[PATCH] regulator: dt-bindings: Clean-up active-semi,act8945a duplication

["Rob Herring (Arm)" <robh@kernel.org>]

The active-semi,act8945a binding is documented in multiple places. The
charger child node is documented in regulator/active-semi,act8945a.yaml
and power/supply/active-semi,act8945a-charger.yaml. An old text binding
is in mfd/act8945a.txt.

Update the regulator/active-semi,act8945a.yaml with the additional
descriptions and constraints from
power/supply/active-semi,act8945a-charger.yaml, and then remove it and
mfd/act8945a.txt.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 .../devicetree/bindings/mfd/act8945a.txt      | 82 -------------------
 .../supply/active-semi,act8945a-charger.yaml  | 76 -----------------
 .../regulator/active-semi,act8945a.yaml       | 25 ++++--
 3 files changed, 19 insertions(+), 164 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/mfd/act8945a.txt
 delete mode 100644 Documentation/devicetree/bindings/power/supply/active-semi,act8945a-charger.yaml

diff --git a/Documentation/devicetree/bindings/mfd/act8945a.txt b/Documentation/devicetree/bindings/mfd/act8945a.txt
deleted file mode 100644
index 5ca75d888b4a..000000000000
--- a/Documentation/devicetree/bindings/mfd/act8945a.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-Device-Tree bindings for Active-semi ACT8945A MFD driver
-
-Required properties:
- - compatible: "active-semi,act8945a".
- - reg: the I2C slave address for the ACT8945A chip
-
-The chip exposes two subdevices:
- - a regulators: see ../regulator/act8945a-regulator.txt
- - a charger: see ../power/act8945a-charger.txt
-
-Example:
-	pmic@5b {
-		compatible = "active-semi,act8945a";
-		reg = <0x5b>;
-
-		active-semi,vsel-high;
-
-		regulators {
-			vdd_1v35_reg: REG_DCDC1 {
-				regulator-name = "VDD_1V35";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-
-			vdd_1v2_reg: REG_DCDC2 {
-				regulator-name = "VDD_1V2";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-			};
-
-			vdd_3v3_reg: REG_DCDC3 {
-				regulator-name = "VDD_3V3";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_fuse_reg: REG_LDO1 {
-				regulator-name = "VDD_FUSE";
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-always-on;
-			};
-
-			vdd_3v3_lp_reg: REG_LDO2 {
-				regulator-name = "VDD_3V3_LP";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_led_reg: REG_LDO3 {
-				regulator-name = "VDD_LED";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_sdhc_1v8_reg: REG_LDO4 {
-				regulator-name = "VDD_SDHC_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-		};
-
-		charger {
-			compatible = "active-semi,act8945a-charger";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
-			interrupt-parent = <&pioA>;
-			interrupts = <45 IRQ_TYPE_LEVEL_LOW>;
-
-			active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
-			active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
-			active-semi,input-voltage-threshold-microvolt = <6600>;
-			active-semi,precondition-timeout = <40>;
-			active-semi,total-timeout = <3>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/power/supply/active-semi,act8945a-charger.yaml b/Documentation/devicetree/bindings/power/supply/active-semi,act8945a-charger.yaml
deleted file mode 100644
index 5220d9cb16d8..000000000000
--- a/Documentation/devicetree/bindings/power/supply/active-semi,act8945a-charger.yaml
+++ /dev/null
@@ -1,76 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/power/supply/active-semi,act8945a-charger.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Active-semi ACT8945A Charger Function
-
-maintainers:
-  - Sebastian Reichel <sre@kernel.org>
-
-allOf:
-  - $ref: power-supply.yaml#
-
-properties:
-  compatible:
-    const: active-semi,act8945a-charger
-
-  interrupts:
-    maxItems: 1
-
-  active-semi,chglev-gpios:
-    maxItems: 1
-    description: charge current level GPIO
-
-  active-semi,lbo-gpios:
-    maxItems: 1
-    description: low battery voltage detect GPIO
-
-  active-semi,input-voltage-threshold-microvolt:
-    description: |
-      Specifies the charger's input over-voltage threshold value.
-      Despite the name, specified values are in millivolt (mV).
-      Defaults to 6.6 V
-    enum: [ 6600, 7000, 7500, 8000 ]
-
-  active-semi,precondition-timeout:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    description: |
-      Specifies the charger's PRECONDITION safety timer setting value in minutes.
-      If 0, it means to disable this timer.
-      Defaults to 40 minutes.
-    enum: [ 0, 40, 60, 80 ]
-
-  active-semi,total-timeout:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    description: |
-      Specifies the charger's total safety timer setting value in hours;
-      If 0, it means to disable this timer;
-      Defaults to 3 hours.
-    enum: [ 0, 3, 4, 5 ]
-
-required:
-  - compatible
-  - interrupts
-  - active-semi,chglev-gpios
-  - active-semi,lbo-gpios
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/gpio/gpio.h>
-    #include <dt-bindings/interrupt-controller/irq.h>
-    pmic {
-      charger {
-        compatible = "active-semi,act8945a-charger";
-        interrupt-parent = <&pioA>;
-        interrupts = <45 IRQ_TYPE_LEVEL_LOW>;
-        active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
-        active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
-        active-semi,input-voltage-threshold-microvolt = <6600>;
-        active-semi,precondition-timeout = <40>;
-        active-semi,total-timeout = <3>;
-      };
-    };
diff --git a/Documentation/devicetree/bindings/regulator/active-semi,act8945a.yaml b/Documentation/devicetree/bindings/regulator/active-semi,act8945a.yaml
index bdf3f7d34ef5..a8d579844dc7 100644
--- a/Documentation/devicetree/bindings/regulator/active-semi,act8945a.yaml
+++ b/Documentation/devicetree/bindings/regulator/active-semi,act8945a.yaml
@@ -91,28 +91,41 @@ properties:
         maxItems: 1
 
       active-semi,chglev-gpios:
-        description: CGHLEV GPIO
+        description: charge current level GPIO
         maxItems: 1
 
       active-semi,lbo-gpios:
-        description: LBO GPIO
+        description: low battery voltage detect GPIO
         maxItems: 1
 
       active-semi,input-voltage-threshold-microvolt:
-        description: Input voltage threshold
-        maxItems: 1
+        description:
+          Specifies the charger's input over-voltage threshold value. Despite
+          the name, specified values are in millivolt (mV).
+        enum: [ 6600, 7000, 7500, 8000 ]
+        default: 6600
 
       active-semi,precondition-timeout:
-        description: Precondition timeout
+        description:
+          Specifies the charger's PRECONDITION safety timer setting value in
+          minutes. If 0, it means to disable this timer.
+        enum: [ 0, 40, 60, 80 ]
+        default: 40
         $ref: /schemas/types.yaml#/definitions/uint32
 
       active-semi,total-timeout:
-        description: Total timeout
+        description:
+          Specifies the charger's total safety timer setting value in hours; If
+          0, it means to disable this timer;
+        enum: [ 0, 3, 4, 5 ]
+        default: 3
         $ref: /schemas/types.yaml#/definitions/uint32
 
     required:
       - compatible
       - interrupts
+      - active-semi,chglev-gpios
+      - active-semi,lbo-gpios
 
 additionalProperties: false
 
-- 
2.47.2