[PATCH v2 2/3] thermal: amlogic: Support C3 thermal controller driver

[Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@kernel.org>]

From: Xianwei Zhao <xianwei.zhao@amlogic.com>

Add the thermal controller driver for the C3 SoC family.

The main difference compared to other Amlogic chips lies in the
offset of the sec_ao base (referred to as u_efuse_off), which is
handled differently. Everything else remains consistent.

Signed-off-by: Liming Xue <liming.xue@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
---
 drivers/thermal/amlogic_thermal.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/thermal/amlogic_thermal.c b/drivers/thermal/amlogic_thermal.c
index 5448d772db12..d1b08119c818 100644
--- a/drivers/thermal/amlogic_thermal.c
+++ b/drivers/thermal/amlogic_thermal.c
@@ -226,6 +226,12 @@ static const struct amlogic_thermal_data amlogic_thermal_a1_cpu_param = {
 	.regmap_config = &amlogic_thermal_regmap_config_g12a,
 };
 
+static const struct amlogic_thermal_data amlogic_thermal_c3_cpu_param = {
+	.u_efuse_off = 0x108,
+	.calibration_parameters = &amlogic_thermal_g12a,
+	.regmap_config = &amlogic_thermal_regmap_config_g12a,
+};
+
 static const struct of_device_id of_amlogic_thermal_match[] = {
 	{
 		.compatible = "amlogic,g12a-ddr-thermal",
@@ -239,6 +245,10 @@ static const struct of_device_id of_amlogic_thermal_match[] = {
 		.compatible = "amlogic,a1-cpu-thermal",
 		.data = &amlogic_thermal_a1_cpu_param,
 	},
+	{
+		.compatible = "amlogic,c3-cpu-thermal",
+		.data = &amlogic_thermal_c3_cpu_param,
+	},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, of_amlogic_thermal_match);

-- 
2.37.1