Hi Jakub,

> On Wed, 16 Jul 2025 23:47:23 +0200 Lukasz Majewski wrote:
> > +static void mtip_ndev_cleanup(struct switch_enet_private *fep)
> > +{
> > +	struct mtip_ndev_priv *priv;
> > +	int i;
> > +
> > +	for (i = 0; i < SWITCH_EPORT_NUMBER; i++) {
> > +		if (fep->ndev[i]) {  
> 
> this just checks if netdev is NULL
> 
> > +			priv = netdev_priv(fep->ndev[i]);
> > +			cancel_work_sync(&priv->tx_timeout_work);
> > +
> > +			unregister_netdev(fep->ndev[i]);  
> 
> and if not unregisters
> 
> > +			free_netdev(fep->ndev[i]);
> > +		}
> > +	}
> > +}
> > +
> > +static int mtip_ndev_init(struct switch_enet_private *fep,
> > +			  struct platform_device *pdev)
> > +{
> > +	struct mtip_ndev_priv *priv;
> > +	int i, ret = 0;
> > +
> > +	for (i = 0; i < SWITCH_EPORT_NUMBER; i++) {
> > +		fep->ndev[i] = alloc_netdev(sizeof(struct
> > mtip_ndev_priv),  
> 
> but we assign the pointer immediatelly
> 
> > +					    fep->ndev_name[i],
> > NET_NAME_USER,
> > +					    ether_setup);
> > +		if (!fep->ndev[i]) {
> > +			ret = -ENOMEM;
> > +			break;
> > +		}
> > +
> > +		fep->ndev[i]->ethtool_ops = &mtip_ethtool_ops;
> > +		fep->ndev[i]->netdev_ops = &mtip_netdev_ops;
> > +		SET_NETDEV_DEV(fep->ndev[i], &pdev->dev);
> > +
> > +		priv = netdev_priv(fep->ndev[i]);
> > +		priv->dev = fep->ndev[i];
> > +		priv->fep = fep;
> > +		priv->portnum = i + 1;
> > +		fep->ndev[i]->irq = fep->irq;
> > +
> > +		mtip_setup_mac(fep->ndev[i]);
> > +
> > +		ret = register_netdev(fep->ndev[i]);  
> 
> and don't clear it when register fails
> 
> > +		if (ret) {
> > +			dev_err(&fep->ndev[i]->dev,
> > +				"%s: ndev %s register err: %d\n",
> > __func__,
> > +				fep->ndev[i]->name, ret);
> > +			break;
> > +		}
> > +
> > +		dev_dbg(&fep->ndev[i]->dev, "%s: MTIP eth L2
> > switch %pM\n",
> > +			fep->ndev[i]->name,
> > fep->ndev[i]->dev_addr);
> > +	}
> > +
> > +	if (ret)
> > +		mtip_ndev_cleanup(fep);  
> 
> You're probably better off handling the unwind on error separately
> from the full cleanup function, but I guess that's subjective.

Yes, you are right - I shall add:
fep->ndev[i] = NULL;

just after free_ndev(fep->ndev[i]); in the
mtip_ndev_cleanup() function.

> 
> > +	return ret;
> > +}  
> 
> > +static int mtip_sw_probe(struct platform_device *pdev)
> > +{  
> 
> > +	ret = mtip_ndev_init(fep, pdev);
> > +	if (ret) {
> > +		dev_err(&pdev->dev, "%s: Failed to create virtual
> > ndev (%d)\n",
> > +			__func__, ret);
> > +		goto ndev_init_err;
> > +	}
> > +
> > +	ret = mtip_switch_dma_init(fep);  
> 
> > +	ret = mtip_mii_init(fep, pdev);  
> 
> Seems like we're registering the netdevs before fully initializing 
> the HW? Is it safe if user (or worse, some other kernel subsystem) 
> tries to open the netdevs before the driver finished the init?
>  

This needs to be reordered - the ndev registration shall be the last
step.

Thanks for pointing this out.

> 
> > +	if (ret) {
> > +		dev_err(&pdev->dev, "%s: Cannot init phy bus
> > (%d)!\n", __func__,
> > +			ret);
> > +		goto mii_init_err;
> > +	}
> > +	/* setup timer for learning aging function */
> > +	timer_setup(&fep->timer_mgnt, mtip_mgnt_timer, 0);
> > +	mod_timer(&fep->timer_mgnt,
> > +		  jiffies +
> > msecs_to_jiffies(LEARNING_AGING_INTERVAL)); +
> > +	return 0;
> > +
> > + mii_init_err:
> > + dma_init_err:
> > +	mtip_ndev_cleanup(fep);  
> 
> Please name the labels after the action they jump to, not the location
> where they jump from.

Ok.

> 
> > + ndev_init_err:
> > +
> > +	return ret;  


Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH, Managing Director: Johanna Denk,
Tabea Lutz HRB 165235 Munich, Office: Kirchenstr.5, D-82194
Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de