[PATCH net-next v7 1/4] net: phy: MII-Lite PHY interface mode

["Kamil Horák - 2N" <kamilh@axis.com>]

Some Broadcom PHYs are capable to operate in simplified MII mode,
without TXER, RXER, CRS and COL signals as defined for the MII.
The MII-Lite mode can be used on most Ethernet controllers with full
MII interface by just leaving the input signals (RXER, CRS, COL)
inactive. The absence of COL signal makes half-duplex link modes
impossible but does not interfere with BroadR-Reach link modes on
Broadcom PHYs, because they are all full-duplex only.

Add MII-Lite interface mode, especially for Broadcom two-wire PHYs.

Signed-off-by: Kamil Horák - 2N <kamilh@axis.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
---
 Documentation/networking/phy.rst | 7 +++++++
 drivers/net/phy/phy-core.c       | 1 +
 drivers/net/phy/phy_caps.c       | 4 ++++
 drivers/net/phy/phylink.c        | 1 +
 include/linux/phy.h              | 4 ++++
 5 files changed, 17 insertions(+)

diff --git a/Documentation/networking/phy.rst b/Documentation/networking/phy.rst
index f64641417c54..7f159043ad5a 100644
--- a/Documentation/networking/phy.rst
+++ b/Documentation/networking/phy.rst
@@ -333,6 +333,13 @@ Some of the interface modes are described below:
     SerDes lane, each port having speeds of 2.5G / 1G / 100M / 10M achieved
     through symbol replication. The PCS expects the standard USXGMII code word.
 
+``PHY_INTERFACE_MODE_MIILITE``
+    Non-standard, simplified MII mode, without TXER, RXER, CRS and COL signals
+    as defined for the MII. The absence of COL signal makes half-duplex link
+    modes impossible but does not interfere with BroadR-Reach link modes on
+    Broadcom (and other two-wire Ethernet) PHYs, because they are full-duplex
+    only.
+
 Pause frames / flow control
 ===========================
 
diff --git a/drivers/net/phy/phy-core.c b/drivers/net/phy/phy-core.c
index c480bb40fa73..605ca20ae192 100644
--- a/drivers/net/phy/phy-core.c
+++ b/drivers/net/phy/phy-core.c
@@ -115,6 +115,7 @@ int phy_interface_num_ports(phy_interface_t interface)
 		return 0;
 	case PHY_INTERFACE_MODE_INTERNAL:
 	case PHY_INTERFACE_MODE_MII:
+	case PHY_INTERFACE_MODE_MIILITE:
 	case PHY_INTERFACE_MODE_GMII:
 	case PHY_INTERFACE_MODE_TBI:
 	case PHY_INTERFACE_MODE_REVMII:
diff --git a/drivers/net/phy/phy_caps.c b/drivers/net/phy/phy_caps.c
index d11ce1c7e712..2cc9ee97e867 100644
--- a/drivers/net/phy/phy_caps.c
+++ b/drivers/net/phy/phy_caps.c
@@ -316,6 +316,10 @@ unsigned long phy_caps_from_interface(phy_interface_t interface)
 		link_caps |= BIT(LINK_CAPA_100HD) | BIT(LINK_CAPA_100FD);
 		break;
 
+	case PHY_INTERFACE_MODE_MIILITE:
+		link_caps |= BIT(LINK_CAPA_10FD) | BIT(LINK_CAPA_100FD);
+		break;
+
 	case PHY_INTERFACE_MODE_TBI:
 	case PHY_INTERFACE_MODE_MOCA:
 	case PHY_INTERFACE_MODE_RTBI:
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index f5473510b762..c7f867b361dd 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -237,6 +237,7 @@ static int phylink_interface_max_speed(phy_interface_t interface)
 	case PHY_INTERFACE_MODE_SMII:
 	case PHY_INTERFACE_MODE_REVMII:
 	case PHY_INTERFACE_MODE_MII:
+	case PHY_INTERFACE_MODE_MIILITE:
 		return SPEED_100;
 
 	case PHY_INTERFACE_MODE_TBI:
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 74c1bcf64b3c..43786bb8f804 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -106,6 +106,7 @@ extern const int phy_basic_ports_array[3];
  * @PHY_INTERFACE_MODE_50GBASER: 50GBase-R - with Clause 134 FEC
  * @PHY_INTERFACE_MODE_LAUI: 50 Gigabit Attachment Unit Interface
  * @PHY_INTERFACE_MODE_100GBASEP: 100GBase-P - with Clause 134 FEC
+ * @PHY_INTERFACE_MODE_MIILITE: MII-Lite - MII without RXER TXER CRS COL
  * @PHY_INTERFACE_MODE_MAX: Book keeping
  *
  * Describes the interface between the MAC and PHY.
@@ -150,6 +151,7 @@ typedef enum {
 	PHY_INTERFACE_MODE_50GBASER,
 	PHY_INTERFACE_MODE_LAUI,
 	PHY_INTERFACE_MODE_100GBASEP,
+	PHY_INTERFACE_MODE_MIILITE,
 	PHY_INTERFACE_MODE_MAX,
 } phy_interface_t;
 
@@ -272,6 +274,8 @@ static inline const char *phy_modes(phy_interface_t interface)
 		return "laui";
 	case PHY_INTERFACE_MODE_100GBASEP:
 		return "100gbase-p";
+	case PHY_INTERFACE_MODE_MIILITE:
+		return "mii-lite";
 	default:
 		return "unknown";
 	}
-- 
2.39.5