespace
- Other minor fixes suggested by Sakari
- Add Abhilash's T-by tags
- Link to v2: https://lore.kernel.org/r/20250410-probe_fixes-v2-0-801bc6eebdea@ideasonboard.com
Changes in v2:
- Rebase on v6.15-rc1
- Fix lkp warnings in PATCH 5/6 missing header for FIELD_PREP
- Add R-By tags from Devarsh and Changhuang
- Link to v1: https://lore.kernel.org/r/20250324-probe_fixes-v1-0-5cd5b9e1cfac@ideasonboard.com
---
Jai Luthra (6):
media: ti: j721e-csi2rx: Use devm_of_platform_populate
media: ti: j721e-csi2rx: Use fwnode_get_named_child_node
media: ti: j721e-csi2rx: Fix source subdev link creation
media: cadence: csi2rx: Implement get_fwnode_pad op
media: cadence: cdns-csi2rx: Support multiple pixels per clock cycle
media: ti: j721e-csi2rx: Support multiple pixels per clock
MAINTAINERS | 1 +
drivers/media/platform/cadence/cdns-csi2rx.c | 74 ++++++++++++++++------
drivers/media/platform/ti/Kconfig | 3 +-
.../media/platform/ti/j721e-csi2rx/j721e-csi2rx.c | 65 ++++++++++++++-----
include/media/cadence/cdns-csi2rx.h | 19 ++++++
5 files changed, 127 insertions(+), 35 deletions(-)
---
base-commit: 19272b37aa4f83ca52bdf9c16d5d81bdd1354494
change-id: 20250314-probe_fixes-7e0ec33c7fee
Best regards,
--
Jai Luthra <jai.luthra@ideasonboard.com>
next reply other threads:[~2025-06-27 1:06 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-27 1:06 Jai Luthra [this message]
2025-06-27 1:06 ` [PATCH v3 1/6] media: ti: j721e-csi2rx: Use devm_of_platform_populate Jai Luthra
2025-06-27 1:06 ` [PATCH v3 2/6] media: ti: j721e-csi2rx: Use fwnode_get_named_child_node Jai Luthra
2025-06-27 1:06 ` [PATCH v3 3/6] media: ti: j721e-csi2rx: Fix source subdev link creation Jai Luthra
2025-06-27 1:06 ` [PATCH v3 4/6] media: cadence: csi2rx: Implement get_fwnode_pad op Jai Luthra
2025-06-27 1:06 ` [PATCH v3 5/6] media: cadence: cdns-csi2rx: Support multiple pixels per clock cycle Jai Luthra
2025-07-01 3:59 ` kernel test robot
2025-06-27 1:06 ` [PATCH v3 6/6] media: ti: j721e-csi2rx: Support multiple pixels per clock Jai Luthra
2025-08-12 6:19 ` [PATCH v3 0/6] media: ti, cdns: Multiple pixel support and misc fixes Rishikesh Donadkar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250626-probe_fixes-v3-0-83e735ae466e@ideasonboard.com \
--to=jai.luthra@ideasonboard.com \
--cc=changhuang.liang@starfivetech.com \
--cc=devarsht@ti.com \
--cc=hverkuil@xs4all.nl \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=mripard@kernel.org \
--cc=r-donadkar@ti.com \
--cc=sakari.ailus@linux.intel.com \
--cc=stable@vger.kernel.org \
--cc=tomi.valkeinen@ideasonboard.com \
--cc=vaishnav.a@ti.com \
--cc=y-abhilashchandra@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®