[PATCH net-next v3 0/3] net: phy: bcm54811: Fix the PHY initialization

["Kamil Horák - 2N" <kamilh@axis.com>]

From: "Kamil Horák (2N)" <kamilh@axis.com>

PATCH 1 - Add MII-Lite PHY interface mode as defined by Broadcom for
   their two-wire PHYs. It can be used with most Ethernet controllers
   under certain limitations (no half-duplex link modes etc.).

PATCH 2 - Add MII-Lite PHY interface type

PATCH 3 - Fix the BCM54811 PHY initialization so that it conforms
   to the datasheet regarding a reserved bit in the LRE Control
   register, which must be written to zero after every device reset.

Kamil Horák (2N) (3):
  net: phy: MII-Lite PHY interface mode
  dt-bindings: ethernet-phy: add MII-Lite phy interface type
  net: phy: bcm54811: Fix the PHY initialization

 .../bindings/net/ethernet-controller.yaml     |  1 +
 drivers/net/phy/broadcom.c                    | 30 ++++++++++++++++---
 drivers/net/phy/phy-core.c                    |  1 +
 drivers/net/phy/phy_caps.c                    |  4 +++
 drivers/net/phy/phylink.c                     |  1 +
 include/linux/brcmphy.h                       |  7 +++++
 include/linux/phy.h                           |  4 +++
 7 files changed, 44 insertions(+), 4 deletions(-)

-- 
2.39.5