[PATCH net-next v4 6/7] net: dsa: microchip: Setup fiber ports for KSZ8463

[<Tristram.Ha@microchip.com>]

From: Tristram Ha <tristram.ha@microchip.com>

The fiber ports in KSZ8463 cannot be detected internally, so it requires
specifying that condition in the device tree.  Like the one used in
Micrel PHY the port link can only be read and there is no write to the
PHY.  The driver programs registers to operate fiber ports correctly.

Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
---
v3
- Disable PTP function in a separate patch

 drivers/net/dsa/microchip/ksz8.c       | 16 ++++++++++++++++
 drivers/net/dsa/microchip/ksz_common.c |  3 +++
 2 files changed, 19 insertions(+)

diff --git a/drivers/net/dsa/microchip/ksz8.c b/drivers/net/dsa/microchip/ksz8.c
index 9b0ea77a081a..1fb0ebd0c50d 100644
--- a/drivers/net/dsa/microchip/ksz8.c
+++ b/drivers/net/dsa/microchip/ksz8.c
@@ -1715,6 +1715,7 @@ void ksz8_config_cpu_port(struct dsa_switch *ds)
 	const u32 *masks;
 	const u16 *regs;
 	u8 remote;
+	u8 fiber_ports = 0;
 	int i;
 
 	masks = dev->info->masks;
@@ -1745,6 +1746,21 @@ void ksz8_config_cpu_port(struct dsa_switch *ds)
 		else
 			ksz_port_cfg(dev, i, regs[P_STP_CTRL],
 				     PORT_FORCE_FLOW_CTRL, false);
+		if (p->fiber)
+			fiber_ports |= (1 << i);
+	}
+	if (ksz_is_ksz8463(dev)) {
+		/* Setup fiber ports. */
+		if (fiber_ports) {
+			fiber_ports &= 3;
+			regmap_update_bits(ksz_regmap_16(dev),
+					   reg16(dev, KSZ8463_REG_CFG_CTRL),
+					   fiber_ports << PORT_COPPER_MODE_S,
+					   0);
+			regmap_update_bits(ksz_regmap_16(dev),
+					   reg16(dev, KSZ8463_REG_DSP_CTRL_6),
+					   COPPER_RECEIVE_ADJUSTMENT, 0);
+		}
 	}
 }
 
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 0ef41f8d0066..975caf911762 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -5441,6 +5441,9 @@ int ksz_switch_register(struct ksz_device *dev)
 						&dev->ports[port_num].interface);
 
 				ksz_parse_rgmii_delay(dev, port_num, port);
+				dev->ports[port_num].fiber =
+					of_property_read_bool(port,
+							      "micrel,fiber-mode");
 			}
 			of_node_put(ports);
 		}
-- 
2.34.1