From: Alexander Stein <alexander.stein@ew.tq-group.com>
To: Shawn Guo <shawnguo@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] arm64: dts: fsl-ls1046a: Add missing DMA entries for I2C & LPUART
Date: Tue, 1 Jul 2025 08:21:55 +0200 [thread overview]
Message-ID: <20250701062157.514969-2-alexander.stein@ew.tq-group.com> (raw)
In-Reply-To: <20250701062157.514969-1-alexander.stein@ew.tq-group.com>
Only i2c0 had it's DMA channels configured. Add the missing one.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
.../arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 27 +++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 0baf256b44003..d4681c491b33a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -523,6 +523,9 @@ i2c1: i2c@2190000 {
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
scl-gpios = <&gpio3 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ dmas = <&edma0 1 36>,
+ <&edma0 1 37>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -535,6 +538,9 @@ i2c2: i2c@21a0000 {
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
scl-gpios = <&gpio3 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ dmas = <&edma0 1 34>,
+ <&edma0 1 35>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -547,6 +553,9 @@ i2c3: i2c@21b0000 {
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
scl-gpios = <&gpio3 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ dmas = <&edma0 1 40>,
+ <&edma0 1 41>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -633,6 +642,9 @@ lpuart0: serial@2950000 {
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
clock-names = "ipg";
+ dmas = <&edma0 1 32>,
+ <&edma0 1 33>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -643,6 +655,9 @@ lpuart1: serial@2960000 {
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
+ dmas = <&edma0 1 30>,
+ <&edma0 1 31>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -653,6 +668,9 @@ lpuart2: serial@2970000 {
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
+ dmas = <&edma0 1 28>,
+ <&edma0 1 29>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -663,6 +681,9 @@ lpuart3: serial@2980000 {
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
+ dmas = <&edma0 1 26>,
+ <&edma0 1 27>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -673,6 +694,9 @@ lpuart4: serial@2990000 {
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
+ dmas = <&edma0 1 24>,
+ <&edma0 1 25>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -683,6 +707,9 @@ lpuart5: serial@29a0000 {
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
+ dmas = <&edma0 1 22>,
+ <&edma0 1 23>;
+ dma-names = "rx", "tx";
status = "disabled";
};
--
2.43.0
next prev parent reply other threads:[~2025-07-01 6:22 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-01 6:21 [PATCH 1/2] arm64: dts: fsl-ls1043a: " Alexander Stein
2025-07-01 6:21 ` Alexander Stein [this message]
2025-07-07 8:48 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250701062157.514969-2-alexander.stein@ew.tq-group.com \
--to=alexander.stein@ew.tq-group.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®