[PATCH v3 4/5] i2c: rtl9300: Add missing count byte for SMBus Block Ops

[Sven Eckelmann <sven@narfation.org>]

The expected on-wire format of an SMBus Block Write is

  S Addr Wr [A] Comm [A] Count [A] Data [A] Data [A] ... [A] Data [A] P

Everything starting from the Count byte is provided by the I2C subsystem in
the array data->block. But the driver was skipping the Count byte
(data->block[0]) when sending it to the RTL93xx I2C controller.

Only the actual data could be seen on the wire:

  S Addr Wr [A] Comm [A] Data [A] Data [A] ... [A] Data [A] P

This wire format is not SMBus Block Write compatible but matches the format
of an I2C Block Write. Simply adding the count byte to the buffer for the
I2C controller enough to fix the transmission.

This also affects read because the I2C controller must receive the count
byte + $count * data bytes.

Cc: <stable@vger.kernel.org>
Fixes: c366be720235 ("i2c: Add driver for the RTL9300 I2C controller")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
 drivers/i2c/busses/i2c-rtl9300.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-rtl9300.c b/drivers/i2c/busses/i2c-rtl9300.c
index b8e8f416c5658058819dc0c75af7aa5f18f3f7a9..8310675668fdddc9626a5813bee050cc55a61c09 100644
--- a/drivers/i2c/busses/i2c-rtl9300.c
+++ b/drivers/i2c/busses/i2c-rtl9300.c
@@ -288,15 +288,15 @@ static int rtl9300_i2c_smbus_xfer(struct i2c_adapter *adap, u16 addr, unsigned s
 			ret = -EINVAL;
 			goto out_unlock;
 		}
-		ret = rtl9300_i2c_config_xfer(i2c, chan, addr, data->block[0]);
+		ret = rtl9300_i2c_config_xfer(i2c, chan, addr, data->block[0] + 1);
 		if (ret)
 			goto out_unlock;
 		if (read_write == I2C_SMBUS_WRITE) {
-			ret = rtl9300_i2c_write(i2c, &data->block[1], data->block[0]);
+			ret = rtl9300_i2c_write(i2c, &data->block[0], data->block[0] + 1);
 			if (ret)
 				goto out_unlock;
 		}
-		len = data->block[0];
+		len = data->block[0] + 1;
 		break;
 
 	default:

-- 
2.47.2