From: Xu Yang <xu.yang_2@nxp.com>
To: ezequiel@vanguardiasur.com.ar, mchehab@kernel.org,
laurent.pinchart@ideasonboard.com, hdegoede@redhat.com,
gregkh@linuxfoundation.org, xu.yang_2@nxp.com, mingo@kernel.org,
tglx@linutronix.de, andriy.shevchenko@linux.intel.com,
viro@zeniv.linux.org.uk, thomas.weissschuh@linutronix.de
Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-usb@vger.kernel.org, imx@lists.linux.dev, jun.li@nxp.com
Subject: [PATCH v5 1/3] usb: core: add dma-noncoherent buffer alloc and free API
Date: Fri, 4 Jul 2025 17:57:49 +0800 [thread overview]
Message-ID: <20250704095751.73765-2-xu.yang_2@nxp.com> (raw)
In-Reply-To: <20250704095751.73765-1-xu.yang_2@nxp.com>
This will add usb_alloc_noncoherent() and usb_free_noncoherent()
functions to support alloc and free buffer in a dma-noncoherent way.
To explicit manage the memory ownership for the kernel and device,
this will also add usb_dma_noncoherent_sync_for_cpu/device() functions
and call it at proper time. The management requires the user save
sg_table returned by usb_alloc_noncoherent() to urb->sgt.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
---
Changes in v5:
- improve if-else logic again
Changes in v4:
- improve if-else logic
Changes in v3:
- put Return section at the end of description
- correct some abbreviations
- remove usb_dma_noncoherent_sync_for_cpu() and
usb_dma_noncoherent_sync_for_device()
- do DMA sync in usb_hcd_map_urb_for_dma() and
usb_hcd_unmap_urb_for_dma()
- call flush_kernel_vmap_range() for OUT transfers
and invalidate_kernel_vmap_range() for IN transfers
---
drivers/usb/core/hcd.c | 29 ++++++++++-----
drivers/usb/core/usb.c | 80 ++++++++++++++++++++++++++++++++++++++++++
include/linux/usb.h | 11 ++++++
3 files changed, 112 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index c22de97432a0..03771bbc6c01 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1342,29 +1342,35 @@ void usb_hcd_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
if (IS_ENABLED(CONFIG_HAS_DMA) &&
- (urb->transfer_flags & URB_DMA_MAP_SG))
+ (urb->transfer_flags & URB_DMA_MAP_SG)) {
dma_unmap_sg(hcd->self.sysdev,
urb->sg,
urb->num_sgs,
dir);
- else if (IS_ENABLED(CONFIG_HAS_DMA) &&
- (urb->transfer_flags & URB_DMA_MAP_PAGE))
+ } else if (IS_ENABLED(CONFIG_HAS_DMA) &&
+ (urb->transfer_flags & URB_DMA_MAP_PAGE)) {
dma_unmap_page(hcd->self.sysdev,
urb->transfer_dma,
urb->transfer_buffer_length,
dir);
- else if (IS_ENABLED(CONFIG_HAS_DMA) &&
- (urb->transfer_flags & URB_DMA_MAP_SINGLE))
+ } else if (IS_ENABLED(CONFIG_HAS_DMA) &&
+ (urb->transfer_flags & URB_DMA_MAP_SINGLE)) {
dma_unmap_single(hcd->self.sysdev,
urb->transfer_dma,
urb->transfer_buffer_length,
dir);
- else if (urb->transfer_flags & URB_MAP_LOCAL)
+ } else if (urb->transfer_flags & URB_MAP_LOCAL) {
hcd_free_coherent(urb->dev->bus,
&urb->transfer_dma,
&urb->transfer_buffer,
urb->transfer_buffer_length,
dir);
+ } else if ((urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP) && urb->sgt) {
+ dma_sync_sgtable_for_cpu(hcd->self.sysdev, urb->sgt, dir);
+ if (dir == DMA_FROM_DEVICE)
+ invalidate_kernel_vmap_range(urb->transfer_buffer,
+ urb->transfer_buffer_length);
+ }
/* Make it safe to call this routine more than once */
urb->transfer_flags &= ~(URB_DMA_MAP_SG | URB_DMA_MAP_PAGE |
@@ -1425,8 +1431,15 @@ int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
}
dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
- if (urb->transfer_buffer_length != 0
- && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) {
+ if (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP) {
+ if (!urb->sgt)
+ return 0;
+
+ if (dir == DMA_TO_DEVICE)
+ flush_kernel_vmap_range(urb->transfer_buffer,
+ urb->transfer_buffer_length);
+ dma_sync_sgtable_for_device(hcd->self.sysdev, urb->sgt, dir);
+ } else if (urb->transfer_buffer_length != 0) {
if (hcd->localmem_pool) {
ret = hcd_alloc_coherent(
urb->dev->bus, mem_flags,
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 118fa4c93a79..fca7735fc660 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -1030,6 +1030,86 @@ void usb_free_coherent(struct usb_device *dev, size_t size, void *addr,
}
EXPORT_SYMBOL_GPL(usb_free_coherent);
+/**
+ * usb_alloc_noncoherent - allocate dma-noncoherent buffer for URB_NO_xxx_DMA_MAP
+ * @dev: device the buffer will be used with
+ * @size: requested buffer size
+ * @mem_flags: affect whether allocation may block
+ * @dma: used to return DMA address of buffer
+ * @dir: DMA transfer direction
+ * @table: used to return sg_table of allocated memory
+ *
+ * To explicit manage the memory ownership for the kernel vs the device by
+ * USB core, the user needs save sg_table to urb->sgt. Then USB core will
+ * do DMA sync for CPU and device properly.
+ *
+ * When the buffer is no longer used, free it with usb_free_noncoherent().
+ *
+ * Return: Either null (indicating no buffer could be allocated), or the
+ * cpu-space pointer to a buffer that may be used to perform DMA to the
+ * specified device. Such cpu-space buffers are returned along with the DMA
+ * address (through the pointer provided).
+ */
+void *usb_alloc_noncoherent(struct usb_device *dev, size_t size,
+ gfp_t mem_flags, dma_addr_t *dma,
+ enum dma_data_direction dir,
+ struct sg_table **table)
+{
+ struct device *dmadev;
+ struct sg_table *sgt;
+ void *buffer;
+
+ if (!dev || !dev->bus)
+ return NULL;
+
+ dmadev = bus_to_hcd(dev->bus)->self.sysdev;
+
+ sgt = dma_alloc_noncontiguous(dmadev, size, dir, mem_flags, 0);
+ if (!sgt)
+ return NULL;
+
+ buffer = dma_vmap_noncontiguous(dmadev, size, sgt);
+ if (!buffer) {
+ dma_free_noncontiguous(dmadev, size, sgt, dir);
+ return NULL;
+ }
+
+ *table = sgt;
+ *dma = sg_dma_address(sgt->sgl);
+
+ return buffer;
+}
+EXPORT_SYMBOL_GPL(usb_alloc_noncoherent);
+
+/**
+ * usb_free_noncoherent - free memory allocated with usb_alloc_noncoherent()
+ * @dev: device the buffer was used with
+ * @size: requested buffer size
+ * @addr: CPU address of buffer
+ * @dir: DMA transfer direction
+ * @table: describe the allocated and DMA mapped memory,
+ *
+ * This reclaims an I/O buffer, letting it be reused. The memory must have
+ * been allocated using usb_alloc_noncoherent(), and the parameters must match
+ * those provided in that allocation request.
+ */
+void usb_free_noncoherent(struct usb_device *dev, size_t size,
+ void *addr, enum dma_data_direction dir,
+ struct sg_table *table)
+{
+ struct device *dmadev;
+
+ if (!dev || !dev->bus)
+ return;
+ if (!addr)
+ return;
+
+ dmadev = bus_to_hcd(dev->bus)->self.sysdev;
+ dma_vunmap_noncontiguous(dmadev, addr);
+ dma_free_noncontiguous(dmadev, size, table, dir);
+}
+EXPORT_SYMBOL_GPL(usb_free_noncoherent);
+
/*
* Notifications of device and interface registration
*/
diff --git a/include/linux/usb.h b/include/linux/usb.h
index e8662843e68c..9ade441ab4c8 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -1619,6 +1619,7 @@ struct urb {
void *transfer_buffer; /* (in) associated data buffer */
dma_addr_t transfer_dma; /* (in) dma addr for transfer_buffer */
struct scatterlist *sg; /* (in) scatter gather buffer list */
+ struct sg_table *sgt; /* (in) scatter gather table for noncoherent buffer */
int num_mapped_sgs; /* (internal) mapped sg entries */
int num_sgs; /* (in) number of entries in the sg list */
u32 transfer_buffer_length; /* (in) data buffer length */
@@ -1824,6 +1825,16 @@ void *usb_alloc_coherent(struct usb_device *dev, size_t size,
void usb_free_coherent(struct usb_device *dev, size_t size,
void *addr, dma_addr_t dma);
+enum dma_data_direction;
+
+void *usb_alloc_noncoherent(struct usb_device *dev, size_t size,
+ gfp_t mem_flags, dma_addr_t *dma,
+ enum dma_data_direction dir,
+ struct sg_table **table);
+void usb_free_noncoherent(struct usb_device *dev, size_t size,
+ void *addr, enum dma_data_direction dir,
+ struct sg_table *table);
+
/*-------------------------------------------------------------------*
* SYNCHRONOUS CALL SUPPORT *
*-------------------------------------------------------------------*/
--
2.34.1
next prev parent reply other threads:[~2025-07-04 9:55 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-04 9:57 [PATCH v5 0/3] add dma noncoherent API Xu Yang
2025-07-04 9:57 ` Xu Yang [this message]
2025-07-04 13:51 ` [PATCH v5 1/3] usb: core: add dma-noncoherent buffer alloc and free API Alan Stern
2025-07-04 9:57 ` [PATCH v5 2/3] media: uvcvideo: use usb_alloc_noncoherent/usb_free_noncoherent() Xu Yang
2025-07-07 9:50 ` Hans de Goede
2025-07-04 9:57 ` [PATCH v5 3/3] media: stk1160: " Xu Yang
2025-07-07 10:00 ` Hans de Goede
2025-07-07 10:02 ` [PATCH v5 0/3] add dma noncoherent API Hans de Goede
2025-07-09 10:12 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250704095751.73765-2-xu.yang_2@nxp.com \
--to=xu.yang_2@nxp.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=ezequiel@vanguardiasur.com.ar \
--cc=gregkh@linuxfoundation.org \
--cc=hdegoede@redhat.com \
--cc=imx@lists.linux.dev \
--cc=jun.li@nxp.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=mingo@kernel.org \
--cc=tglx@linutronix.de \
--cc=thomas.weissschuh@linutronix.de \
--cc=viro@zeniv.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®