From: Tianling Shen <cnsztl@gmail.com>
To: Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
Tudor Ambarus <tudor.ambarus@linaro.org>,
Mark Brown <broonie@kernel.org>, Tianling Shen <cnsztl@gmail.com>
Cc: linux-kernel@vger.kernel.org, linux-mtd@lists.infradead.org
Subject: [PATCH] mtd: spinand: add support for FudanMicro FM25S01A
Date: Sun, 10 Aug 2025 21:38:52 +0800 [thread overview]
Message-ID: <20250810133852.52389-1-cnsztl@gmail.com> (raw)
Add support for FudanMicro FM25S01A SPI NAND.
Datasheet: http://eng.fmsh.com/nvm/FM25S01A_ds_eng.pdf
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
---
drivers/mtd/nand/spi/Makefile | 2 +-
drivers/mtd/nand/spi/core.c | 1 +
drivers/mtd/nand/spi/fmsh.c | 74 +++++++++++++++++++++++++++++++++++
include/linux/mtd/spinand.h | 1 +
4 files changed, 77 insertions(+), 1 deletion(-)
create mode 100644 drivers/mtd/nand/spi/fmsh.c
diff --git a/drivers/mtd/nand/spi/Makefile b/drivers/mtd/nand/spi/Makefile
index 258da42451a4..e288742ea8f0 100644
--- a/drivers/mtd/nand/spi/Makefile
+++ b/drivers/mtd/nand/spi/Makefile
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-spinand-objs := core.o otp.o
+spinand-objs := core.o fmsh.o otp.o
spinand-objs += alliancememory.o ato.o esmt.o foresee.o gigadevice.o macronix.o
spinand-objs += micron.o paragon.o skyhigh.o toshiba.o winbond.o xtx.o
obj-$(CONFIG_MTD_SPI_NAND) += spinand.o
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index b0898990b2a5..ea47028d021a 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -1184,6 +1184,7 @@ static const struct spinand_manufacturer *spinand_manufacturers[] = {
&alliancememory_spinand_manufacturer,
&ato_spinand_manufacturer,
&esmt_c8_spinand_manufacturer,
+ &fmsh_spinand_manufacturer,
&foresee_spinand_manufacturer,
&gigadevice_spinand_manufacturer,
¯onix_spinand_manufacturer,
diff --git a/drivers/mtd/nand/spi/fmsh.c b/drivers/mtd/nand/spi/fmsh.c
new file mode 100644
index 000000000000..8b2097bfc771
--- /dev/null
+++ b/drivers/mtd/nand/spi/fmsh.c
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020-2021 Rockchip Electronics Co., Ltd.
+ *
+ * Author: Dingqiang Lin <jon.lin@rock-chips.com>
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/mtd/spinand.h>
+
+#define SPINAND_MFR_FMSH 0xA1
+
+static SPINAND_OP_VARIANTS(read_cache_variants,
+ SPINAND_PAGE_READ_FROM_CACHE_1S_4S_4S_OP(0, 2, NULL, 0, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_1S_1S_4S_OP(0, 1, NULL, 0, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_1S_2S_2S_OP(0, 1, NULL, 0, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_1S_1S_2S_OP(0, 1, NULL, 0, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_FAST_1S_1S_1S_OP(0, 1, NULL, 0, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_1S_1S_1S_OP(0, 1, NULL, 0, 0));
+
+static SPINAND_OP_VARIANTS(write_cache_variants,
+ SPINAND_PROG_LOAD_1S_1S_4S_OP(true, 0, NULL, 0),
+ SPINAND_PROG_LOAD_1S_1S_1S_OP(true, 0, NULL, 0));
+
+static SPINAND_OP_VARIANTS(update_cache_variants,
+ SPINAND_PROG_LOAD_1S_1S_4S_OP(false, 0, NULL, 0),
+ SPINAND_PROG_LOAD_1S_1S_1S_OP(false, 0, NULL, 0));
+
+static int fm25s01a_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *region)
+{
+ return -ERANGE;
+}
+
+static int fm25s01a_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *region)
+{
+ if (section)
+ return -ERANGE;
+
+ region->offset = 2;
+ region->length = 62;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops fm25s01a_ooblayout = {
+ .ecc = fm25s01a_ooblayout_ecc,
+ .free = fm25s01a_ooblayout_free,
+};
+
+static const struct spinand_info fmsh_spinand_table[] = {
+ SPINAND_INFO("FM25S01A",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xE4),
+ NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
+ NAND_ECCREQ(1, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ SPINAND_HAS_QE_BIT,
+ SPINAND_ECCINFO(&fm25s01a_ooblayout, NULL)),
+};
+
+static const struct spinand_manufacturer_ops fmsh_spinand_manuf_ops = {
+};
+
+const struct spinand_manufacturer fmsh_spinand_manufacturer = {
+ .id = SPINAND_MFR_FMSH,
+ .name = "Fudan Micro",
+ .chips = fmsh_spinand_table,
+ .nchips = ARRAY_SIZE(fmsh_spinand_table),
+ .ops = &fmsh_spinand_manuf_ops,
+};
diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
index 27a45bdab7ec..927c10d78769 100644
--- a/include/linux/mtd/spinand.h
+++ b/include/linux/mtd/spinand.h
@@ -355,6 +355,7 @@ struct spinand_manufacturer {
extern const struct spinand_manufacturer alliancememory_spinand_manufacturer;
extern const struct spinand_manufacturer ato_spinand_manufacturer;
extern const struct spinand_manufacturer esmt_c8_spinand_manufacturer;
+extern const struct spinand_manufacturer fmsh_spinand_manufacturer;
extern const struct spinand_manufacturer foresee_spinand_manufacturer;
extern const struct spinand_manufacturer gigadevice_spinand_manufacturer;
extern const struct spinand_manufacturer macronix_spinand_manufacturer;
--
2.50.1
next reply other threads:[~2025-08-10 13:39 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-10 13:38 Tianling Shen [this message]
2025-08-24 15:46 ` Miquel Raynal
2025-08-24 17:04 ` Tianling Shen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250810133852.52389-1-cnsztl@gmail.com \
--to=cnsztl@gmail.com \
--cc=broonie@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=tudor.ambarus@linaro.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®