[PATCH v4 2/2] arm64: dts: qcom: qcs8300-ride: Enable Display Port

[Yongxing Mou <quic_yongmou@quicinc.com>]

Enable DPTX0 along with their corresponding PHYs for
qcs8300-ride platform.

Signed-off-by: Yongxing Mou <quic_yongmou@quicinc.com>
---
 arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 42 +++++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
index 8c166ead912c589c01d2bc7d13fa1b6892f6252b..1ce4a3138eac45147eacf5fde8a7eaa79a9af9b1 100644
--- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
+++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
@@ -23,6 +23,18 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	dp0-connector {
+		compatible = "dp-connector";
+		label = "DP0";
+		type = "full-size";
+
+		port {
+			dp0_connector_in: endpoint {
+				remote-endpoint = <&mdss_dp0_out>;
+			};
+		};
+	};
+
 	regulator-usb2-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "USB2_VBUS";
@@ -308,6 +320,30 @@ &iris {
 	status = "okay";
 };
 
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp0 {
+	pinctrl-0 = <&dp_hot_plug_det>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+	remote-endpoint = <&dp0_connector_in>;
+};
+
+&mdss_dp0_phy {
+	vdda-phy-supply = <&vreg_l5a>;
+	vdda-pll-supply = <&vreg_l4a>;
+
+	status = "okay";
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -333,6 +369,12 @@ &serdes0 {
 };
 
 &tlmm {
+	dp_hot_plug_det: dp-hot-plug-det-state {
+		pins = "gpio94";
+		function = "edp0_hot";
+		bias-disable;
+	};
+
 	ethernet0_default: ethernet0-default-state {
 		ethernet0_mdc: ethernet0-mdc-pins {
 			pins = "gpio5";

-- 
2.34.1