mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Thomas Richard <thomas.richard@bootlin.com>
To: Linus Walleij <linus.walleij@linaro.org>,
	 Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	 Bartosz Golaszewski <brgl@bgdev.pl>,
	 Geert Uytterhoeven <geert+renesas@glider.be>,
	Kees Cook <kees@kernel.org>,  Andy Shevchenko <andy@kernel.org>
Cc: linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
	 thomas.petazzoni@bootlin.com, DanieleCleri@aaeon.eu,
	GaryWang@aaeon.com.tw,  linux-hardening@vger.kernel.org,
	 Thomas Richard <thomas.richard@bootlin.com>
Subject: [PATCH v9 03/10] gpio: aggregator: refactor the code to add GPIO desc in the forwarder
Date: Mon, 11 Aug 2025 15:25:46 +0200	[thread overview]
Message-ID: <20250811-aaeon-up-board-pinctrl-support-v9-3-29f0cbbdfb30@bootlin.com> (raw)
In-Reply-To: <20250811-aaeon-up-board-pinctrl-support-v9-0-29f0cbbdfb30@bootlin.com>

Create a dedicated function to add a GPIO desc in the forwarder. Instead of
saving a GPIO descs array pointer, now the GPIO descs are passed one by one
to the forwarder which registers them in its own array. So after the call
of gpiochip_fwd_create(), the passed array can be free.

Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
---
 drivers/gpio/gpio-aggregator.c | 59 ++++++++++++++++++++++++++++--------------
 1 file changed, 40 insertions(+), 19 deletions(-)

diff --git a/drivers/gpio/gpio-aggregator.c b/drivers/gpio/gpio-aggregator.c
index 75c8d0deef2fe25faa61bd5b48af3e74e3817957..43e488ee83834417b12bd23b177cc74b7d28faef 100644
--- a/drivers/gpio/gpio-aggregator.c
+++ b/drivers/gpio/gpio-aggregator.c
@@ -485,6 +485,10 @@ devm_gpiochip_fwd_alloc(struct device *dev, unsigned int ngpios)
 	if (!fwd)
 		return ERR_PTR(-ENOMEM);
 
+	fwd->descs = devm_kcalloc(dev, ngpios, sizeof(*fwd->descs), GFP_KERNEL);
+	if (!fwd->descs)
+		return ERR_PTR(-ENOMEM);
+
 	chip = &fwd->chip;
 
 	chip->label = dev_name(dev);
@@ -504,13 +508,43 @@ devm_gpiochip_fwd_alloc(struct device *dev, unsigned int ngpios)
 	return fwd;
 }
 
+static int gpiochip_fwd_desc_add(struct gpiochip_fwd *fwd,
+				 struct gpio_desc *desc,
+				 unsigned int offset)
+{
+	struct gpio_chip *parent = gpiod_to_chip(desc);
+	struct gpio_chip *chip = &fwd->chip;
+
+	if (offset > chip->ngpio)
+		return -EINVAL;
+
+	/*
+	 * If any of the GPIO lines are sleeping, then the entire forwarder
+	 * will be sleeping.
+	 * If any of the chips support .set_config(), then the forwarder will
+	 * support setting configs.
+	 */
+	if (gpiod_cansleep(desc))
+		chip->can_sleep = true;
+
+	if (parent && parent->set_config)
+		chip->set_config = gpio_fwd_set_config;
+
+	fwd->descs[offset] = desc;
+
+	dev_dbg(chip->parent, "%u => gpio %d irq %d\n", offset,
+		desc_to_gpio(desc), gpiod_to_irq(desc));
+
+	return 0;
+}
+
 /**
  * gpiochip_fwd_create() - Create a new GPIO forwarder
  * @dev: Parent device pointer
  * @ngpios: Number of GPIOs in the forwarder.
  * @descs: Array containing the GPIO descriptors to forward to.
- *         This array must contain @ngpios entries, and must not be deallocated
- *         before the forwarder has been destroyed again.
+ *         This array must contain @ngpios entries, and can be deallocated
+ *         as the forwarder has its own array.
  * @features: Bitwise ORed features as defined with FWD_FEATURE_*.
  *
  * This function creates a new gpiochip, which forwards all GPIO operations to
@@ -535,26 +569,12 @@ static struct gpiochip_fwd *gpiochip_fwd_create(struct device *dev,
 
 	chip = &fwd->chip;
 
-	/*
-	 * If any of the GPIO lines are sleeping, then the entire forwarder
-	 * will be sleeping.
-	 * If any of the chips support .set_config(), then the forwarder will
-	 * support setting configs.
-	 */
 	for (i = 0; i < ngpios; i++) {
-		struct gpio_chip *parent = gpiod_to_chip(descs[i]);
-
-		dev_dbg(dev, "%u => gpio %d irq %d\n", i,
-			desc_to_gpio(descs[i]), gpiod_to_irq(descs[i]));
-
-		if (gpiod_cansleep(descs[i]))
-			chip->can_sleep = true;
-		if (parent && parent->set_config)
-			chip->set_config = gpio_fwd_set_config;
+		error = gpiochip_fwd_desc_add(fwd, descs[i], i);
+		if (error)
+			return ERR_PTR(error);
 	}
 
-	fwd->descs = descs;
-
 	if (chip->can_sleep)
 		mutex_init(&fwd->mlock);
 	else
@@ -1348,6 +1368,7 @@ static int gpio_aggregator_probe(struct platform_device *pdev)
 		return PTR_ERR(fwd);
 
 	platform_set_drvdata(pdev, fwd);
+	devm_kfree(dev, descs);
 	return 0;
 }
 

-- 
2.47.2


  parent reply	other threads:[~2025-08-11 13:26 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-08-11 13:25 [PATCH v9 00/10] Add pinctrl support for the AAEON UP board FPGA Thomas Richard
2025-08-11 13:25 ` [PATCH v9 01/10] gpiolib: add support to register sparse pin range Thomas Richard
2025-08-11 13:25 ` [PATCH v9 02/10] gpio: aggregator: move GPIO forwarder allocation in a dedicated function Thomas Richard
2025-08-11 13:25 ` Thomas Richard [this message]
2025-08-11 13:25 ` [PATCH v9 04/10] gpio: aggregator: refactor the forwarder registration part Thomas Richard
2025-08-11 13:25 ` [PATCH v9 05/10] gpio: aggregator: update gpiochip_fwd_setup_delay_line() parameters Thomas Richard
2025-08-11 13:25 ` [PATCH v9 06/10] gpio: aggregator: export symbols of the GPIO forwarder library Thomas Richard
2025-08-11 13:25 ` [PATCH v9 07/10] gpio: aggregator: handle runtime registration of gpio_desc in gpiochip_fwd Thomas Richard
2025-08-11 13:25 ` [PATCH v9 08/10] gpio: aggregator: add possibility to attach data to the forwarder Thomas Richard
2025-08-11 13:25 ` [PATCH v9 09/10] lib/string_choices: Add str_input_output() helper Thomas Richard
2025-08-11 13:25 ` [PATCH v9 10/10] pinctrl: Add pin controller driver for AAEON UP boards Thomas Richard
2025-08-18 15:45   ` Linus Walleij
2025-08-11 13:48 ` (subset) [PATCH v9 00/10] Add pinctrl support for the AAEON UP board FPGA Bartosz Golaszewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250811-aaeon-up-board-pinctrl-support-v9-3-29f0cbbdfb30@bootlin.com \
    --to=thomas.richard@bootlin.com \
    --cc=DanieleCleri@aaeon.eu \
    --cc=GaryWang@aaeon.com.tw \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=andy@kernel.org \
    --cc=brgl@bgdev.pl \
    --cc=geert+renesas@glider.be \
    --cc=kees@kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-hardening@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®