[PATCH v3 1/2] arm64: dts: qcom: sm8450-qrd: add pmic glink node

[Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>]

Add the pmic glink node linked with the DWC3 USB controller
switched to OTG mode and tagged with usb-role-switch.

Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/sm8450-qrd.dts | 51 ++++++++++++++++++++++++-
 1 file changed, 49 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
index 8c39fbcaad80..a5093eee3dea 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
@@ -37,6 +37,49 @@ vph_pwr: vph-pwr-regulator {
 		regulator-always-on;
 		regulator-boot-on;
 	};
+
+	pmic-glink {
+		compatible = "qcom,sm8450-pmic-glink", "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_1_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_sbu: endpoint {
+					};
+				};
+
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -461,8 +504,8 @@ &usb_1 {
 	status = "okay";
 };
 
-&usb_1_dwc3 {
-	dr_mode = "peripheral";
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
 };
 
 &usb_1_hsphy {
@@ -487,3 +530,7 @@ &usb_1_qmpphy {
 	vdda-phy-supply = <&vreg_l6b_1p2>;
 	vdda-pll-supply = <&vreg_l1b_0p91>;
 };
+
+&usb_1_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
-- 
2.34.1