From: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
To: herbert@gondor.apana.org.au, davem@davemloft.net,
linux-crypto@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Subject: [PATCH 2/2] crypto: engine: remove {prepare,unprepare}_crypt_hardware callbacks
Date: Fri, 11 Jul 2025 21:29:32 +0300 [thread overview]
Message-ID: <20250711182932.918257-2-ovidiu.panait.oss@gmail.com> (raw)
In-Reply-To: <20250711182932.918257-1-ovidiu.panait.oss@gmail.com>
The {prepare,unprepare}_crypt_hardware callbacks were added back in 2016
by commit 735d37b5424b ("crypto: engine - Introduce the block request
crypto engine framework"), but they were never implemented by any driver.
Remove them as they are unused.
Since the 'engine->idling' and 'was_busy' flags are no longer needed,
remove them as well.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
---
Documentation/crypto/crypto_engine.rst | 6 ------
crypto/crypto_engine.c | 30 +-------------------------
include/crypto/internal/engine.h | 11 ----------
3 files changed, 1 insertion(+), 46 deletions(-)
diff --git a/Documentation/crypto/crypto_engine.rst b/Documentation/crypto/crypto_engine.rst
index d562ea17d994..7ef850e28016 100644
--- a/Documentation/crypto/crypto_engine.rst
+++ b/Documentation/crypto/crypto_engine.rst
@@ -36,12 +36,6 @@ engine using ``crypto_engine_stop()`` and destroy the engine with
Before transferring any request, you have to fill the context enginectx by
providing functions for the following:
-* ``prepare_crypt_hardware``: Called once before any prepare functions are
- called.
-
-* ``unprepare_crypt_hardware``: Called once after all unprepare functions have
- been called.
-
* ``prepare_cipher_request``/``prepare_hash_request``: Called before each
corresponding request is performed. If some processing or other preparatory
work is required, do it here.
diff --git a/crypto/crypto_engine.c b/crypto/crypto_engine.c
index 8a2400f240d4..18e1689efe12 100644
--- a/crypto/crypto_engine.c
+++ b/crypto/crypto_engine.c
@@ -74,7 +74,6 @@ static void crypto_pump_requests(struct crypto_engine *engine,
struct crypto_engine_alg *alg;
struct crypto_engine_op *op;
unsigned long flags;
- bool was_busy = false;
int ret;
spin_lock_irqsave(&engine->queue_lock, flags);
@@ -83,12 +82,6 @@ static void crypto_pump_requests(struct crypto_engine *engine,
if (!engine->retry_support && engine->cur_req)
goto out;
- /* If another context is idling then defer */
- if (engine->idling) {
- kthread_queue_work(engine->kworker, &engine->pump_requests);
- goto out;
- }
-
/* Check if the engine queue is idle */
if (!crypto_queue_len(&engine->queue) || !engine->running) {
if (!engine->busy)
@@ -102,15 +95,6 @@ static void crypto_pump_requests(struct crypto_engine *engine,
}
engine->busy = false;
- engine->idling = true;
- spin_unlock_irqrestore(&engine->queue_lock, flags);
-
- if (engine->unprepare_crypt_hardware &&
- engine->unprepare_crypt_hardware(engine))
- dev_err(engine->dev, "failed to unprepare crypt hardware\n");
-
- spin_lock_irqsave(&engine->queue_lock, flags);
- engine->idling = false;
goto out;
}
@@ -129,22 +113,11 @@ static void crypto_pump_requests(struct crypto_engine *engine,
if (!engine->retry_support)
engine->cur_req = async_req;
- if (engine->busy)
- was_busy = true;
- else
+ if (!engine->busy)
engine->busy = true;
spin_unlock_irqrestore(&engine->queue_lock, flags);
- /* Until here we get the request need to be encrypted successfully */
- if (!was_busy && engine->prepare_crypt_hardware) {
- ret = engine->prepare_crypt_hardware(engine);
- if (ret) {
- dev_err(engine->dev, "failed to prepare crypt hardware\n");
- goto req_err_1;
- }
- }
-
alg = container_of(async_req->tfm->__crt_alg,
struct crypto_engine_alg, base);
op = &alg->op;
@@ -474,7 +447,6 @@ struct crypto_engine *crypto_engine_alloc_init_and_set(struct device *dev,
engine->rt = rt;
engine->running = false;
engine->busy = false;
- engine->idling = false;
engine->retry_support = retry_support;
engine->priv_data = dev;
diff --git a/include/crypto/internal/engine.h b/include/crypto/internal/engine.h
index 8da1a13619c9..f19ef376833f 100644
--- a/include/crypto/internal/engine.h
+++ b/include/crypto/internal/engine.h
@@ -21,7 +21,6 @@ struct device;
/*
* struct crypto_engine - crypto hardware engine
* @name: the engine name
- * @idling: the engine is entering idle state
* @busy: request pump is busy
* @running: the engine is on working
* @retry_support: indication that the hardware allows re-execution
@@ -31,12 +30,6 @@ struct device;
* @list: link with the global crypto engine list
* @queue_lock: spinlock to synchronise access to request queue
* @queue: the crypto queue of the engine
- * @prepare_crypt_hardware: a request will soon arrive from the queue
- * so the subsystem requests the driver to prepare the hardware
- * by issuing this call
- * @unprepare_crypt_hardware: there are currently no more requests on the
- * queue so the subsystem notifies the driver that it may relax the
- * hardware by issuing this call
* @kworker: kthread worker struct for request pump
* @pump_requests: work struct for scheduling work to the request pump
* @priv_data: the engine private data
@@ -44,7 +37,6 @@ struct device;
*/
struct crypto_engine {
char name[ENGINE_NAME_LEN];
- bool idling;
bool busy;
bool running;
@@ -56,9 +48,6 @@ struct crypto_engine {
struct crypto_queue queue;
struct device *dev;
- int (*prepare_crypt_hardware)(struct crypto_engine *engine);
- int (*unprepare_crypt_hardware)(struct crypto_engine *engine);
-
struct kthread_worker *kworker;
struct kthread_work pump_requests;
--
2.50.0
next prev parent reply other threads:[~2025-07-11 18:30 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-11 18:29 [PATCH 1/2] crypto: engine: remove request batching support Ovidiu Panait
2025-07-11 18:29 ` Ovidiu Panait [this message]
2025-07-15 21:38 ` Horia Geanta
2025-07-18 11:13 ` Herbert Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250711182932.918257-2-ovidiu.panait.oss@gmail.com \
--to=ovidiu.panait.oss@gmail.com \
--cc=davem@davemloft.net \
--cc=herbert@gondor.apana.org.au \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®