[PATCH] dt-bindings: iio: pressure: invensense,icp101xx: add binding

[Rodrigo Gobbi <rodrigo.gobbi.7@gmail.com>]

There is no txt file for it, add yaml for invensense,icp101xx family
which is already used in the driver.

Signed-off-by: Rodrigo Gobbi <rodrigo.gobbi.7@gmail.com>
---
Very simple yaml for a i2c device with psu. The pin out for the rest of
the family (the other PNs) doesn`t change anything here, since the diff
were RESV pins (unused).

This yaml file falls in the same `category` as others that I`ve submitted, the
driver author, which might be still interested at this hardware, is no long contributing
(at least for what I`ve looked). Also, it`s email is still "at invensense", not "at tdk", either
way I`ll ping him here due the mention at the "maintainers" field:

Dear @Jean-Baptiste Maneyrol, I`ve noticed that since the driver was added,
there was no binding doc for it and this is what this patch is addressing.
In this case, a maintainer ref is required inside the .yaml file and I would
like to ask if I can add you in this case.
I would appreciate your comment or suggestion over this topic.

Tks all and regards.
---
 .../iio/pressure/invensense,icp101xx.yaml     | 45 +++++++++++++++++++
 1 file changed, 45 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/pressure/invensense,icp101xx.yaml

diff --git a/Documentation/devicetree/bindings/iio/pressure/invensense,icp101xx.yaml b/Documentation/devicetree/bindings/iio/pressure/invensense,icp101xx.yaml
new file mode 100644
index 000000000000..439f8aaafbd2
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/invensense,icp101xx.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/invensense,icp101xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: InvenSense ICP-101xx Barometric Pressure Sensors
+
+maintainers:
+  - Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
+
+description: |
+  Support for ICP-101xx family: ICP-10100, ICP-10101, ICP-10110, ICP-10111.
+  Those devices uses a simple I2C communication bus, measuring the pressure
+  in a ultra-low noise at the lowest power.
+  Datasheet: https://product.tdk.com/system/files/dam/doc/product/sensor/pressure/capacitive-pressure/data_sheet/ds-000186-icp-101xx.pdf
+
+properties:
+  compatible:
+    const: invensense,icp10100
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pressure@63 {
+            compatible = "invensense,icp10100";
+            reg = <0x63>;
+            vdd-supply = <&vdd_1v8>;
+        };
+    };
+...
-- 
2.49.0