[PATCH RFC 09/10] riscv: dts: anlogic: Add Milianke MLKPAI FS01 board

[Junhui Liu <junhui.liu@pigmoral.tech>]

Add support for the Milianke MLKPAI FS01 board based on the Anlogic
DR1V90 SoC. The board features 512MB of onboard memory, with the region
after 0x1fe00000 reserved for OpenSBI.

Currently, the board can boot to a console via UART1, which is connected
to the onboard serial chip and routed to the Type-C interface.

Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
---
 arch/riscv/boot/dts/Makefile                       |  1 +
 arch/riscv/boot/dts/anlogic/Makefile               |  2 ++
 arch/riscv/boot/dts/anlogic/dr1v90-mlkpai-fs01.dts | 28 ++++++++++++++++++++++
 3 files changed, 31 insertions(+)

diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile
index 64a898da9aee33f5c10cd332ad59b945615816bf..d423b825160c7cc0248b258126867531b9687e23 100644
--- a/arch/riscv/boot/dts/Makefile
+++ b/arch/riscv/boot/dts/Makefile
@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 subdir-y += allwinner
+subdir-y += anlogic
 subdir-y += canaan
 subdir-y += microchip
 subdir-y += renesas
diff --git a/arch/riscv/boot/dts/anlogic/Makefile b/arch/riscv/boot/dts/anlogic/Makefile
new file mode 100644
index 0000000000000000000000000000000000000000..87f3b2f418cfa32012df5ae82d17262a9610f90c
--- /dev/null
+++ b/arch/riscv/boot/dts/anlogic/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_ANLOGIC) += dr1v90-mlkpai-fs01.dtb
diff --git a/arch/riscv/boot/dts/anlogic/dr1v90-mlkpai-fs01.dts b/arch/riscv/boot/dts/anlogic/dr1v90-mlkpai-fs01.dts
new file mode 100644
index 0000000000000000000000000000000000000000..6a9dca4b6e39261bdef63df5f158c89a323f1732
--- /dev/null
+++ b/arch/riscv/boot/dts/anlogic/dr1v90-mlkpai-fs01.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2025 Junhui Liu <junhui.liu@pigmoral.tech>
+ */
+
+#include "dr1v90.dtsi"
+
+/ {
+	model = "Milianke MLKPAI-FS01";
+	compatible = "milianke,mlkpai-fs01", "anlogic,dr1v90";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x1fe00000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};

-- 
2.50.1