mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Varadarajan Narayanan <quic_varada@quicinc.com>
To: <andersson@kernel.org>, <mturquette@baylibre.com>,
	<sboyd@kernel.org>, <robh@kernel.org>, <krzk+dt@kernel.org>,
	<conor+dt@kernel.org>, <konradybcio@kernel.org>,
	<rafael@kernel.org>, <viresh.kumar@linaro.org>,
	<ilia.lin@kernel.org>, <djakov@kernel.org>,
	<quic_srichara@quicinc.com>, <quic_mdalam@quicinc.com>,
	<linux-arm-msm@vger.kernel.org>, <linux-clk@vger.kernel.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-pm@vger.kernel.org>
Cc: Varadarajan Narayanan <quic_varada@quicinc.com>
Subject: [PATCH v2 4/4] arm64: dts: qcom: ipq5424: Enable cpufreq
Date: Wed, 23 Jul 2025 16:38:15 +0530	[thread overview]
Message-ID: <20250723110815.2865403-5-quic_varada@quicinc.com> (raw)
In-Reply-To: <20250723110815.2865403-1-quic_varada@quicinc.com>

From: Sricharan Ramabadhran <quic_srichara@quicinc.com>

Add the qfprom, cpu clocks, A53 PLL and cpu-opp-table required for
CPU clock scaling.

Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
[ Added interconnect related entries, fix dt-bindings errors ]
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
v2: Add 'interconnects' to cpu nodes
    Add 'opp-peak-kBps' to opp table
    Add '#interconnect-cells' to apss_clk
    Remove unnecessary comment
    Fix dt-binding-errors in qfprom node
---
 arch/arm64/boot/dts/qcom/ipq5424.dtsi | 65 +++++++++++++++++++++++++++
 1 file changed, 65 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq5424.dtsi b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
index 2eea8a078595..39d394f49789 100644
--- a/arch/arm64/boot/dts/qcom/ipq5424.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
@@ -7,6 +7,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,apss-ipq.h>
 #include <dt-bindings/clock/qcom,ipq5424-cmn-pll.h>
 #include <dt-bindings/clock/qcom,ipq5424-gcc.h>
 #include <dt-bindings/reset/qcom,ipq5424-gcc.h>
@@ -52,6 +53,12 @@ cpu0: cpu@0 {
 			reg = <0x0>;
 			enable-method = "psci";
 			next-level-cache = <&l2_0>;
+			clocks = <&apss_clk APSS_SILVER_CORE_CLK>,
+				 <&apss_clk L3_CORE_CLK>;
+			clock-names = "cpu", "l3_core";
+			operating-points-v2 = <&cpu_opp_table>;
+			interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>;
+
 			l2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
@@ -72,6 +79,11 @@ cpu1: cpu@100 {
 			enable-method = "psci";
 			reg = <0x100>;
 			next-level-cache = <&l2_100>;
+			clocks = <&apss_clk APSS_SILVER_CORE_CLK>,
+				 <&apss_clk L3_CORE_CLK>;
+			clock-names = "cpu", "l3_core";
+			operating-points-v2 = <&cpu_opp_table>;
+			interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>;
 
 			l2_100: l2-cache {
 				compatible = "cache";
@@ -87,6 +99,11 @@ cpu2: cpu@200 {
 			enable-method = "psci";
 			reg = <0x200>;
 			next-level-cache = <&l2_200>;
+			clocks = <&apss_clk APSS_SILVER_CORE_CLK>,
+				 <&apss_clk L3_CORE_CLK>;
+			clock-names = "cpu", "l3_core";
+			operating-points-v2 = <&cpu_opp_table>;
+			interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>;
 
 			l2_200: l2-cache {
 				compatible = "cache";
@@ -102,6 +119,11 @@ cpu3: cpu@300 {
 			enable-method = "psci";
 			reg = <0x300>;
 			next-level-cache = <&l2_300>;
+			clocks = <&apss_clk APSS_SILVER_CORE_CLK>,
+				 <&apss_clk L3_CORE_CLK>;
+			clock-names = "cpu", "l3_core";
+			operating-points-v2 = <&cpu_opp_table>;
+			interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>;
 
 			l2_300: l2-cache {
 				compatible = "cache";
@@ -119,6 +141,28 @@ scm {
 		};
 	};
 
+	cpu_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2-kryo-cpu";
+		opp-shared;
+		nvmem-cells = <&cpu_speed_bin>;
+
+		opp-1416000000 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <1>;
+			opp-supported-hw = <0x3>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <984000>;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <2>;
+			opp-supported-hw = <0x1>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1272000>;
+		};
+	};
+
 	memory@80000000 {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the size */
@@ -388,6 +432,18 @@ system-cache-controller@800000 {
 			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		qfprom@a6000 {
+			compatible = "qcom,ipq5424-qfprom", "qcom,qfprom";
+			reg = <0x0 0x000a6000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			cpu_speed_bin: cpu-speed-bin@234 {
+				reg = <0x234 0x1>;
+				bits = <0 8>;
+			};
+		};
+
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,ipq5424-tlmm";
 			reg = <0 0x01000000 0 0x300000>;
@@ -730,6 +786,15 @@ frame@f42d000 {
 			};
 		};
 
+		apss_clk: apss-clock@fa80000 {
+			compatible = "qcom,ipq5424-apss-clk";
+			reg = <0x0 0x0fa80000 0x0 0x20000>;
+			clocks = <&xo_board>, <&gcc GPLL0>;
+			clock-names = "xo", "gpll0";
+			#clock-cells = <1>;
+			#interconnect-cells = <1>;
+		};
+
 		pcie3: pcie@40000000 {
 			compatible = "qcom,pcie-ipq5424", "qcom,pcie-ipq9574";
 			reg = <0x0 0x40000000 0x0 0xf1c>,
-- 
2.34.1


  parent reply	other threads:[~2025-07-23 11:09 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-07-23 11:08 [PATCH 0/4] Enable cpufreq for IPQ5424 Varadarajan Narayanan
2025-07-23 11:08 ` [PATCH v2 1/4] dt-bindings: clock: ipq5424-apss-clk: Add ipq5424 apss clock controller Varadarajan Narayanan
2025-07-24  8:14   ` Krzysztof Kozlowski
2025-07-25  4:18     ` Varadarajan Narayanan
2025-07-23 11:08 ` [PATCH v2 2/4] clk: qcom: apss-ipq5424: " Varadarajan Narayanan
2025-07-23 13:09   ` Konrad Dybcio
2025-07-23 11:08 ` [PATCH v2 3/4] cpufreq: qcom-nvmem: Enable cpufreq for ipq5424 Varadarajan Narayanan
2025-07-23 11:08 ` Varadarajan Narayanan [this message]
2025-07-23 13:33   ` [PATCH v2 4/4] arm64: dts: qcom: ipq5424: Enable cpufreq Konrad Dybcio

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250723110815.2865403-5-quic_varada@quicinc.com \
    --to=quic_varada@quicinc.com \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=djakov@kernel.org \
    --cc=ilia.lin@kernel.org \
    --cc=konradybcio@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=quic_mdalam@quicinc.com \
    --cc=quic_srichara@quicinc.com \
    --cc=rafael@kernel.org \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®