From: Robert Richter <rrichter@amd.com>
To: Alison Schofield <alison.schofield@intel.com>,
Vishal Verma <vishal.l.verma@intel.com>,
Ira Weiny <ira.weiny@intel.com>,
Dan Williams <dan.j.williams@intel.com>,
Jonathan Cameron <Jonathan.Cameron@huawei.com>,
Dave Jiang <dave.jiang@intel.com>,
Davidlohr Bueso <dave@stgolabs.net>
Cc: <linux-cxl@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Gregory Price <gourry@gourry.net>,
"Fabio M. De Francesco" <fabio.m.de.francesco@linux.intel.com>,
Terry Bowman <terry.bowman@amd.com>,
Robert Richter <rrichter@amd.com>
Subject: [PATCH v1 04/20] cxl/region: Add region registration code to new function register_region()
Date: Tue, 15 Jul 2025 21:11:27 +0200 [thread overview]
Message-ID: <20250715191143.1023512-5-rrichter@amd.com> (raw)
In-Reply-To: <20250715191143.1023512-1-rrichter@amd.com>
Separate code to register a region from its creation. This splits the
region setup into a creation and registration part. This helps
grouping the code, adds a counterpart to unregister_region() and esp.
simplifies the error handling paths as there is a single exit for a
put_device() on errors.
Signed-off-by: Robert Richter <rrichter@amd.com>
---
drivers/cxl/core/region.c | 66 +++++++++++++++++++++------------------
1 file changed, 36 insertions(+), 30 deletions(-)
diff --git a/drivers/cxl/core/region.c b/drivers/cxl/core/region.c
index b968050ad3d7..8e2521c6c845 100644
--- a/drivers/cxl/core/region.c
+++ b/drivers/cxl/core/region.c
@@ -2326,6 +2326,9 @@ static void cxl_region_release(struct device *dev)
struct cxl_root_decoder *cxlrd = cxlr->cxlrd;
int id = atomic_read(&cxlrd->region_id);
+ if (cxlr->id < 0)
+ goto out;
+
/*
* Try to reuse the recently idled id rather than the cached
* next id to prevent the region id space from increasing
@@ -2468,6 +2471,7 @@ static struct cxl_region *cxl_region_alloc(struct cxl_root_decoder *cxlrd)
*/
get_device(dev->parent);
cxlr->cxlrd = cxlrd;
+ cxlr->id = -1;
device_set_pm_not_required(dev);
dev->bus = &cxl_bus_type;
@@ -2496,6 +2500,30 @@ static void unregister_region(void *_cxlr)
put_device(&cxlr->dev);
}
+static int register_region(struct cxl_region *cxlr, int id)
+{
+ struct cxl_root_decoder *cxlrd = cxlr->cxlrd;
+ struct device *dev = &cxlr->dev;
+ int rc;
+
+ rc = memregion_alloc(GFP_KERNEL);
+ if (rc < 0)
+ return rc;
+
+ if (atomic_cmpxchg(&cxlrd->region_id, id, rc) != id) {
+ memregion_free(rc);
+ return -EBUSY;
+ }
+
+ cxlr->id = id;
+
+ rc = dev_set_name(dev, "region%d", cxlr->id);
+ if (rc)
+ return rc;
+
+ return device_add(dev);
+}
+
/**
* devm_cxl_add_region - Adds a region to a decoder
* @cxlrd: root decoder
@@ -2516,40 +2544,29 @@ static struct cxl_region *devm_cxl_add_region(struct cxl_root_decoder *cxlrd,
{
struct cxl_port *port = to_cxl_port(cxlrd->cxlsd.cxld.dev.parent);
struct cxl_region *cxlr;
- struct device *dev;
int rc;
cxlr = cxl_region_alloc(cxlrd);
- if (IS_ERR(cxlr)) {
- memregion_free(id);
+ if (IS_ERR(cxlr))
return cxlr;
- }
cxlr->mode = mode;
cxlr->type = type;
- dev = &cxlr->dev;
- cxlr->id = id;
-
- rc = dev_set_name(dev, "region%d", id);
- if (rc)
- goto err;
-
- rc = device_add(dev);
- if (rc)
- goto err;
+ rc = register_region(cxlr, id);
+ if (rc) {
+ put_device(&cxlr->dev);
+ return ERR_PTR(rc);
+ }
rc = devm_add_action_or_reset(port->uport_dev, unregister_region, cxlr);
if (rc)
return ERR_PTR(rc);
dev_dbg(port->uport_dev, "%s: created %s\n",
- dev_name(&cxlrd->cxlsd.cxld.dev), dev_name(dev));
- return cxlr;
+ dev_name(cxlr->dev.parent), dev_name(&cxlr->dev));
-err:
- put_device(dev);
- return ERR_PTR(rc);
+ return cxlr;
}
static ssize_t __create_region_show(struct cxl_root_decoder *cxlrd, char *buf)
@@ -2572,8 +2589,6 @@ static ssize_t create_ram_region_show(struct device *dev,
static struct cxl_region *__create_region(struct cxl_root_decoder *cxlrd,
enum cxl_partition_mode mode, int id)
{
- int rc;
-
switch (mode) {
case CXL_PARTMODE_RAM:
case CXL_PARTMODE_PMEM:
@@ -2583,15 +2598,6 @@ static struct cxl_region *__create_region(struct cxl_root_decoder *cxlrd,
return ERR_PTR(-EINVAL);
}
- rc = memregion_alloc(GFP_KERNEL);
- if (rc < 0)
- return ERR_PTR(rc);
-
- if (atomic_cmpxchg(&cxlrd->region_id, id, rc) != id) {
- memregion_free(rc);
- return ERR_PTR(-EBUSY);
- }
-
return devm_cxl_add_region(cxlrd, id, mode, CXL_DECODER_HOSTONLYMEM);
}
--
2.39.5
next prev parent reply other threads:[~2025-07-15 19:12 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-15 19:11 [PATCH v1 00/20] cxl: Address translation support, part 2: Region code rework Robert Richter
2025-07-15 19:11 ` [PATCH v1 01/20] cxl/region: Move helper functions closer to their users Robert Richter
2025-07-15 19:11 ` [PATCH v1 02/20] cxl/region: Store root decoder in struct cxl_region Robert Richter
2025-07-15 19:11 ` [PATCH v1 03/20] cxl/region: Remove region id handling from cxl_region_alloc() Robert Richter
2025-07-15 19:11 ` Robert Richter [this message]
2025-07-15 19:11 ` [PATCH v1 05/20] cxl/region: Separate cxl_region_alloc() from devm_cxl_add_region() Robert Richter
2025-07-21 14:16 ` Joshua Hahn
2025-07-15 19:11 ` [PATCH v1 06/20] cxl/region: Remove dev_err() from cxl_find_root_decoder() Robert Richter
2025-07-15 19:11 ` [PATCH v1 07/20] cxl/region: Add new function cxl_endpoint_get_region() to simplify cxl_add_to_region() Robert Richter
2025-07-15 19:11 ` [PATCH v1 08/20] cxl/region: Rework memregion id allocation and move it to register_region() Robert Richter
2025-07-21 15:06 ` Joshua Hahn
2025-07-15 19:11 ` [PATCH v1 09/20] cxl/region: Change __construct_region() to use it as a tail function call Robert Richter
2025-07-15 19:11 ` [PATCH v1 10/20] cxl/region: Remove __construct_region() Robert Richter
2025-07-15 19:11 ` [PATCH v1 11/20] cxl/region: Separate auto-generated region cration code path Robert Richter
2025-07-15 19:11 ` [PATCH v1 12/20] cxl/region: Remove region creation code from construct_region() Robert Richter
2025-07-15 19:11 ` [PATCH v1 13/20] cxl/region: Move devm_cxl_add_region() out of create_region() Robert Richter
2025-07-15 19:11 ` [PATCH v1 14/20] cxl/region: Prepare removal of @cxlrd argument from create_region() Robert Richter
2025-07-15 19:11 ` [PATCH v1 15/20] cxl/region: Prepare removal of @cxled argument from construct_region() Robert Richter
2025-07-15 19:11 ` [PATCH v1 16/20] cxl/region: Introduce @hpa_range to struct cxl_region Robert Richter
2025-07-15 19:11 ` [PATCH v1 17/20] cxl/region: Remove create_region() call from construct_region() Robert Richter
2025-07-15 19:11 ` [PATCH v1 18/20] cxl/region: Determine root decoder in create_region() Robert Richter
2025-07-15 19:11 ` [PATCH v1 19/20] cxl/region: Add function to find a region's duplicate Robert Richter
2025-07-15 19:11 ` [PATCH v1 20/20] cxl/region: Early check region's interleaving configuration Robert Richter
2025-07-21 0:42 ` [PATCH v1 00/20] cxl: Address translation support, part 2: Region code rework Gregory Price
2025-07-21 20:59 ` Dave Jiang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250715191143.1023512-5-rrichter@amd.com \
--to=rrichter@amd.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=alison.schofield@intel.com \
--cc=dan.j.williams@intel.com \
--cc=dave.jiang@intel.com \
--cc=dave@stgolabs.net \
--cc=fabio.m.de.francesco@linux.intel.com \
--cc=gourry@gourry.net \
--cc=ira.weiny@intel.com \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=terry.bowman@amd.com \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®