[PATCH 4/7] clk: imx: add driver for imx8ulp's sim lpav

[Laurentiu Mihalcea <laurentiumihalcea111@gmail.com>]

From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>

The i.MX8ULP System Integration Module (SIM) LPAV module is a block
control module found inside the LPAV subsystem, which offers some clock
gating options and reset line assertion/de-assertion capabilities.

Therefore, the clock gate management is supported by registering the
module's driver as a clock provider, while the reset capabilities are
managed via the auxiliary device API to allow the DT node to act as a
reset and clock provider.

Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
---
 drivers/clk/imx/Makefile               |   1 +
 drivers/clk/imx/clk-imx8ulp-sim-lpav.c | 162 +++++++++++++++++++++++++
 2 files changed, 163 insertions(+)
 create mode 100644 drivers/clk/imx/clk-imx8ulp-sim-lpav.c

diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
index 03f2b2a1ab63..208b46873a18 100644
--- a/drivers/clk/imx/Makefile
+++ b/drivers/clk/imx/Makefile
@@ -41,6 +41,7 @@ clk-imx-lpcg-scu-$(CONFIG_CLK_IMX8QXP) += clk-lpcg-scu.o clk-imx8qxp-lpcg.o
 clk-imx-acm-$(CONFIG_CLK_IMX8QXP) = clk-imx8-acm.o
 
 obj-$(CONFIG_CLK_IMX8ULP) += clk-imx8ulp.o
+obj-$(CONFIG_CLK_IMX8ULP) += clk-imx8ulp-sim-lpav.o
 
 obj-$(CONFIG_CLK_IMX1)   += clk-imx1.o
 obj-$(CONFIG_CLK_IMX25)  += clk-imx25.o
diff --git a/drivers/clk/imx/clk-imx8ulp-sim-lpav.c b/drivers/clk/imx/clk-imx8ulp-sim-lpav.c
new file mode 100644
index 000000000000..2019e0a61216
--- /dev/null
+++ b/drivers/clk/imx/clk-imx8ulp-sim-lpav.c
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2025 NXP
+ */
+
+#include <dt-bindings/clock/imx8ulp-clock.h>
+
+#include <linux/auxiliary_bus.h>
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#define SYSCTRL0 0x8
+
+#define IMX8ULP_HIFI_CLK_GATE(gname, cname, pname, bidx)	\
+	{							\
+		.name = gname"_cg",				\
+		.id = IMX8ULP_CLK_SIM_LPAV_HIFI_##cname,	\
+		.parent = { .fw_name = pname, .name = pname },	\
+		.bit = bidx,					\
+	}
+
+struct clk_imx8ulp_sim_lpav_data {
+	void __iomem *base;
+	struct clk_hw_onecell_data clk_data;
+};
+
+struct clk_imx8ulp_sim_lpav_gate {
+	const char *name;
+	int id;
+	const struct clk_parent_data parent;
+	u8 bit;
+} gates[] = {
+	IMX8ULP_HIFI_CLK_GATE("hifi_core", CORE, "hifi_core", 17),
+	IMX8ULP_HIFI_CLK_GATE("hifi_pbclk", PBCLK, "lpav_bus", 18),
+	IMX8ULP_HIFI_CLK_GATE("hifi_plat", PLAT, "hifi_plat", 19)
+};
+
+#ifdef CONFIG_RESET_CONTROLLER
+static void clk_imx8ulp_sim_lpav_aux_reset_release(struct device *dev)
+{
+	struct auxiliary_device *adev = to_auxiliary_dev(dev);
+
+	kfree(adev);
+}
+
+static void clk_imx8ulp_sim_lpav_unregister_aux_reset(void *data)
+{
+	struct auxiliary_device *adev = data;
+
+	auxiliary_device_delete(adev);
+	auxiliary_device_uninit(adev);
+}
+
+static int clk_imx8ulp_sim_lpav_register_aux_reset(struct platform_device *pdev)
+{
+	struct auxiliary_device *adev __free(kfree) = NULL;
+	int ret;
+
+	adev = kzalloc(sizeof(*adev), GFP_KERNEL);
+	if (!adev)
+		return -ENOMEM;
+
+	adev->name = "reset";
+	adev->dev.parent = &pdev->dev;
+	adev->dev.release = clk_imx8ulp_sim_lpav_aux_reset_release;
+
+	ret = auxiliary_device_init(adev);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to initialize aux dev\n");
+		return ret;
+	}
+
+	ret = auxiliary_device_add(adev);
+	if (ret) {
+		auxiliary_device_uninit(adev);
+		dev_err(&pdev->dev, "failed to add aux dev\n");
+		return ret;
+	}
+
+	return devm_add_action_or_reset(&pdev->dev,
+					clk_imx8ulp_sim_lpav_unregister_aux_reset,
+					no_free_ptr(adev));
+}
+#else
+static int clk_imx8ulp_sim_lpav_register_aux_reset(struct platform_device *pdev)
+{
+	return 0;
+}
+#endif /* CONFIG_RESET_CONTROLLER */
+
+static int clk_imx8ulp_sim_lpav_probe(struct platform_device *pdev)
+{
+	struct clk_imx8ulp_sim_lpav_data *data;
+	struct clk_hw *hw;
+	int i, ret;
+
+	data = devm_kzalloc(&pdev->dev,
+			    struct_size(data, clk_data.hws, IMX8ULP_CLK_SIM_LPAV_END),
+			    GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(data->base))
+		return dev_err_probe(&pdev->dev, PTR_ERR(data->base),
+				     "failed to ioremap base\n");
+
+	data->clk_data.num = IMX8ULP_CLK_SIM_LPAV_END;
+
+	for (i = 0; i < ARRAY_SIZE(gates); i++) {
+		hw = devm_clk_hw_register_gate_parent_data(&pdev->dev,
+							   gates[i].name,
+							   &gates[i].parent,
+							   CLK_SET_RATE_PARENT,
+							   data->base + SYSCTRL0,
+							   gates[i].bit,
+							   0x0, NULL);
+		if (IS_ERR(hw))
+			return dev_err_probe(&pdev->dev, PTR_ERR(hw),
+					     "failed to register %s gate\n",
+					     gates[i].name);
+
+		data->clk_data.hws[i] = hw;
+	}
+
+	ret = clk_imx8ulp_sim_lpav_register_aux_reset(pdev);
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret,
+				     "failed to register aux reset\n");
+
+	ret = devm_of_clk_add_hw_provider(&pdev->dev,
+					  of_clk_hw_onecell_get,
+					  &data->clk_data);
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret,
+				     "failed to register clk hw provider\n");
+
+	/* used to probe MUX child device */
+	return devm_of_platform_populate(&pdev->dev);
+}
+
+static const struct of_device_id clk_imx8ulp_sim_lpav_of_match[] = {
+	{ .compatible = "fsl,imx8ulp-sim-lpav" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, clk_imx8ulp_sim_lpav_of_match);
+
+static struct platform_driver clk_imx8ulp_sim_lpav_driver = {
+	.probe = clk_imx8ulp_sim_lpav_probe,
+	.driver = {
+		.name = "clk-imx8ulp-sim-lpav",
+		.of_match_table = clk_imx8ulp_sim_lpav_of_match,
+	},
+};
+module_platform_driver(clk_imx8ulp_sim_lpav_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("i.MX8ULP LPAV System Integration Module (SIM) clock driver");
+MODULE_AUTHOR("Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>");
-- 
2.34.1