From: Keguang Zhang via B4 Relay <devnull+keguang.zhang.gmail.com@kernel.org>
To: Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Jiaxun Yang <jiaxun.yang@flygoat.com>,
Keguang Zhang <keguang.zhang@gmail.com>
Cc: linux-mips@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v3 3/9] MIPS: dts: loongson: Add LSGZ_1B_DEV board
Date: Wed, 16 Jul 2025 19:25:12 +0800 [thread overview]
Message-ID: <20250716-loongson1-arch-v3-3-d160974d696b@gmail.com> (raw)
In-Reply-To: <20250716-loongson1-arch-v3-0-d160974d696b@gmail.com>
From: Keguang Zhang <keguang.zhang@gmail.com>
Add a device tree for LSGZ_1B_DEV board.
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
---
arch/mips/boot/dts/loongson/Makefile | 1 +
arch/mips/boot/dts/loongson/lsgz_1b_dev.dts | 162 ++++++++++++++++++++++++++++
2 files changed, 163 insertions(+)
diff --git a/arch/mips/boot/dts/loongson/Makefile b/arch/mips/boot/dts/loongson/Makefile
index 88b87c94c545..1130efa12768 100644
--- a/arch/mips/boot/dts/loongson/Makefile
+++ b/arch/mips/boot/dts/loongson/Makefile
@@ -7,3 +7,4 @@ dtb-$(CONFIG_MACH_LOONGSON64) += loongson64g_4core_ls7a.dtb
dtb-$(CONFIG_MACH_LOONGSON64) += loongson64v_4core_virtio.dtb
dtb-$(CONFIG_MACH_LOONGSON32) += ls1b-demo.dtb
+dtb-$(CONFIG_MACH_LOONGSON32) += lsgz_1b_dev.dtb
diff --git a/arch/mips/boot/dts/loongson/lsgz_1b_dev.dts b/arch/mips/boot/dts/loongson/lsgz_1b_dev.dts
new file mode 100644
index 000000000000..94ec151c0a94
--- /dev/null
+++ b/arch/mips/boot/dts/loongson/lsgz_1b_dev.dts
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2023-2025 Keguang Zhang <keguang.zhang@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "loongson1b.dtsi"
+
+/ {
+ compatible = "loongson,lsgz-1b-dev", "loongson,ls1b";
+ model = "LSGZ_1B_DEV Board";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ aliases {
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ serial0 = &uart2;
+ serial1 = &uart3;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led9 {
+ label = "led9";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led6 {
+ label = "led6";
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "nand-disk";
+ };
+ };
+
+ codec: audio-codec {
+ compatible = "realtek,alc203";
+ #sound-dai-cells = <0>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "ls1b-alc655";
+ simple-audio-card,format = "ac97";
+ simple-audio-card,widgets =
+ "Speaker", "Line Out Jack",
+ "Line", "Line In Jack",
+ "Microphone", "Microphone Jack";
+ simple-audio-card,routing =
+ "Line Out Jack", "TX",
+ "RX", "Line In Jack",
+ "RX", "Microphone Jack";
+
+ simple-audio-card,cpu {
+ sound-dai = <&ac97>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&codec>;
+ };
+ };
+};
+
+&xtal {
+ clock-frequency = <33000000>;
+};
+
+&gmac0 {
+ phy-handle = <&phy0>;
+ phy-mode = "mii";
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+
+ phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ };
+};
+
+&gmac1 {
+ phy-handle = <&phy1>;
+ phy-mode = "mii";
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy1: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ nand@0 {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "kernel";
+ reg = <0x0 0x1000000>;
+ };
+
+ partition@1000000 {
+ label = "rootfs";
+ reg = <0x1000000 0x7000000>;
+ };
+ };
+ };
+};
+
+&ac97 {
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&rtc {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
--
2.43.0
next prev parent reply other threads:[~2025-07-16 11:25 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-16 11:25 [PATCH v3 0/9] MIPS: loongson32: Convert all platform devices to DT Keguang Zhang via B4 Relay
2025-07-16 11:25 ` [PATCH v3 1/9] dt-bindings: mips: loongson: Add LS1B-DEMO and CQ-T300B Keguang Zhang via B4 Relay
2025-07-16 11:25 ` [PATCH v3 2/9] MIPS: dts: loongson: Add LS1B-DEMO board Keguang Zhang via B4 Relay
2025-07-16 11:25 ` Keguang Zhang via B4 Relay [this message]
2025-07-16 11:25 ` [PATCH v3 4/9] MIPS: dts: loongson: Add Smartloong-1C board Keguang Zhang via B4 Relay
2025-07-16 11:25 ` [PATCH v3 5/9] MIPS: dts: loongson: Add CQ-T300B board Keguang Zhang via B4 Relay
2025-07-16 11:25 ` [PATCH v3 6/9] MIPS: loongson: Add built-in DTB support Keguang Zhang via B4 Relay
2025-07-16 11:25 ` [PATCH v3 7/9] MIPS: loongson32: Switch to generic core Keguang Zhang via B4 Relay
2025-07-16 11:25 ` [PATCH v3 8/9] MIPS: Unify Loongson1 PRID_REV Keguang Zhang via B4 Relay
2025-07-16 11:25 ` [PATCH v3 9/9] MIPS: configs: Consolidate Loongson1 defconfigs Keguang Zhang via B4 Relay
2025-08-29 10:20 ` [PATCH v3 0/9] MIPS: loongson32: Convert all platform devices to DT Thomas Bogendoerfer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250716-loongson1-arch-v3-3-d160974d696b@gmail.com \
--to=devnull+keguang.zhang.gmail.com@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jiaxun.yang@flygoat.com \
--cc=keguang.zhang@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=robh@kernel.org \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®