From: Antoniu Miclaus <antoniu.miclaus@analog.com>
To: <jic23@kernel.org>, <robh@kernel.org>, <conor+dt@kernel.org>,
<linux-iio@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<devicetree@vger.kernel.org>
Cc: Antoniu Miclaus <antoniu.miclaus@analog.com>
Subject: [PATCH v3 1/4] iio: add power and energy measurement modifiers
Date: Fri, 8 Aug 2025 14:10:13 +0000 [thread overview]
Message-ID: <20250808141020.4384-2-antoniu.miclaus@analog.com> (raw)
In-Reply-To: <20250808141020.4384-1-antoniu.miclaus@analog.com>
Add new IIO modifiers to support power and energy measurement devices:
Power modifiers:
- IIO_MOD_ACTIVE: Real power consumed by the load
- IIO_MOD_REACTIVE: Power that oscillates between source and load
- IIO_MOD_APPARENT: Magnitude of complex power
- IIO_MOD_FUND_REACTIVE: Reactive power at fundamental frequency
- IIO_MOD_FACTOR: Power factor (ratio of active to apparent power)
Signal quality modifiers:
- IIO_MOD_RMS: Root Mean Square value
These modifiers enable proper representation of power measurement
devices like energy meters and power analyzers.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
---
changes in v3:
- remove accumulated energy modifiers
- rename power_factor to powerfactor for consistency
Documentation/ABI/testing/sysfs-bus-iio | 11 +++++++++++
drivers/iio/industrialio-core.c | 5 +++++
include/linux/iio/types.h | 1 +
include/uapi/linux/iio/types.h | 4 ++++
4 files changed, 21 insertions(+)
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 2fb2cea4b192..28f51e4cc367 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -167,7 +167,12 @@ Description:
is required is a consistent labeling. Units after application
of scale and offset are millivolts.
+What: /sys/bus/iio/devices/iio:deviceX/in_altvoltageY_rms_raw
+
What: /sys/bus/iio/devices/iio:deviceX/in_powerY_raw
+What: /sys/bus/iio/devices/iio:deviceX/in_powerY_active_raw
+What: /sys/bus/iio/devices/iio:deviceX/in_powerY_reactive_raw
+What: /sys/bus/iio/devices/iio:deviceX/in_powerY_apparent_raw
KernelVersion: 4.5
Contact: linux-iio@vger.kernel.org
Description:
@@ -176,6 +181,8 @@ Description:
unique to allow association with event codes. Units after
application of scale and offset are milliwatts.
+What: /sys/bus/iio/devices/iio:deviceX/in_powerY_powerfactor
+
What: /sys/bus/iio/devices/iio:deviceX/in_capacitanceY_raw
KernelVersion: 3.2
Contact: linux-iio@vger.kernel.org
@@ -1569,6 +1576,9 @@ Description:
What: /sys/.../iio:deviceX/in_energy_input
What: /sys/.../iio:deviceX/in_energy_raw
+What: /sys/.../iio:deviceX/in_energyY_active_raw
+What: /sys/.../iio:deviceX/in_energyY_reactive_raw
+What: /sys/.../iio:deviceX/in_energyY_apparent_raw
KernelVersion: 4.0
Contact: linux-iio@vger.kernel.org
Description:
@@ -1692,6 +1702,7 @@ Description:
What: /sys/bus/iio/devices/iio:deviceX/in_currentY_raw
What: /sys/bus/iio/devices/iio:deviceX/in_currentY_supply_raw
+What: /sys/bus/iio/devices/iio:deviceX/in_currentY_rms_raw
KernelVersion: 3.17
Contact: linux-iio@vger.kernel.org
Description:
diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
index f13c3aa470d7..b046c4bc8486 100644
--- a/drivers/iio/industrialio-core.c
+++ b/drivers/iio/industrialio-core.c
@@ -152,6 +152,10 @@ static const char * const iio_modifier_names[] = {
[IIO_MOD_PITCH] = "pitch",
[IIO_MOD_YAW] = "yaw",
[IIO_MOD_ROLL] = "roll",
+ [IIO_MOD_RMS] = "rms",
+ [IIO_MOD_ACTIVE] = "active",
+ [IIO_MOD_REACTIVE] = "reactive",
+ [IIO_MOD_APPARENT] = "apparent",
};
/* relies on pairs of these shared then separate */
@@ -189,6 +193,7 @@ static const char * const iio_chan_info_postfix[] = {
[IIO_CHAN_INFO_ZEROPOINT] = "zeropoint",
[IIO_CHAN_INFO_TROUGH] = "trough_raw",
[IIO_CHAN_INFO_CONVDELAY] = "convdelay",
+ [IIO_CHAN_INFO_POWERFACTOR] = "powerfactor",
};
/**
* iio_device_id() - query the unique ID for the device
diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h
index ad2761efcc83..34eebad12d2c 100644
--- a/include/linux/iio/types.h
+++ b/include/linux/iio/types.h
@@ -70,6 +70,7 @@ enum iio_chan_info_enum {
IIO_CHAN_INFO_ZEROPOINT,
IIO_CHAN_INFO_TROUGH,
IIO_CHAN_INFO_CONVDELAY,
+ IIO_CHAN_INFO_POWERFACTOR,
};
#endif /* _IIO_TYPES_H_ */
diff --git a/include/uapi/linux/iio/types.h b/include/uapi/linux/iio/types.h
index 3eb0821af7a4..0afda9ec2379 100644
--- a/include/uapi/linux/iio/types.h
+++ b/include/uapi/linux/iio/types.h
@@ -108,6 +108,10 @@ enum iio_modifier {
IIO_MOD_ROLL,
IIO_MOD_LIGHT_UVA,
IIO_MOD_LIGHT_UVB,
+ IIO_MOD_RMS,
+ IIO_MOD_ACTIVE,
+ IIO_MOD_REACTIVE,
+ IIO_MOD_APPARENT,
};
enum iio_event_type {
--
2.43.0
next prev parent reply other threads:[~2025-08-08 14:11 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-08 14:10 [PATCH v3 0/4] iio: adc: add support for ADE9000 Energy Monitoring IC Antoniu Miclaus
2025-08-08 14:10 ` Antoniu Miclaus [this message]
2025-08-12 0:37 ` [PATCH v3 1/4] iio: add power and energy measurement modifiers David Lechner
2025-08-08 14:10 ` [PATCH v3 2/4] dt-bindings: iio: adc: add ade9000 Antoniu Miclaus
2025-08-10 15:18 ` Marcelo Schmitt
2025-08-13 23:24 ` Rob Herring
2025-08-08 14:10 ` [PATCH v3 3/4] iio: adc: add ade9000 support Antoniu Miclaus
2025-08-08 15:23 ` Nuno Sá
2025-08-10 15:44 ` Marcelo Schmitt
2025-08-10 17:35 ` Christophe JAILLET
2025-08-08 14:10 ` [PATCH v3 4/4] Documentation: ABI: iio: add sinc4+lp Antoniu Miclaus
2025-08-10 15:25 ` Marcelo Schmitt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250808141020.4384-2-antoniu.miclaus@analog.com \
--to=antoniu.miclaus@analog.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®