From: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
To: gshahrouzi@gmail.com, gregkh@linuxfoundation.org,
linux-kernel@vger.kernel.org
Cc: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Subject: [PATCH] staging: axis-fifo: fix maximum TX packet length check
Date: Sat, 2 Aug 2025 23:59:43 +0300 [thread overview]
Message-ID: <20250802205943.958071-1-ovidiu.panait.oss@gmail.com> (raw)
Since commit 2ca34b508774 ("staging: axis-fifo: Correct handling of
tx_fifo_depth for size validation"), write() operations with packets
larger than 'tx_fifo_depth - 4' words are no longer rejected with -EINVAL.
Fortunately, the packets are not actually getting transmitted to hardware,
otherwise they would be raising a 'Transmit Packet Overrun Error'
interrupt, which requires a reset of the TX circuit to recover from.
Instead, the request times out inside wait_event_interruptible_timeout()
and always returns -EAGAIN, since the wake up condition can never be true
for these packets. But still, they unnecessarily block other tasks from
writing to the FIFO and the EAGAIN return code signals userspace to retry
the write() call, even though it will always fail and time out.
According to the AXI4-Stream FIFO reference manual (PG080), the maximum
valid packet length is 'tx_fifo_depth - 4' words, so attempting to send
larger packets is invalid and should not be happening in the first place:
> The maximum packet that can be transmitted is limited by the size of
> the FIFO, which is (C_TX_FIFO_DEPTH–4)*(data interface width/8) bytes.
Therefore, bring back the old behavior and outright reject packets larger
than 'tx_fifo_depth - 4' with -EINVAL. Add a comment to explain why the
check is necessary. The dev_err() message was removed to avoid cluttering
the dmesg log if an invalid packet is received from userspace.
Fixes: 2ca34b508774 ("staging: axis-fifo: Correct handling of tx_fifo_depth for size validation")
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
---
drivers/staging/axis-fifo/axis-fifo.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/axis-fifo/axis-fifo.c b/drivers/staging/axis-fifo/axis-fifo.c
index 25c0fa8c415d..0f244f80c368 100644
--- a/drivers/staging/axis-fifo/axis-fifo.c
+++ b/drivers/staging/axis-fifo/axis-fifo.c
@@ -322,11 +322,17 @@ static ssize_t axis_fifo_write(struct file *f, const char __user *buf,
return -EINVAL;
}
- if (words_to_write > fifo->tx_fifo_depth) {
- dev_err(fifo->dt_device, "tried to write more words [%u] than slots in the fifo buffer [%u]\n",
- words_to_write, fifo->tx_fifo_depth);
+ /*
+ * In 'Store-and-Forward' mode, the maximum packet that can be
+ * transmitted is limited by the size of the FIFO, which is
+ * (C_TX_FIFO_DEPTH–4)*(data interface width/8) bytes.
+ *
+ * Do not attempt to send a packet larger than 'tx_fifo_depth - 4',
+ * otherwise a 'Transmit Packet Overrun Error' interrupt will be
+ * raised, which requires a reset of the TX circuit to recover.
+ */
+ if (words_to_write > (fifo->tx_fifo_depth - 4))
return -EINVAL;
- }
if (fifo->write_flags & O_NONBLOCK) {
/*
--
2.50.0
next reply other threads:[~2025-08-02 21:00 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-02 20:59 Ovidiu Panait [this message]
2025-08-17 11:12 ` Greg KH
2025-08-17 16:08 ` Ovidiu Panait
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250802205943.958071-1-ovidiu.panait.oss@gmail.com \
--to=ovidiu.panait.oss@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=gshahrouzi@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®