From: Will Whang <will@willwhang.com>
To: Will Whang <will@willwhang.com>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-media@vger.kernel.org (open list:SONY IMX585 SENSOR DRIVER),
linux-kernel@vger.kernel.org (open list),
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS)
Subject: [PATCH v1 1/4] dt-bindings: media: Add Sony IMX585 CMOS image sensor
Date: Wed, 2 Jul 2025 07:38:33 +0100 [thread overview]
Message-ID: <20250702063836.3984-2-will@willwhang.com> (raw)
In-Reply-To: <20250702063836.3984-1-will@willwhang.com>
Document the devicetree binding for the Sony IMX585. The schema
covers the CSI-2 data-lanes, the optional 'mono-mode' flag,
and the internal-sync properties used by the driver.
Signed-off-by: Will Whang <will@willwhang.com>
---
.../bindings/media/i2c/sony,imx585.yaml | 120 ++++++++++++++++++
MAINTAINERS | 8 ++
2 files changed, 128 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx585.yaml
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx585.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx585.yaml
new file mode 100644
index 000000000..d050d1642
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx585.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2024 Ideas on Board Oy
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx585.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX585 Sensor
+
+maintainers:
+ - Will Whang <will@willwhang.com>
+
+description:
+ IMX585 sensor is a Sony CMOS sensor with 4K and FHD outputs.
+
+properties:
+ compatible:
+ const: sony,imx585
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: xclk
+
+ clock-frequency:
+ enum: [ 74250000, 37125000, 72000000, 27000000, 24000000 ]
+
+ reg:
+ maxItems: 1
+ description: I2C Address for IMX585
+
+ VANA-supply:
+ description: Analog power supply (3.3V)
+
+ VDDL-supply:
+ description: Interface power supply (1.8V)
+
+ VDIG-supply:
+ description: Digital power supply (1.1V)
+
+ reset-gpios:
+ description: Sensor reset (XCLR) GPIO
+ maxItems: 1
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ additionalProperties: false
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ anyOf:
+ - items:
+ - const: 1
+ - const: 2
+ - const: 3
+ - const: 4
+
+ sync-mode:
+ description: |
+ Select the synchronisation mode of the sensor
+ 0 – internal sync, leader (default)
+ 1 – internal sync, follower
+ 2 – external sync
+ $ref: /schemas/types.yaml#/definitions/uint8
+ enum: [ 0, 1, 2 ]
+
+ link-frequencies:
+ description: Select the MIPI-CSI2 link speed in Mhz
+ items:
+ enum: [ 297000000, 360000000, 445500000, 594000000,
+ 720000000, 891000000, 1039500000 ]
+
+ required:
+ - data-lanes
+ - link-frequencies
+
+ required:
+ - endpoint
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-frequency
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ imx585@1a {
+ compatible = "sony,imx585";
+ reg = <0x1a>;
+ clocks = <&imx585_clk>;
+ clock-frequency = <24000000>;
+
+ VANA-supply = <&camera_vadd_3v3>;
+ VDDL-supply = <&camera_vdd1_1v8>;
+ VDIG-supply = <&camera_vdd2_1v1>;
+
+ port {
+ imx585: endpoint {
+ remote-endpoint = <&cam>;
+ data-lanes = <1 2 3 4>;
+ link-frequencies = /bits/ 64 <720000000>;
+ };
+ };
+ };
+ };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index da34c7227..9cc404790 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -23150,6 +23150,14 @@ T: git git://linuxtv.org/media.git
F: Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml
F: drivers/media/i2c/imx415.c
+SONY IMX585 SENSOR DRIVER
+M: Will Whang <will@willwhang.com>
+L: linux-media@vger.kernel.org
+S: Maintained
+T: git git://linuxtv.org/media.git
+F: Documentation/devicetree/bindings/media/i2c/sony,imx585.yaml
+F: drivers/media/i2c/imx585.c
+
SONY MEMORYSTICK SUBSYSTEM
M: Maxim Levitsky <maximlevitsky@gmail.com>
M: Alex Dubov <oakad@yahoo.com>
--
2.39.5
next prev parent reply other threads:[~2025-07-02 6:38 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-02 6:38 [PATCH v1 0/4] media: Add Sony IMX585 image sensor support Will Whang
2025-07-02 6:38 ` Will Whang [this message]
2025-07-02 9:28 ` [PATCH v1 1/4] dt-bindings: media: Add Sony IMX585 CMOS image sensor Laurent Pinchart
[not found] ` <CAFoNnrxquDp_yx_HSOe00cVDMcw2G+rTZs8x8RgOD3RO=tq-XA@mail.gmail.com>
2025-07-06 19:45 ` Laurent Pinchart
2025-07-04 8:08 ` Krzysztof Kozlowski
[not found] ` <CAFoNnry_BDeH9ERiDsncdpaH-f_qKqXyyM3e=M=j5ogJidU68g@mail.gmail.com>
2025-07-06 7:30 ` Krzysztof Kozlowski
2025-07-02 6:38 ` [PATCH v1 2/4] media: uapi: Add custom IMX585 control IDs Will Whang
2025-07-02 6:38 ` [PATCH v1 3/4] media: i2c: imx585: Add Sony IMX585 image-sensor driver Will Whang
2025-07-03 17:51 ` Laurent Pinchart
2025-07-03 17:54 ` Laurent Pinchart
[not found] ` <CAFoNnrx-YpQwY6_908x=8LK1uwWw0y5zKxsv+aTsW1fxX554vg@mail.gmail.com>
2025-07-06 20:30 ` Laurent Pinchart
2025-07-02 6:38 ` [PATCH v1 4/4] media: docs: Add userspace-API guide for the IMX585 driver Will Whang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250702063836.3984-2-will@willwhang.com \
--to=will@willwhang.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=robh@kernel.org \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®