mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Simon Horman <horms@kernel.org>
To: Jijie Shao <shaojijie@huawei.com>
Cc: davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
	pabeni@redhat.com, andrew+netdev@lunn.ch, shenjian15@huawei.com,
	liuyonglong@huawei.com, chenhao418@huawei.com,
	jonathan.cameron@huawei.com,
	shameerali.kolothum.thodi@huawei.com, salil.mehta@huawei.com,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH net 1/3] net: hibmcge: fix rtnl deadlock issue
Date: Fri, 1 Aug 2025 11:05:20 +0100	[thread overview]
Message-ID: <20250801100520.GJ8494@horms.kernel.org> (raw)
In-Reply-To: <20250731134749.4090041-2-shaojijie@huawei.com>

On Thu, Jul 31, 2025 at 09:47:47PM +0800, Jijie Shao wrote:
> Currently, the hibmcge netdev acquires the rtnl_lock in
> pci_error_handlers.reset_prepare() and releases it in
> pci_error_handlers.reset_done().
> 
> However, in the PCI framework:
> pci_reset_bus - __pci_reset_slot - pci_slot_save_and_disable_locked -
>  pci_dev_save_and_disable - err_handler->reset_prepare(dev);
> 
> In pci_slot_save_and_disable_locked():
> 	list_for_each_entry(dev, &slot->bus->devices, bus_list) {
> 		if (!dev->slot || dev->slot!= slot)
> 			continue;
> 		pci_dev_save_and_disable(dev);
> 		if (dev->subordinate)
> 			pci_bus_save_and_disable_locked(dev->subordinate);
> 	}
> 
> This will iterate through all devices under the current bus and execute
> err_handler->reset_prepare(), causing two devices of the hibmcge driver
> to sequentially request the rtnl_lock, leading to a deadlock.
> 
> Since the driver now executes netif_device_detach()
> before the reset process, it will not concurrently with
> other netdev APIs, so there is no need to hold the rtnl_lock now.
> 
> Therefore, this patch removes the rtnl_lock during the reset process and
> adjusts the position of HBG_NIC_STATE_RESETTING to ensure
> that multiple resets are not executed concurrently.
> 
> Fixes: 3f5a61f6d504f ("net: hibmcge: Add reset supported in this module")
> Signed-off-by: Jijie Shao <shaojijie@huawei.com>
> ---
>  drivers/net/ethernet/hisilicon/hibmcge/hbg_err.c | 13 ++++---------
>  1 file changed, 4 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/net/ethernet/hisilicon/hibmcge/hbg_err.c b/drivers/net/ethernet/hisilicon/hibmcge/hbg_err.c
> index 503cfbfb4a8a..94bc6f0da912 100644
> --- a/drivers/net/ethernet/hisilicon/hibmcge/hbg_err.c
> +++ b/drivers/net/ethernet/hisilicon/hibmcge/hbg_err.c
> @@ -53,9 +53,11 @@ static int hbg_reset_prepare(struct hbg_priv *priv, enum hbg_reset_type type)
>  {
>  	int ret;
>  
> -	ASSERT_RTNL();
> +	if (test_and_set_bit(HBG_NIC_STATE_RESETTING, &priv->state))
> +		return -EBUSY;
>  
>  	if (netif_running(priv->netdev)) {
> +		clear_bit(HBG_NIC_STATE_RESETTING, &priv->state);
>  		dev_warn(&priv->pdev->dev,
>  			 "failed to reset because port is up\n");
>  		return -EBUSY;
> @@ -64,7 +66,6 @@ static int hbg_reset_prepare(struct hbg_priv *priv, enum hbg_reset_type type)
>  	netif_device_detach(priv->netdev);
>  
>  	priv->reset_type = type;
> -	set_bit(HBG_NIC_STATE_RESETTING, &priv->state);
>  	clear_bit(HBG_NIC_STATE_RESET_FAIL, &priv->state);
>  	ret = hbg_hw_event_notify(priv, HBG_HW_EVENT_RESET);
>  	if (ret) {
> @@ -84,10 +85,8 @@ static int hbg_reset_done(struct hbg_priv *priv, enum hbg_reset_type type)
>  	    type != priv->reset_type)
>  		return 0;
>  
> -	ASSERT_RTNL();
> -
> -	clear_bit(HBG_NIC_STATE_RESETTING, &priv->state);
>  	ret = hbg_rebuild(priv);
> +	clear_bit(HBG_NIC_STATE_RESETTING, &priv->state);

Hi Jijie,

If I understand things correctly, then with this patch the
HBG_NIC_STATE_RESETTING bit is used to prevent concurrent execution.

Noting that a reset may be triggered via eththool, where hbg_reset() is
used as a callback, I am concerned about concurrency implications for lines
below this one.

>  	if (ret) {
>  		priv->stats.reset_fail_cnt++;
>  		set_bit(HBG_NIC_STATE_RESET_FAIL, &priv->state);
> @@ -101,12 +100,10 @@ static int hbg_reset_done(struct hbg_priv *priv, enum hbg_reset_type type)
>  	return ret;
>  }
>  
> -/* must be protected by rtnl lock */
>  int hbg_reset(struct hbg_priv *priv)
>  {
>  	int ret;
>  
> -	ASSERT_RTNL();
>  	ret = hbg_reset_prepare(priv, HBG_RESET_TYPE_FUNCTION);
>  	if (ret)
>  		return ret;
> @@ -171,7 +168,6 @@ static void hbg_pci_err_reset_prepare(struct pci_dev *pdev)
>  	struct net_device *netdev = pci_get_drvdata(pdev);
>  	struct hbg_priv *priv = netdev_priv(netdev);
>  
> -	rtnl_lock();
>  	hbg_reset_prepare(priv, HBG_RESET_TYPE_FLR);
>  }
>  
> @@ -181,7 +177,6 @@ static void hbg_pci_err_reset_done(struct pci_dev *pdev)
>  	struct hbg_priv *priv = netdev_priv(netdev);
>  
>  	hbg_reset_done(priv, HBG_RESET_TYPE_FLR);
> -	rtnl_unlock();
>  }
>  
>  static const struct pci_error_handlers hbg_pci_err_handler = {
> -- 
> 2.33.0
> 

  reply	other threads:[~2025-08-01 10:05 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-07-31 13:47 [PATCH net 0/3] There are some bugfix for hibmcge ethernet driver Jijie Shao
2025-07-31 13:47 ` [PATCH net 1/3] net: hibmcge: fix rtnl deadlock issue Jijie Shao
2025-08-01 10:05   ` Simon Horman [this message]
2025-08-01 10:44     ` Jijie Shao
2025-08-01 11:05       ` Simon Horman
2025-07-31 13:47 ` [PATCH net 2/3] net: hibmcge: fix the division by zero issue Jijie Shao
2025-08-01 10:11   ` Simon Horman
2025-08-01 10:46     ` Jijie Shao
2025-07-31 13:47 ` [PATCH net 3/3] net: hibmcge: fix the np_link_fai error reporting issue Jijie Shao
2025-08-01 10:20   ` Simon Horman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250801100520.GJ8494@horms.kernel.org \
    --to=horms@kernel.org \
    --cc=andrew+netdev@lunn.ch \
    --cc=chenhao418@huawei.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=jonathan.cameron@huawei.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=liuyonglong@huawei.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=salil.mehta@huawei.com \
    --cc=shameerali.kolothum.thodi@huawei.com \
    --cc=shaojijie@huawei.com \
    --cc=shenjian15@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®