mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Marcos Garcia <magazo2005@gmail.com>
To: gregkh@linuxfoundation.org
Cc: philipp.g.hortmann@gmail.com, dan.carpenter@linaro.org,
	karanja99erick@gmail.com, rodrigo.gobbi.7@gmail.com,
	linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org,
	Marcos Garcia <magazo2005@gmail.com>
Subject: [PATCH staging] staging: rtl8723bs: Replace magic numbers in beacon initialization
Date: Mon, 30 Jun 2025 23:02:11 +0200	[thread overview]
Message-ID: <20250630210211.3922530-1-magazo2005@gmail.com> (raw)
In-Reply-To: <38411a98-d907-4173-a528-8d50b337de0c@suswa.mountain>

Replace hardcoded register values in rtl8723b_InitBeaconParameters()
with descriptive defines to improve code readability and maintainability:
- TBTT_PROHIBIT_DEFAULT (0x6404): Sets TBTT prohibit time to 100ms
  (bits [15:8]) with a 2ms margin (bits [7:0]).
- BCNTCFG_DEFAULT (0x660F): Configures maximum AIFS for beacon
  transmission to ensure high priority, as recommended by the designer.

Preserve original comments where they provide useful context, such as
firmware control in power-saving mode and designer notes about beacon
contention. Fix typo "contension" to "contention" in the comment.

Signed-off-by: Marcos Garcia <magazo2005@gmail.com>
---
 .../staging/rtl8723bs/hal/rtl8723b_hal_init.c | 50 +++++++++++++++----
 kernel/sched/ext.c                            |  8 ++-
 2 files changed, 46 insertions(+), 12 deletions(-)

diff --git a/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c b/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
index cc7886d75a0b..a3438280e1ab 100644
--- a/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
+++ b/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
@@ -1183,9 +1183,25 @@ void rtl8723b_read_chip_version(struct adapter *padapter)
 	ReadChipVersion8723B(padapter);
 }
 
-/* Beacon Configuration */
-#define TBTT_PROHIBIT_DEFAULT_MS	0x6404  /* 100ms interval + 4ms margin */
-#define BCNTCFG_AIFS_LARGEST		0x660F  /* Max AIFS for beacon priority */
+/*
+ * Beacon Configuration
+ *
+ * REG_TBTT_PROHIBIT: 16-bit register where:
+ *   - Bits [15:8] = TBTT prohibit time in units of 1ms
+ *   - Bits [7:0] = TBTT prohibit margin time in units of 0.5ms
+ * Default value of 0x6404 means:
+ *   - 0x64 (100) ms prohibit time
+ *   - 0x04 (4 * 0.5 = 2) ms margin time
+ */
+#define TBTT_PROHIBIT_100MS_2MS_MARGIN 0x6404
+
+/*
+ * REG_BCNTCFG: Beacon configuration register
+ * 0x660F sets AIFS to maximum value (0xF) with other default parameters
+ * This ensures beacons get highest priority (no contention window),
+ * as suggested by the original designer for test chips.
+ */
+#define BCNTCFG_MAX_AIFS 0x660F
 
 void rtl8723b_InitBeaconParameters(struct adapter *padapter)
 {
@@ -1193,19 +1209,31 @@ void rtl8723b_InitBeaconParameters(struct adapter *padapter)
 	u16 val16;
 	u8 val8 = DIS_TSF_UDT;
 
-	val16 = val8 | (val8 << 8); /* port0 and port1 */
-	val16 |= EN_BCN_FUNCTION;   /* Enable prot0 beacon function */
+	/* Configure beacon control for both port 0 and port 1 */
+	val16 = val8 | (val8 << 8);
+	val16 |= EN_BCN_FUNCTION; /* Enable beacon function for PSTDMA */
 	rtw_write16(padapter, REG_BCN_CTRL, val16);
 
-	/* Fixed: Replaced magic numbers with defines */
-	rtw_write16(padapter, REG_TBTT_PROHIBIT, TBTT_PROHIBIT_DEFAULT_MS);
+	/* Configure TBTT prohibit timer with 100ms interval + 2ms margin */
+	rtw_write16(padapter, REG_TBTT_PROHIBIT, TBTT_PROHIBIT_100MS_2MS_MARGIN);
+
+	/*
+	 * Firmware controls early interrupt timing in power save mode,
+	 * so only set REG_DRVERLYINT when not in station mode
+	 */
+	if (!check_fwstate(&padapter->mlmepriv, WIFI_STATION_STATE))
+		rtw_write8(padapter, REG_DRVERLYINT, DRIVER_EARLY_INT_TIME_8723B); /* 5ms */
 
-	if (check_fwstate(&padapter->mlmepriv, WIFI_STATION_STATE) == false)
-		rtw_write8(padapter, REG_DRVERLYINT, DRIVER_EARLY_INT_TIME_8723B);
+	/* Set beacon DMA interrupt time to 2ms */
+	rtw_write8(padapter, REG_BCNDMATIM, BCN_DMA_ATIME_INT_TIME_8723B); /* 2ms */
 
-	rtw_write8(padapter, REG_BCNDMATIM, BCN_DMA_ATIME_INT_TIME_8723B);
-	rtw_write16(padapter, REG_BCNTCFG, BCNTCFG_AIFS_LARGEST);
+	/*
+	 * Suggested by designer timchen: Set AIFS to maximum to avoid contention
+	 * before sending beacons on test chips. By tynli, 2009.11.03
+	 */
+	rtw_write16(padapter, REG_BCNTCFG, BCNTCFG_MAX_AIFS);
 
+	/* Save initial register values for reference */
 	pHalData->RegBcnCtrlVal = rtw_read8(padapter, REG_BCN_CTRL);
 	pHalData->RegTxPause = rtw_read8(padapter, REG_TXPAUSE);
 	pHalData->RegFwHwTxQCtrl = rtw_read8(padapter, REG_FWHW_TXQ_CTRL+2);
diff --git a/kernel/sched/ext.c b/kernel/sched/ext.c
index b498d867ba21..7cecc0ca700d 100644
--- a/kernel/sched/ext.c
+++ b/kernel/sched/ext.c
@@ -4258,7 +4258,13 @@ void scx_group_set_weight(struct task_group *tg, unsigned long weight)
 
 void scx_group_set_idle(struct task_group *tg, bool idle)
 {
-	/* TODO: Implement ops->cgroup_set_idle() */
+	struct sched_ext_ops *ops;
+
+	rcu_read_lock();
+	ops = rcu_dereference(ext_ops);
+	if (ops && ops->cgroup_set_idle)
+		ops->cgroup_set_idle(tg, idle);
+	rcu_read_unlock();
 }
 
 static void scx_cgroup_lock(void)
-- 
2.50.0


  reply	other threads:[~2025-06-30 21:02 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-30 17:33 [PATCH staging] staging: rtl8723bs: replace magic numbers in beacon init Marcos Garcia
2025-06-30 20:13 ` Dan Carpenter
2025-06-30 21:02   ` Marcos Garcia [this message]
2025-06-30 23:16     ` [PATCH staging] staging: rtl8723bs: Replace magic numbers in beacon initialization Dan Carpenter
2025-07-01  5:14     ` Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250630210211.3922530-1-magazo2005@gmail.com \
    --to=magazo2005@gmail.com \
    --cc=dan.carpenter@linaro.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=karanja99erick@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-staging@lists.linux.dev \
    --cc=philipp.g.hortmann@gmail.com \
    --cc=rodrigo.gobbi.7@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®