From: Hiago De Franco <hiagofranco@gmail.com>
To: Mathieu Poirier <mathieu.poirier@linaro.org>,
Ulf Hansson <ulf.hansson@linaro.org>,
linux-pm@vger.kernel.org, linux-remoteproc@vger.kernel.org
Cc: Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Bjorn Andersson <andersson@kernel.org>,
Hiago De Franco <hiago.franco@toradex.com>,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Peng Fan <peng.fan@oss.nxp.com>,
daniel.baluta@nxp.com, iuliana.prodan@oss.nxp.com,
"Rafael J . Wysocki" <rafael@kernel.org>
Subject: [PATCH v7 0/3] remoteproc: imx_rproc: allow attaching to running core kicked by the bootloader
Date: Sun, 29 Jun 2025 14:25:09 -0300 [thread overview]
Message-ID: <20250629172512.14857-1-hiagofranco@gmail.com> (raw)
From: Hiago De Franco <hiago.franco@toradex.com>
This patch series depends on Ulf's patches that are currently under
review, "pmdomain: Add generic ->sync_state() support to genpd" [1].
Without them, this series is not going to work.
For the i.MX8X and i.MX8 family SoCs, currently when the remotecore is
started by the bootloader and the M core and A core are in the same
partition, the driver is not capable to detect the remote core and
report the correct state of it.
This patch series implement a new function, dev_pm_genpd_is_on(), which
returns the power status of a given power domain (M core power domains
IMX_SC_R_M4_0_PID0 and IMX_SC_R_M4_0_MU_1A in this case). If it is
already powered on, the driver will attach to it.
Finally, the imx_rproc_clk_enable() function was also changed to make it
return before dev_clk_get() is called, as it currently generates an SCU
fault reset if the remote core is already running and the kernel tries
to enable the clock again. These changes are a follow up from a v1 sent
to imx_rproc [2] and from a reported regression [3].
[1] https://lore.kernel.org/all/20250523134025.75130-1-ulf.hansson@linaro.org/
[2] https://lore.kernel.org/lkml/20250423155131.101473-1-hiagofranco@gmail.com/
[3] https://lore.kernel.org/lkml/20250404141713.ac2ntcsjsf7epdfa@hiago-nb/
v7:
- Added Peng reviewed-by.
v6:
- https://lore.kernel.org/all/20250626215911.5992-1-hiagofranco@gmail.com/
v5:
- https://lore.kernel.org/all/20250617193450.183889-1-hiagofranco@gmail.com/
v4:
- https://lore.kernel.org/lkml/20250602131906.25751-1-hiagofranco@gmail.com/
v3:
- https://lore.kernel.org/all/20250519171514.61974-1-hiagofranco@gmail.com/
v2:
- https://lore.kernel.org/lkml/20250507160056.11876-1-hiagofranco@gmail.com/
v1:
- https://lore.kernel.org/lkml/20250505154849.64889-1-hiagofranco@gmail.com/
Hiago De Franco (3):
pmdomain: core: introduce dev_pm_genpd_is_on()
remoteproc: imx_rproc: skip clock enable when M-core is managed by the
SCU
remoteproc: imx_rproc: detect and attach to pre-booted remote cores
drivers/pmdomain/core.c | 33 +++++++++++++++++++++++++++
drivers/remoteproc/imx_rproc.c | 41 ++++++++++++++++++++++++++++------
include/linux/pm_domain.h | 6 +++++
3 files changed, 73 insertions(+), 7 deletions(-)
--
2.39.5
next reply other threads:[~2025-06-29 17:25 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-29 17:25 Hiago De Franco [this message]
2025-06-29 17:25 ` [PATCH v7 1/3] pmdomain: core: introduce dev_pm_genpd_is_on() Hiago De Franco
2025-06-29 17:25 ` [PATCH v7 2/3] remoteproc: imx_rproc: skip clock enable when M-core is managed by the SCU Hiago De Franco
2025-06-29 17:25 ` [PATCH v7 3/3] remoteproc: imx_rproc: detect and attach to pre-booted remote cores Hiago De Franco
2025-07-15 15:32 ` Mathieu Poirier
2025-07-15 16:03 ` Ulf Hansson
2025-07-16 13:25 ` Hiago De Franco
2025-07-16 16:50 ` Mathieu Poirier
2025-07-16 17:23 ` Hiago De Franco
2025-07-16 18:56 ` Ulf Hansson
2025-07-16 19:50 ` Hiago De Franco
2025-07-03 16:45 ` [PATCH v7 0/3] remoteproc: imx_rproc: allow attaching to running core kicked by the bootloader Mathieu Poirier
2025-07-15 11:49 ` Ulf Hansson
2025-07-15 15:37 ` Mathieu Poirier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250629172512.14857-1-hiagofranco@gmail.com \
--to=hiagofranco@gmail.com \
--cc=andersson@kernel.org \
--cc=daniel.baluta@nxp.com \
--cc=hiago.franco@toradex.com \
--cc=imx@lists.linux.dev \
--cc=iuliana.prodan@oss.nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=peng.fan@oss.nxp.com \
--cc=rafael@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®