mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Yuto Ohnuki <ytohnuki@amazon.com>
To: Tony Nguyen <anthony.l.nguyen@intel.com>,
	Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S . Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	<intel-wired-lan@lists.osuosl.org>, <netdev@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <ytohnuki@amazon.com>,
	Kohei Enju <enjuk@amazon.com>
Subject: [PATCH iwl-next v1] igbvf: remove unused fields from struct igbvf_adapter
Date: Mon, 7 Jul 2025 19:01:17 +0100	[thread overview]
Message-ID: <20250707180116.44657-2-ytohnuki@amazon.com> (raw)

Remove following unused fields from struct igbvf_adapter that are never
referenced in the driver.

- blink_timer
- eeprom_wol
- fc_autoneg
- int_mode
- led_status
- mng_vlan_id
- polling_interval
- rx_dma_failed
- test_icr
- test_rx_ring
- test_tx_ring
- tx_dma_failed
- tx_fifo_head
- tx_fifo_size
- tx_head_addr

Also removed the following fields from struct igbvf_adapter since they
are never read or used after initialization by igbvf_probe() and igbvf_sw_init().

- bd_number
- rx_abs_int_delay
- tx_abs_int_delay
- rx_int_delay
- tx_int_delay

This changes simplify the igbvf driver by removing unused fields, which
improves maintenability.

Tested-by: Kohei Enju <enjuk@amazon.com>
Signed-off-by: Yuto Ohnuki <ytohnuki@amazon.com>
---
 drivers/net/ethernet/intel/igbvf/igbvf.h  | 25 -----------------------
 drivers/net/ethernet/intel/igbvf/netdev.c |  7 -------
 2 files changed, 32 deletions(-)

diff --git a/drivers/net/ethernet/intel/igbvf/igbvf.h b/drivers/net/ethernet/intel/igbvf/igbvf.h
index ca6e44245a7b..a61e8eeb4121 100644
--- a/drivers/net/ethernet/intel/igbvf/igbvf.h
+++ b/drivers/net/ethernet/intel/igbvf/igbvf.h
@@ -154,7 +154,6 @@ struct igbvf_ring {
 /* board specific private data structure */
 struct igbvf_adapter {
 	struct timer_list watchdog_timer;
-	struct timer_list blink_timer;
 
 	struct work_struct reset_task;
 	struct work_struct watchdog_task;
@@ -162,10 +161,7 @@ struct igbvf_adapter {
 	const struct igbvf_info *ei;
 
 	unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
-	u32 bd_number;
 	u32 rx_buffer_len;
-	u32 polling_interval;
-	u16 mng_vlan_id;
 	u16 link_speed;
 	u16 link_duplex;
 
@@ -183,9 +179,6 @@ struct igbvf_adapter {
 	unsigned int restart_queue;
 	u32 txd_cmd;
 
-	u32 tx_int_delay;
-	u32 tx_abs_int_delay;
-
 	unsigned int total_tx_bytes;
 	unsigned int total_tx_packets;
 	unsigned int total_rx_bytes;
@@ -193,23 +186,15 @@ struct igbvf_adapter {
 
 	/* Tx stats */
 	u32 tx_timeout_count;
-	u32 tx_fifo_head;
-	u32 tx_head_addr;
-	u32 tx_fifo_size;
-	u32 tx_dma_failed;
 
 	/* Rx */
 	struct igbvf_ring *rx_ring;
 
-	u32 rx_int_delay;
-	u32 rx_abs_int_delay;
-
 	/* Rx stats */
 	u64 hw_csum_err;
 	u64 hw_csum_good;
 	u64 rx_hdr_split;
 	u32 alloc_rx_buff_failed;
-	u32 rx_dma_failed;
 
 	unsigned int rx_ps_hdr_size;
 	u32 max_frame_size;
@@ -229,26 +214,16 @@ struct igbvf_adapter {
 	struct e1000_vf_stats stats;
 	u64 zero_base;
 
-	struct igbvf_ring test_tx_ring;
-	struct igbvf_ring test_rx_ring;
-	u32 test_icr;
-
 	u32 msg_enable;
 	struct msix_entry *msix_entries;
-	int int_mode;
 	u32 eims_enable_mask;
 	u32 eims_other;
 	u32 int_counter0;
 	u32 int_counter1;
 
-	u32 eeprom_wol;
 	u32 wol;
 	u32 pba;
 
-	bool fc_autoneg;
-
-	unsigned long led_status;
-
 	unsigned int flags;
 	unsigned long last_reset;
 };
diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c
index e55dd9345833..c5e677d07a20 100644
--- a/drivers/net/ethernet/intel/igbvf/netdev.c
+++ b/drivers/net/ethernet/intel/igbvf/netdev.c
@@ -1633,10 +1633,6 @@ static int igbvf_sw_init(struct igbvf_adapter *adapter)
 	adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
 	adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
 
-	adapter->tx_int_delay = 8;
-	adapter->tx_abs_int_delay = 32;
-	adapter->rx_int_delay = 0;
-	adapter->rx_abs_int_delay = 8;
 	adapter->requested_itr = 3;
 	adapter->current_itr = IGBVF_START_ITR;
 
@@ -2712,7 +2708,6 @@ static int igbvf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	struct igbvf_adapter *adapter;
 	struct e1000_hw *hw;
 	const struct igbvf_info *ei = igbvf_info_tbl[ent->driver_data];
-	static int cards_found;
 	int err;
 
 	err = pci_enable_device_mem(pdev);
@@ -2784,8 +2779,6 @@ static int igbvf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	netdev->watchdog_timeo = 5 * HZ;
 	strscpy(netdev->name, pci_name(pdev), sizeof(netdev->name));
 
-	adapter->bd_number = cards_found++;
-
 	netdev->hw_features = NETIF_F_SG |
 			      NETIF_F_TSO |
 			      NETIF_F_TSO6 |
-- 
2.47.1




Amazon Web Services EMEA SARL, 38 avenue John F. Kennedy, L-1855 Luxembourg, R.C.S. Luxembourg B186284

Amazon Web Services EMEA SARL, Irish Branch, One Burlington Plaza, Burlington Road, Dublin 4, Ireland, branch registration number 908705




             reply	other threads:[~2025-07-07 18:02 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-07-07 18:01 Yuto Ohnuki [this message]
2025-07-08 15:38 ` Simon Horman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250707180116.44657-2-ytohnuki@amazon.com \
    --to=ytohnuki@amazon.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=anthony.l.nguyen@intel.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=enjuk@amazon.com \
    --cc=intel-wired-lan@lists.osuosl.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=przemyslaw.kitszel@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®