mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Beleswar Padhi <b-padhi@ti.com>
To: <linux@armlinux.org.uk>, <arnd@arndb.de>
Cc: <krzk@kernel.org>, <afd@ti.com>, <u-kumar1@ti.com>,
	<praneeth@ti.com>, <b-padhi@ti.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Subject: [PATCH] arm: multi_v7_defconfig: Enable more OMAP related configs
Date: Wed, 6 Aug 2025 19:48:08 +0530	[thread overview]
Message-ID: <20250806141808.4013462-1-b-padhi@ti.com> (raw)

From: Sinthu Raja <sinthu.raja@ti.com>

This allows us to enable various peripherals in the TI OMAP family
platforms like AM571X-IDK, AM572X-IDK, AM574X-IDK, AM57XX-BEAGLE-X15,
AM57XX-EVM using the multi_v7_defconfig, instead of only with the
OMAP specific defconfigs.

IKCONFIG*:
Allows reading the current kernel configuration through /proc/config.gz

{TI/DRA752}_THERMAL:
Enables TI's bandgap temperature sensor and thermal zone framework for
thermal management on the OMAP SoC family.

THERMAL_EMULATION:
Adds emul_temp sysfs node under thermal zones to allow emulating
temperature changes.

DRM_PANEL_OSD_OSD101T2587_53TS:
TOUCHSCREEN_EDT_FT5X06:
Enables OSD LCD panel and capacitive touchscreen support used in AM57XX
evaluation modules.

SPI_TI_QSPI:
Enables TI's QSPI master controller driver for accessing flash devices
on OMAP5 platforms.

FANOTIFY:
Allows sending open file descriptors to userspace listeners along with
file access events.

USER_NS:
NAMESPACES:
Enable user NS to provide user info of different users for different
process.

POSIX_MQUEUE:
Supports POSIX message queues for priority-based IPC.

BSD_PROCESS_ACCT:
Enables BSD process accounting to allow user space program to write
process accounting information to a file.

bloat-o-meter:
Total: Before=24537037, After=24640034, chg +0.42%

Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Co-developed-by: Carlos Hernandez <ceh@ti.com>
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
---
 arch/arm/configs/multi_v7_defconfig | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index f2822eeefb95..d88177cbf2ce 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -1,7 +1,13 @@
 CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
 CONFIG_CGROUPS=y
+CONFIG_NAMESPACES=y
+CONFIG_USER_NS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
@@ -333,7 +339,7 @@ CONFIG_TOUCHSCREEN_ADC=m
 CONFIG_TOUCHSCREEN_ATMEL_MXT=m
 CONFIG_TOUCHSCREEN_ELAN=m
 CONFIG_TOUCHSCREEN_MMS114=m
-CONFIG_TOUCHSCREEN_EDT_FT5X06=m
+CONFIG_TOUCHSCREEN_EDT_FT5X06=y
 CONFIG_TOUCHSCREEN_WM97XX=m
 CONFIG_TOUCHSCREEN_ST1232=m
 CONFIG_TOUCHSCREEN_STMPE=y
@@ -453,6 +459,7 @@ CONFIG_SPI_GXP=m
 CONFIG_SPI_GPIO=m
 CONFIG_SPI_FSL_DSPI=m
 CONFIG_SPI_OMAP24XX=y
+CONFIG_SPI_TI_QSPI=y
 CONFIG_SPI_ORION=y
 CONFIG_SPI_PL022=y
 CONFIG_SPI_ROCKCHIP=m
@@ -547,6 +554,7 @@ CONFIG_SENSORS_RASPBERRYPI_HWMON=m
 CONFIG_SENSORS_INA2XX=m
 CONFIG_CPU_THERMAL=y
 CONFIG_DEVFREQ_THERMAL=y
+CONFIG_THERMAL_EMULATION=y
 CONFIG_IMX_THERMAL=y
 CONFIG_QORIQ_THERMAL=m
 CONFIG_ROCKCHIP_THERMAL=y
@@ -555,6 +563,8 @@ CONFIG_ARMADA_THERMAL=y
 CONFIG_BCM2711_THERMAL=m
 CONFIG_BCM2835_THERMAL=m
 CONFIG_BRCMSTB_THERMAL=m
+CONFIG_TI_THERMAL=y
+CONFIG_DRA752_THERMAL=y
 CONFIG_ST_THERMAL_MEMMAP=y
 CONFIG_TEGRA_SOCTHERM=m
 CONFIG_TEGRA30_TSENSOR=m
@@ -747,6 +757,7 @@ CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_PANEL_EDP=y
 CONFIG_DRM_PANEL_SAMSUNG_LD9040=m
 CONFIG_DRM_PANEL_ORISETECH_OTM8009A=m
+CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS=y
 CONFIG_DRM_PANEL_RAYDIUM_RM68200=m
 CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=m
 CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m
@@ -1260,6 +1271,7 @@ CONFIG_COUNTER=m
 CONFIG_STM32_LPTIMER_CNT=m
 CONFIG_STM32_TIMER_CNT=m
 CONFIG_EXT4_FS=y
+CONFIG_FANOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-- 
2.34.1


             reply	other threads:[~2025-08-06 14:18 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-08-06 14:18 Beleswar Padhi [this message]
2025-08-06 14:47 ` Andrew Davis
2025-08-06 15:05 ` Krzysztof Kozlowski
2025-08-06 15:41 ` Arnd Bergmann
2025-08-19 10:15   ` Beleswar Prasad Padhi
  -- strict thread matches above, loose matches on Subject: below --
2025-06-11  7:49 Beleswar Padhi
2025-06-11 10:22 ` Krzysztof Kozlowski
2025-06-16  8:27   ` Beleswar Prasad Padhi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250806141808.4013462-1-b-padhi@ti.com \
    --to=b-padhi@ti.com \
    --cc=afd@ti.com \
    --cc=arnd@arndb.de \
    --cc=krzk@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=praneeth@ti.com \
    --cc=u-kumar1@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®