[PATCH v4 1/2] dt-bindings: regulator: Add Richtek RTR5133 Support

[<jeff_chang@richtek.com>]

From: Jeff Chang <jeff_chang@richtek.com>

Add bindings for Richtek RT5133 IC Controlled PMIC

Signed-off-by: Jeff Chang <jeff_chang@richtek.com>
---

PATCH v4
1. Add commit message and also /script/checkpatch --strict to fix warning.
2. Using subject prefixes matching dt-binding subsystem.
3. Re-order patches. DT patch before driver patch.
4. Fix description of yaml.
5. Add more description for base regulator.
6. Drop regulator-compatible proeprty.
7. Add prefix for vendor property richtek,oc-shutdown-all and richtek,pgb-shutdown-all.
8. Add more description for shutdown-all property.
9. Interrupts-extended -> interrupts.
10. pio->gpio for proper defines.
11. Drop unused labels. Keep rt5133_ldo1 label for ldo7 and ldo8.

 .../bindings/regulator/richtek,rt5133.yaml    | 175 ++++++++++++++++++
 1 file changed, 175 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rt5133.yaml

diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt5133.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt5133.yaml
new file mode 100644
index 000000000000..0da725596a87
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt5133.yaml
@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rt5133.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT5133 PMIC Regulator
+
+maintainers:
+  - ShihChia Chang <jeff_chang@richtek.com>
+
+description:
+  The RT5133 is an integrated Power Management IC for portable devices, featuring
+  8 LDOs and 3 GPOs. It allows programmable output voltages, soft-start times,
+  and protections via I2C. GPO operation depends on LDO1 voltage.
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt5133
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    maxItems: 1
+
+  wakeup-source: true
+
+  interrupts:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  regulators:
+    type: object
+    additionalProperties: false
+
+    properties:
+      base:
+        type: object
+        $ref: regulator.yaml#
+        unevaluatedProperties: false
+        description:
+          Properties for base regulator which control force-off base circuit.
+          Base circuit is the power source for LDO1~LDO6. Disabling it will
+          reduce IQ for Chip.
+
+        properties:
+          richtek,oc-shutdown-all:
+            type: boolean
+            description:
+              Anyone of LDO is in OC state, shut down all channels to protect CHIP.
+              Without this property, only shut down the OC LDO channel.
+
+          richtek,pgb-shutdown-all:
+            type: boolean
+            description:
+              Anyone of LDO is in PGB state, shut down all channels to protect CHIP.
+              Without this property, only shut down the PGB LDO channel.
+
+        required:
+          - regulator-name
+
+    patternProperties:
+      "^ldo([1-6])$":
+        type: object
+        $ref: regulator.yaml#
+        unevaluatedProperties: false
+        description:
+          Properties for single LDO regulator
+
+        required:
+          - regulator-name
+
+      "^ldo([7-8])$":
+        type: object
+        $ref: regulator.yaml#
+        unevaluatedProperties: false
+        description:
+          Properties for single LDO regulator
+
+        properties:
+          rt5133-ldo1-supply:
+            description: |
+              Only for ldo7 ldo8, pvin7 and pvin8 reference design are RT5133 ldo1.
+              If not connect to ldo1 vout, this property for pvin7 and pvin8 is necessary.
+
+        required:
+          - regulator-name
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - wakeup-source
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      rt5133@18 {
+        compatible = "richtek,rt5133";
+        reg = <0x18>;
+        wakeup-source;
+        interrupts-extended = <&gpio 187 0x0>;
+        enable-gpios = <&gpio 186 0x0>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        regulators {
+          base {
+            regulator-name = "rt5133,base";
+            richtek,oc-shutdown-all;
+            richtek,pgb-shutdown-all;
+          };
+          rt5133_ldo1: ldo1 {
+            regulator-name = "rt5133-ldo1";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <3199998>;
+            regulator-active-discharge = <1>;
+          };
+          ldo2 {
+            regulator-name = "rt5133-ldo2";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <3200000>;
+            regulator-active-discharge = <1>;
+          };
+          ldo3 {
+            regulator-name = "rt5133-ldo3";
+            regulator-min-microvolt = <1700000>;
+            regulator-max-microvolt = <3000000>;
+            regulator-active-discharge = <1>;
+          };
+          ldo4 {
+            regulator-name = "rt5133-ldo4";
+            regulator-min-microvolt = <1700000>;
+            regulator-max-microvolt = <3000000>;
+            regulator-active-discharge = <1>;
+          };
+          ldo5 {
+            regulator-name = "rt5133-ldo5";
+            regulator-min-microvolt = <1700000>;
+            regulator-max-microvolt = <3000000>;
+            regulator-active-discharge = <1>;
+          };
+          ldo6 {
+            regulator-name = "rt5133-ldo6";
+            regulator-min-microvolt = <1700000>;
+            regulator-max-microvolt = <3000000>;
+            regulator-active-discharge = <1>;
+          };
+          ldo7 {
+            regulator-name = "rt5133-ldo7";
+            regulator-min-microvolt = <900000>;
+            regulator-max-microvolt = <1200000>;
+            regulator-active-discharge = <1>;
+            rt5133-ldo1-supply = <&rt5133_ldo1>;
+          };
+          ldo8 {
+            regulator-name = "rt5133-ldo8";
+            regulator-min-microvolt = <855000>;
+            regulator-max-microvolt = <1200000>;
+            regulator-active-discharge = <1>;
+            rt5133-ldo1-supply = <&rt5133_ldo1>;
+          };
+        };
+      };
+    };
--
2.43.0