Re: [PATCH] media: ov8865: move mode_configure out of state_configure

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

On Wed, Jul 23, 2025 at 09:40:42AM -0700, Allen Ballway wrote:
> On Wed, Jul 23, 2025 at 8:47 AM Laurent Pinchart wrote:
> > On Tue, Jul 22, 2025 at 01:35:43PM -0700, Allen Ballway wrote:
> > > ov8865_mode_configure() only needs to be called on sensor init, but it can
> > > be called multiple times from ov8865_state_configure(). Move
> > > ov8865_mode_configure() to ov8865_sensor_init().
> > >
> > > Signed-off-by: Allen Ballway <ballway@chromium.org>
> > > ---
> > >  drivers/media/i2c/ov8865.c | 15 +++++++--------
> > >  1 file changed, 7 insertions(+), 8 deletions(-)
> > >
> > > diff --git a/drivers/media/i2c/ov8865.c b/drivers/media/i2c/ov8865.c
> > > index 95ffe7536aa6aba814f4e5c3d12e7279470b2f07..1d1a1f261bf4ab5c09848402dc057e2f572504e7 100644
> > > --- a/drivers/media/i2c/ov8865.c
> > > +++ b/drivers/media/i2c/ov8865.c
> > > @@ -2304,14 +2304,6 @@ static int ov8865_state_configure(struct ov8865_sensor *sensor,
> > >       if (sensor->state.streaming)
> > >               return -EBUSY;
> > >
> > > -     /* State will be configured at first power on otherwise. */
> > > -     if (pm_runtime_enabled(sensor->dev) &&
> > > -         !pm_runtime_suspended(sensor->dev)) {
> > > -             ret = ov8865_mode_configure(sensor, mode, mbus_code);
> > > -             if (ret)
> > > -                     return ret;
> > > -     }
> > > -
> > >       ret = ov8865_state_mipi_configure(sensor, mode, mbus_code);
> > >       if (ret)
> > >               return ret;
> > > @@ -2384,6 +2376,13 @@ static int ov8865_sensor_init(struct ov8865_sensor *sensor)
> > >       }
> > >
> > >       /* Configure current mode. */
> > > +     ret = ov8865_mode_configure(sensor, sensor->state.mode,
> > > +                                  sensor->state.mbus_code);
> >
> > How about the implication on ov8865_set_fmt() that will not update the
> > link freq and pixel rate controls anymore ?
> 
> I believe those will be unaffected by this change, they are updated in
> ov8865_state_mipi_configure() which is still called from
> ov8865_set_fmt() via ov8865_state_configure().

You're right, my bad.

> > > +     if (ret) {
> > > +             dev_err(sensor->dev, "failed to configure mode\n");
> > > +             return ret;
> > > +     }
> > > +
> > >       ret = ov8865_state_configure(sensor, sensor->state.mode,
> > >                                    sensor->state.mbus_code);

Can't we drop this now ? The remaining code in ov8865_state_configure()
updates the link frequency and pixel rate controls, and sets
sensor->state.mode and sensor->state.mbus_code. The latter is a no-op
here as they're set to their current value, and the controls shouldn't
need an update in this function as it's only called from
ov8865_resume().

> > >       if (ret) {
> > >
> > > ---
> > > base-commit: 6832a9317eee280117cd695fa885b2b7a7a38daf
> > > change-id: 20250722-mode_configure-80105fbd835d

-- 
Regards,

Laurent Pinchart