From: Akhil P Oommen <akhilpo@oss.qualcomm.com>
To: Rob Clark <robin.clark@oss.qualcomm.com>,
Sean Paul <sean@poorly.run>,
Konrad Dybcio <konradybcio@kernel.org>,
Dmitry Baryshkov <lumag@kernel.org>,
Abhinav Kumar <abhinav.kumar@linux.dev>,
Jessica Zhang <jessica.zhang@oss.qualcomm.com>,
Marijn Suijten <marijn.suijten@somainline.org>,
David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Bjorn Andersson <andersson@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
freedreno@lists.freedesktop.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org,
Akhil P Oommen <akhilpo@oss.qualcomm.com>
Subject: [PATCH v2 3/3] arm64: dts: qcom: x1e80100: Update GPU OPP table
Date: Tue, 01 Jul 2025 21:50:46 +0530 [thread overview]
Message-ID: <20250701-x1e-speedbin-b4-v2-3-a8a7e06d39fb@oss.qualcomm.com> (raw)
In-Reply-To: <20250701-x1e-speedbin-b4-v2-0-a8a7e06d39fb@oss.qualcomm.com>
Update the GPU OPP table with new opp levels along with the
speedbin configurations.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/x1e80100.dtsi | 57 ++++++++++++++++++++++++++++++++--
arch/arm64/boot/dts/qcom/x1p42100.dtsi | 1 +
2 files changed, 56 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
index 558d7d387d7710770244fcc901f461384dd9b0d4..ae3a84e95bbbb282edcd8e42a860618ca9873b27 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -3773,6 +3773,9 @@ gpu: gpu@3d00000 {
qcom,gmu = <&gmu>;
#cooling-cells = <2>;
+ nvmem-cells = <&gpu_speed_bin>;
+ nvmem-cell-names = "speed_bin";
+
interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "gfx-mem";
@@ -3785,11 +3788,28 @@ gpu_zap_shader: zap-shader {
gpu_opp_table: opp-table {
compatible = "operating-points-v2-adreno", "operating-points-v2";
+ opp-1500000000 {
+ opp-hz = /bits/ 64 <1500000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L5>;
+ opp-peak-kBps = <16500000>;
+ qcom,opp-acd-level = <0xa82a5ffd>;
+ opp-supported-hw = <0x03>;
+ };
+
+ opp-1375000000 {
+ opp-hz = /bits/ 64 <1375000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L4>;
+ opp-peak-kBps = <16500000>;
+ qcom,opp-acd-level = <0xa82a5ffd>;
+ opp-supported-hw = <0x03>;
+ };
+
opp-1250000000 {
opp-hz = /bits/ 64 <1250000000>;
opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L3>;
opp-peak-kBps = <16500000>;
qcom,opp-acd-level = <0xa82a5ffd>;
+ opp-supported-hw = <0x07>;
};
opp-1175000000 {
@@ -3797,13 +3817,24 @@ opp-1175000000 {
opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L2>;
opp-peak-kBps = <14398438>;
qcom,opp-acd-level = <0xa82a5ffd>;
+ opp-supported-hw = <0x07>;
};
- opp-1100000000 {
+ opp-1100000000-0 {
opp-hz = /bits/ 64 <1100000000>;
opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
opp-peak-kBps = <14398438>;
qcom,opp-acd-level = <0xa82a5ffd>;
+ opp-supported-hw = <0x07>;
+ };
+
+ /* Only applicable for SKUs which has 1100Mhz as Fmax */
+ opp-1100000000-1 {
+ opp-hz = /bits/ 64 <1100000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+ opp-peak-kBps = <16500000>;
+ qcom,opp-acd-level = <0xa82a5ffd>;
+ opp-supported-hw = <0x08>;
};
opp-1000000000 {
@@ -3811,6 +3842,7 @@ opp-1000000000 {
opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
opp-peak-kBps = <14398438>;
qcom,opp-acd-level = <0xa82b5ffd>;
+ opp-supported-hw = <0x0f>;
};
opp-925000000 {
@@ -3818,6 +3850,7 @@ opp-925000000 {
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
opp-peak-kBps = <14398438>;
qcom,opp-acd-level = <0xa82b5ffd>;
+ opp-supported-hw = <0x0f>;
};
opp-800000000 {
@@ -3825,6 +3858,7 @@ opp-800000000 {
opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
opp-peak-kBps = <12449219>;
qcom,opp-acd-level = <0xa82c5ffd>;
+ opp-supported-hw = <0x0f>;
};
opp-744000000 {
@@ -3832,13 +3866,24 @@ opp-744000000 {
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
opp-peak-kBps = <10687500>;
qcom,opp-acd-level = <0x882e5ffd>;
+ opp-supported-hw = <0x0f>;
};
- opp-687000000 {
+ opp-687000000-0 {
opp-hz = /bits/ 64 <687000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
opp-peak-kBps = <8171875>;
qcom,opp-acd-level = <0x882e5ffd>;
+ opp-supported-hw = <0x0f>;
+ };
+
+ /* Only applicable for SKUs which has 687Mhz as Fmax */
+ opp-687000000-1 {
+ opp-hz = /bits/ 64 <687000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ opp-peak-kBps = <16500000>;
+ qcom,opp-acd-level = <0x882e5ffd>;
+ opp-supported-hw = <0x10>;
};
opp-550000000 {
@@ -3846,6 +3891,7 @@ opp-550000000 {
opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
opp-peak-kBps = <6074219>;
qcom,opp-acd-level = <0xc0285ffd>;
+ opp-supported-hw = <0x1f>;
};
opp-390000000 {
@@ -3853,6 +3899,7 @@ opp-390000000 {
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
opp-peak-kBps = <3000000>;
qcom,opp-acd-level = <0xc0285ffd>;
+ opp-supported-hw = <0x1f>;
};
opp-300000000 {
@@ -3860,6 +3907,7 @@ opp-300000000 {
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
opp-peak-kBps = <2136719>;
qcom,opp-acd-level = <0xc02b5ffd>;
+ opp-supported-hw = <0x1f>;
};
};
};
@@ -8250,6 +8298,11 @@ qfprom: efuse@221c8000 {
reg = <0 0x221c8000 0 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
+
+ gpu_speed_bin: gpu-speed-bin@119 {
+ reg = <0x119 0x2>;
+ bits = <7 8>;
+ };
};
pmu@24091000 {
diff --git a/arch/arm64/boot/dts/qcom/x1p42100.dtsi b/arch/arm64/boot/dts/qcom/x1p42100.dtsi
index 090659b8bb8942cdcc46f8d4a3e7dbcc043a0f78..c64727e3c00db1e4f8f34da2701061255caa620d 100644
--- a/arch/arm64/boot/dts/qcom/x1p42100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1p42100.dtsi
@@ -18,6 +18,7 @@
/delete-node/ &cpu_pd10;
/delete-node/ &cpu_pd11;
/delete-node/ &gpu_opp_table;
+/delete-node/ &gpu_speed_bin;
/delete-node/ &pcie3_phy;
&gcc {
--
2.48.1
next prev parent reply other threads:[~2025-07-01 16:21 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-01 16:20 [PATCH v2 0/3] Support for Adreno X1-85 Speedbin along with new OPP levels Akhil P Oommen
2025-07-01 16:20 ` [PATCH v2 1/3] drm/msm/adreno: Add speedbin support for X1-85 Akhil P Oommen
2025-07-01 16:20 ` [PATCH v2 2/3] dt-bindings: power: qcom,rpmpd: add Turbo L5 corner Akhil P Oommen
2025-07-01 16:20 ` Akhil P Oommen [this message]
2025-07-07 5:24 ` [PATCH v2 0/3] Support for Adreno X1-85 Speedbin along with new OPP levels Jens Glathe
2025-09-09 16:56 ` (subset) " Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250701-x1e-speedbin-b4-v2-3-a8a7e06d39fb@oss.qualcomm.com \
--to=akhilpo@oss.qualcomm.com \
--cc=abhinav.kumar@linux.dev \
--cc=airlied@gmail.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=jessica.zhang@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lumag@kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=robh@kernel.org \
--cc=robin.clark@oss.qualcomm.com \
--cc=sean@poorly.run \
--cc=simona@ffwll.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®