From: iuncuim <iuncuim@gmail.com>
To: Srinivas Kandagatla <srini@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Samuel Holland <samuel@sholland.org>,
Vasily Khoruzhick <anarsoul@gmail.com>,
Yangtao Li <tiny.windzz@gmail.com>,
"Rafael J . Wysocki" <rafael@kernel.org>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Zhang Rui <rui.zhang@intel.com>,
Lukasz Luba <lukasz.luba@arm.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Maxime Ripard <mripard@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org,
linux-pm@vger.kernel.org
Subject: [PATCH v2 2/8] dt-bindings: thermal: sun8i: Add A523 THS0/1 controllers
Date: Thu, 3 Jul 2025 23:11:26 +0800 [thread overview]
Message-ID: <20250703151132.2642378-3-iuncuim@gmail.com> (raw)
In-Reply-To: <20250703151132.2642378-1-iuncuim@gmail.com>
From: Mikhail Kalashnikov <iuncuim@gmail.com>
Add a binding for D1/T113s thermal sensor controller. Add dt-bindings
description of the thermal sensors in the A523 processor.
The controllers require activation of the additional frequency of the
associated gpadc controller, so a new clock property has been added.
The calibration data is split into two cells that are in different areas
of nvmem. Both controllers require access to both memory cell, so a new
property nvmem-cells has been added. To maintain backward compatibility,
the name of the old cell remains the same and the new nvmem-cell-names is
called calibration-second-part
Signed-off-by: Mikhail Kalashnikov <iuncuim@gmail.com>
---
.../thermal/allwinner,sun8i-a83t-ths.yaml | 49 +++++++++++++++++--
1 file changed, 46 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
index 3e61689f6..80657435a 100644
--- a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
+++ b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
@@ -24,18 +24,22 @@ properties:
- allwinner,sun50i-h5-ths
- allwinner,sun50i-h6-ths
- allwinner,sun50i-h616-ths
+ - allwinner,sun55i-a523-ths0
+ - allwinner,sun55i-a523-ths1
clocks:
minItems: 1
items:
- description: Bus Clock
- description: Module Clock
+ - description: GPADC Clock
clock-names:
minItems: 1
items:
- const: bus
- const: mod
+ - const: gpadc
reg:
maxItems: 1
@@ -47,11 +51,16 @@ properties:
maxItems: 1
nvmem-cells:
- maxItems: 1
- description: Calibration data for thermal sensors
+ minItems: 1
+ items:
+ - description: Calibration data for thermal sensors
+ - description: Additional cell in case of separate calibration data
nvmem-cell-names:
- const: calibration
+ minItems: 1
+ items:
+ - const: calibration
+ - const: calibration-second-part
allwinner,sram:
maxItems: 1
@@ -107,6 +116,7 @@ allOf:
enum:
- allwinner,sun8i-h3-ths
- allwinner,sun20i-d1-ths
+ - allwinner,sun55i-a523-ths0
then:
properties:
@@ -132,6 +142,26 @@ allOf:
- clock-names
- resets
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun55i-a523-ths0
+ - allwinner,sun55i-a523-ths1
+ then:
+ properties:
+ clocks:
+ minItems: 2
+ clock-names:
+ items:
+ - const: bus
+ - const: gpadc
+ nvmem-cells:
+ minItems: 2
+ nvmem-cell-names:
+ minItems: 2
+
required:
- compatible
- reg
@@ -176,4 +206,17 @@ examples:
#thermal-sensor-cells = <1>;
};
+ - |
+ thermal-sensor@2009400 {
+ compatible = "allwinner,sun55i-a523-ths1";
+ reg = <0x02009400 0x400>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_GPADC1>;
+ clock-names = "bus", "gpadc";
+ resets = <&ccu RST_BUS_THS>;
+ nvmem-cells = <&ths_calibration0>, <&ths_calibration1>;
+ nvmem-cell-names = "calibration",
+ "calibration-second-part";
+ #thermal-sensor-cells = <1>;
+ };
...
--
2.49.0
next prev parent reply other threads:[~2025-07-03 15:12 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-03 15:11 [PATCH v2 0/8] Allwinner: A523: add support for " iuncuim
2025-07-03 15:11 ` [PATCH v2 1/8] dt-bindings: nvmem: SID: Add binding for A523 SID controller iuncuim
2025-07-08 17:06 ` Rob Herring (Arm)
2025-07-03 15:11 ` iuncuim [this message]
2025-07-08 21:31 ` [PATCH v2 2/8] dt-bindings: thermal: sun8i: Add A523 THS0/1 controllers Rob Herring
2025-07-03 15:11 ` [PATCH v2 3/8] thermal/drivers/sun8i: add gpadc clock iuncuim
2025-07-12 8:25 ` Chen-Yu Tsai
2025-07-03 15:11 ` [PATCH v2 4/8] thermal/drivers/sun8i: replace devm_reset_control_get to devm_reset_control_get_shared_deasserted iuncuim
2025-07-06 17:13 ` Chen-Yu Tsai
2025-07-03 15:11 ` [PATCH v2 5/8] thermal/drivers/sun8i: get calibration data from two nvmem cells iuncuim
2025-07-03 15:11 ` [PATCH v2 6/8] thermal/drivers/sun8i: Add support for A523 THS0/1 controllers iuncuim
2025-07-03 15:11 ` [PATCH v2 7/8] arm64: dts: allwinner: A523: Add SID controller node iuncuim
2025-07-03 15:11 ` [PATCH v2 8/8] arm64: dts: allwinner: A523: Add thermal sensors and zones iuncuim
2025-07-11 16:42 ` (subset) [PATCH v2 0/8] Allwinner: A523: add support for A523 THS0/1 controllers Srinivas Kandagatla
2025-07-12 7:57 ` Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250703151132.2642378-3-iuncuim@gmail.com \
--to=iuncuim@gmail.com \
--cc=anarsoul@gmail.com \
--cc=conor+dt@kernel.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=jernej.skrabec@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=lukasz.luba@arm.com \
--cc=mripard@kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=rafael@kernel.org \
--cc=robh@kernel.org \
--cc=rui.zhang@intel.com \
--cc=samuel@sholland.org \
--cc=srini@kernel.org \
--cc=tiny.windzz@gmail.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®